• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.155-159
• /
• 2007

Blue light-emitting phosphors having the excitation spectrum range of the medium-long ultraviolet ($280nm{\sim}400nm$) have been prepared by solid state reaction method. As a starting material the natural alkaline feldspar powder produced from the domestic mine field in Buyeo, Chungnam-do. The photoluminescence characteristics and crystal structures have been analyzed for the phosphor samples. The powder mixture of the natural alkaline feldspar and the rare-earth oxide was calcined at $800{\sim}1000^{\circ}C\;for\;3{\sim}4h$ in air. The calcined samples we fully ground at room temperature and then heat-treated in the mild reducing gas atmosphere of $5%H_2-95%N_2$ mixture at $1100{\sim}1150^{\circ}C\;for\;3{\sim}4h$. The natural alkaline feldspar material consists of the monoclinic orthoclase ($KAlSi_3O_8$) and the triclinic albite ($NaAlSi_3O_8$) phases. At the $0.5wt%Eu_2O_3$ addition the PL spectrum showed the maximum intensity and with further increase of $Eu_2O_3$ the PL intensity decreased. The albite phase disappeared in the $Eu_2O_3$ doped phosphors. The effect of the co-doped activator on the PL characteristics have been also discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1420-1421
• /
• 2006

In this study, structural and micowave dielectric properties of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) cation-deficient perovskite ceeramics. The specimens are prepared through the solid-state route. According to the XRD pattern, $Mg_{4}Ta_{2}O_9$ and $MgTa_{2}O_6$ phase exist in calcined and sintered $Mg_{5}Ta_{4}O_{15}$ powder. Also $Mg_{5}Ta_{4}O_{15}$ phase added with increasing sintering temperature. In the case of calcined and sintered $Mg_{5}Nb_{4}O_{15}$ powder, single phase of $Mg_{5}Nb_{4}O_{15}$ were appeared. The bulk density and quality factor of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) ceramics were increased with sinteming temperature in $1400^{\circ}C{\sim}1450^{\circ}C$, but these were decreased in another sintering temperature. Dielectric constant of the $Mg_{5}Ta_{4}O_{15}$ ceramics was increased continuously with increasing of sintering temperature. And the dielectric constant of the $Mg_{5}Nb_{4}O_{15}$ ceramics was increased in $1400^{\circ}C{\sim}1450^{\circ}C$ but decreased in $1475^{\circ}C$. In the case of the $Mg_{5}Ta_{4}O_{15}$ and $Mg_{5}Nb_{4}O_{15}$ ceramics sintered at $1450^{\circ}C$ for 5h, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 8.2, 259,473 GHz, -10.91 $ppm/^{\circ}C$ and 14, 37,350 GHz, -52.3 $ppm/^{\circ}C$, respectively.

• 한국수산과학회지
• /
• 제56권6호
• /
• pp.841-849
• /
• 2023

Corallina pilulifera (CP) is prevalent along the Korean coastline and belongs to the Corallinaceae family, exhibiting growth throughout all seasons. This study confirmed the role of calcium supplementation through CP, calcined CP (CCP), and a commercial calcium powder, highlighting variations in dosage within animal models induced by a calcium-deficient diet. Analysis of calcium absorption was conducted by assessing the serum and urine calcium levels during the feeding periods. Serum calcium content was significantly higher in the control group (CON, 9.79 mg/dL) than in the calcium-deficient model (CDM, 6.15 mg/dL). The calcium content of urine was significantly higher than that of CON (0.20 mg/dL) compared with CDM (0.08 mg/dL). Reticular bone thickness showed no significant differences between the CON and CDM groups. Additionally, micro-CT results demonstrated a reduction in the trabecular volume and a significant difference between the number of strands and the average interval of the reticular bone. In conclusion, CP serves as a promising source of calcium supplementation. Therefore, these findings emphasize that CP is of sufficient value as an industrial material related to calcium metabolism.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.432-440
• /
• 1996

본 연구는 졸-겔법을 이용하여 알칼리 조건인 pH 10에서 제조한 ZrO2의 하소온도에 따른 분말특성과 코발트 흡착량에 미치는 하소온도의 영향에 대하여 검토하였다. 졸-겔법을 이용하여 ZrO2 분말을 제조하고, 600, 800, 1000, 1200, 140$0^{\circ}C$로 하소한 후, X-선 회절법, SEM, BET 방법, Fourier transform 적외선(FT-IR), 열중량 및 열시차분석법(TG-DTA)등을 이용하여 특성을 분석하였다. 알칼리조건인 pH 10에서 제조한 ZrO2는 하소온도가 $600^{\circ}C$일때 고온수에서 코발트 흡착량이 가장 우수하였으며, 이때 $600^{\circ}C$로 하소한 ZrO2의 비표면적은 24.03m2/g이였으며 25$0^{\circ}C$의 고온수에서 코발트 흡착량은 0.16m-eq/g이였다.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.675-682
• /
• 1991

