• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.89-94
• /
• 2014

The 4th generation SFR is being designed with a milestone of construction by 2028. It is important to understand the subchannel flow characteristics in fuel assembly through the experimental investigations and to estimate the calculation uncertainties for insuring the confidence of the design code calculation results. The friction coefficient and the mixing coefficient are selected as primary parameters. The two parameters are related to the flow distribution and diffusion. To identify the flow distribution, an iso-kinetic method was developed based on the previous study. For the mixing parameters, a wire mesh system and a laser induced fluorescence methods were developed in parallel. The measuring systems were adopted on 37 rod bundle test geometry, which was developed based on the Euler number scaling. A scaling method for a design of experimental facility and the experimental identification techniques for the flow distribution and mixing parameters were developed based on the measurement requirement.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.295-300
• /
• 2001

Additional costs as well as schedule delay are occurred due to change orders in today's construction projects. Additional costs, overhead calculation methods are of various types. In a foreign country cases, many claims related to the loss of labor productivity quote research statistics data. In domestic cases, the study of the reason why the loss of labor productivity occurs and its effect have not been performed. Therefore, this paper analyzes factors affecting lost productivity and a methodology is presented to estimate the lost productivity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.767-775
• /
• 2014

New material design has obtained tremendous attention in material science community as the performance of new materials, especially in nano length scale, could be greatly improved to applied in modern industry. In certain conditions limiting experimental synthesis of these new materials, new approach by computer simulation has been proposed to be applied, being able to save time and cost. Recent development of computer systems with high speed, large memory, and parallel algorithms enables to analyze individual atoms using first principle calculation to predict quantum phenomena. Beyond the quantum level calculations, mesoscopic scale and continuum limit can be addressed either individually or together as a multi-scale approach. In this article, we introduced current endeavors on material design using analytical theory and computer simulations in multi-length scales and on multi-physical properties. Some of the physical phenomena was shown to be interconnected via a cross-link rule called 'cross-property relation'. It is suggested that the computer simulation approach by multi-physics analysis can be efficiently applied to design new materials for multi-functional characteristics.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.12
• /
• pp.469-476
• /
• 2018

In order to jointly utilize research infrastructure and to build efficient construction, which are essential in science and technology research and development process. Although various classification methods have been introduced for efficient utilization of registered information, functions that can be directly utilized such as similar research infrastructure search is not yet been implemented due to limitations of collection information. In this study, we analyzed the similar search technique so far, presented the methodology for the calculation of similarity of research infrastructure, and analyzed the learning result. Study suggested that a technique can be use to extract meaningful keywords from information and analyze the similarity between the research infrastructure.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2147-2155
• /
• 2022

Nuclear safety-related underground liquid storage tanks, such as those used to store fuel for emergency diesel generators, are critical components for safety of hundreds of existing nuclear power plants (NPP) worldwide. Since most of those NPP will continue to operate for decades, a beyond design base (BDB) seismic screening of safety-related underground tanks in those NPP is beneficial and essential to public safety. The analytical methodology for buried tank subjected to seismic effect, including a BDB seismic evaluation, needs to consider both soil-structure and fluid-structure interaction effects. Comprehensive analysis of such a soil-structure-fluid system is costly and time consuming, often subjected to availability of state-of-art finite element tools. Simple, but practically and reasonably accurate techniques for seismic evaluation of underground liquid storage tanks have not been established. In this study, a mechanics based solution is proposed for the evaluation of a cylindrical underground liquid storage tank using hand calculation methods. For validation, a practical example of two underground diesel fuel tanks in an existing nuclear power plant is presented and application of the proposed method is confirmed by using published results of the computer-aided System for Analysis of Soil Structural Interaction (SASSI). The proposed approach provides an easy to use tool for BDB seismic assessment prior to making decision of applying more costly technique by owner of the nuclear facility.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.790-802
• /
• 2022

Large-scale reactor simulation often requires the use of Monte Carlo calculation techniques to estimate important reactor parameters. One drawback of these Monte Carlo calculation techniques is they inevitably result in some uncertainty in calculated quantities. The present study includes parametric uncertainty quantification (UQ) and sensitivity analysis (SA) on the Advanced Test Reactor Critical (ATRC) facility housed at Idaho National Laboratory (INL) and addresses some complications due to Monte Carlo uncertainty when performing these analyses. This approach for UQ/SA includes consideration of Monte Carlo code uncertainty in computed sensitivities, consideration of uncertainty from directly measured parameters and a comparison of results obtained from brute-force Monte Carlo UQ versus UQ obtained from a surrogate model. These methodologies are applied to the uncertainty and sensitivity of k_eff for two sets of uncertain parameters involving fuel plate geometry and fuel plate composition. Results indicate that the less computationally-expensive method for uncertainty quantification involving a linear surrogate model provides accurate estimations for k_eff uncertainty and the Monte Carlo uncertainty in calculated k_eff values can have a large effect on computed linear model parameters for parameters with low influence on k_eff.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.246-259
• /
• 2021

IMO stability regulations include various stability parameters such as GM values. To assess the stability of the ships, we should check all stability parameters of the IMO requirements. However, since this process is complex, a more convenient way to evaluate stability performance is required. In this research, the index for marine ship intact stability assessment (IMSISA) model was developed to solve these problems. The IMSISA model consists of a stability index calculation module and a stability assessment module. In the stability index calculation module, ten stability parameters, including GM, were used to develop the stability index, which has the advantage of being able to quantify the ship stability. The stability assessment module uses the stability index value to determine the stability status of the ship and provides the captain with stability management guidelines. To verify the proposed model, the basic stability calculations were performed for two model ships in 32 loading situations. The proposed model was found to provide better performance in the stability assessment than the previous study. By applying the IMSISA model to the ships, the captain can assess the ship stability more quantitatively and efficiently.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.69-70
• /
• 2020

Accidents in the construction industry are very high compared to other industries, and the number is also increasing steeply every year. Relevant studies were limited for solving the problems. The purpose of this study is to develop a comprehensive risk prediction process for personnel deployed at construction sites on safety management. First of all, the variables were divided into fixed, real-time and working types variables, and the relevant comprehensive data were collected. Second, the probability of a disaster was derived based on the collected data, and weights for each variable were calculated using the dummy regression analysis method using statistical methodology. Lastly, the resulting weighting and disaster probability equation was constructed, and The Final Risk Calculation Formula was developed. The Final Risk Calculation Formula presented in this study is expected to have a significant impact on the establishment of effective safety management measures to prevent possible safety accidents at construction sites

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.131-138
• /
• 2006

Methods of back calculation for either design procedures or elastic moduli obtained from FWD(Falling Weight Deflectometer) tests have widely been used to predict remaining life of airfield concrete pavements. Since the variation of the elastic modulus obtained from the FWD test depends on the back calculation methods, prediction of remaining life of airfield pavement using the back calculation method has not been reliable. In addition, the FWD method only concentrates on the structural integrity of the pavement without considering functional distress. In this study, a newly developed remaining life estimation procedure is proposed. This methodology includes both structural and functional consideration and suggests models and decision criteria for each stage. In order to improve the estimation procedure on remaining life of pavement, conducted the several tests on an old airfield concrete pavement. As a result, it is concluded that the load transfer efficiency on joint is better for predicting remaining life of pavement than the elastic modulus, which is commonly used. In order to verify applicability of the newly developed estimation procedure and detailed models, investigation and analysis were conducted according to the new methodology on C-airfield pavement. Finally, it is confirmed that the efficiency of the proposed method for practical application was good enough.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.91-100
• /
• 2004

Plate heat exchangers (PHE) have been widely used in different industrial applications, because of high heat transfer efficiency per unit volume. Basic study is performed for PHE to the application of intercooler in automobile. In order to understand the flow phenomena in the plate heat exchanger, a channel which was formed by the upper and lower plate in single plate was considered as calculation domains. Because chevrons attached on the upper plate are brazed with chevrons attached on the lower plate, the flow channel has very complex configuration. This complex geometry was analyzed by Fluent. In order to validate this methodology the proper experimental and theoretical data are collected and compared with numerical results. Finally, due to the lack of experimental values for PHE to the application of intercooler, various chevron angles and air velocities at inlet were tested in terms of physical phenomena. From this point of view, results of velocity vector, path lines, static pressure, heat flux, heat transfer coefficient, and Nusselt number are physically reasonable and accepted for the solutions. From these results, the correlations for pressure drop and Nusselt number with respect to chevron angle and Reynolds number in specific PHE are obtained for the design purpose. Thus, the methodology of the flow analysis in the full geometry of the channel was established for the predictions of performance in plate heat exchanger.