Among many problems that need to be solved in the process of preparing multilayer chip LC filters, we studied the control of shrinkage in order to prevent the crack, warpage, and/or delamination which occurs at the interface between the inductance (L part) and the capacitance (C part). Shrinkage was controlled by compositions, powder size, calcining temperature and amount of organic binder. Capacitance sheet was prepared by mixing 65 wt% binder with the composition of 96 wt% TiO2 having an average particle size of 0.5 $\mu\textrm{m}$, 3 wt% CuO. After small amount of MnO2 and SiO2 added, it was calcined at 750$^{\circ}C$ for 2 hr. Inductance sheet was prepared by mixing 60 wt% binder with the composition of 49.5% mol% Fe2O3, 20.5 mol% ZnO, 20 mol% NiO and 10 mol% CuO which was calcined at 775$^{\circ}C$ for 2 hr. These sheets was laminated at 250 kg/$\textrm{cm}^2$, and cofired at 900$^{\circ}C$ for 2 hr to give rise to a multilayer chip LC filter without any warpage.

• 한국세라믹학회지
• /
• 제50권5호
• /
• pp.348-352
• /
• 2013

The evaluation of plasma resistance and the characteristics of yttria ceramics fabricated by calcination yttria as a starting material without dopants under an oxidation atmosphere was investigated. Regardless of the starting materials, as-received, and calcined yttria powder, XRD patterns showed that all samples have $Y_2O_3$ phase. The three cycling process inhibited a large grain, which occurs frequently during the yttria sintering, and a high density ceramic with a homogeneous grain size was obtained. The grain size of the sintered ceramic was affected by the starting powders. The smaller the grain size, the larger were the Young's modulus and KIC. Compared to $Al_2O_3$ and $ZrO_2$ ceramics, yttria ceramics showed a 3 times larger plasma resistance and a 1.4~2.2 times lower weight loss during the plasma etching test, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 1997

In this paper, to obtain the YbB $a_2$C $u_3$ $O_{x}$ superconductor, the mixed Powders of Y $b_2$ $O_3$, BaC $O_3$, CuO and Y $b_2$BaCu $O_{5}$, BaCu $O_2$ were used and the various calcining conditions were applied for the 123 phase of YbB $a_2$C $u_3$ $O_{x}$. Samples were prepared by the mixed oxide method and calcined with various temperatures of 88$0^{\circ}C$ ~91$0^{\circ}C$ . It was observed that the distribution of YbB $a_2$C $u_3$ $O_{x}$ phase which was calcined at 90$0^{\circ}C$ for 12 hours and 99 hours. But the result of long time calcination(99 hrs), the 123 phase of YbB $a_2$C $u_3$ $O_{x}$ was existed between 89$0^{\circ}C$ and 91$0^{\circ}C$ . And the best case could be obtained at the calcination temp. of 90$0^{\circ}C$ from the mixed Powder of YbB $a_2$C $u_3$ $O_{5}$ and Bacu $O_2$ which were prepared individually.idually.

• 한국세라믹학회지
• /
• 제30권4호
• /
• pp.279-288
• /
• 1993

A study on calcination and reduction of AUC(ammonium uranyl carbonate, (NH4)4UO2(CO3)3) has been carried out by using TG-DTA in N2, air and H2 atmospheres, respectively. Phases of various intermediate obtained during thermal analysis of AUC in different atmospheres were confirmed by XRD. Powder characteristics of each intermediate were investigated by measuring particle size and specific surface area, and also observed by SEM. As a results, regardless of applied atmosphere AUC was calcined into amorphous UO3, which was converted to $\alpha$-U3O8 Via $\alpha$-UO3 in both H2 and N2 atmosphere, but directly into $\alpha$-UO3 in air atmosphere. Further reduction of U3O8 was only detectable in hydrogen atmosphere. During calcination and reduction, average particle size was reduced to less than 30% of original value without morphology change. Specific surface area was dramatically increased with release of NH3, CO2 and H2O from AUC powder and reached maximum value around 25$0^{\circ}C$, and then gradually decreased with the increase of temperature due to sintering effect of uranium oxides such as UO3 and U3O8. It was also found that the change of average crystallite size and pore size were closely related to the changes of specific surface area of uranium oxides.

• 한국분말재료학회지
• /
• 제9권3호
• /
• pp.167-173
• /
• 2002

A new approach to produce nanostructured WC/Co composite powders by a mechanochemical process was made to improve the mechanical properties of advanced hardmetals. Homogeneous spherical W-Co salt powders were made by spray drying of aqueous solution from ammonium metatungstate($(NH_4)_6(H_2W_{12}O_{40})\cdo4H_2O$,AMT) and cobalt nitrate hexahydrate (Co(NO$_3$)$_2$.6$H_2O$). spray dried W-Co salt powders were calcined for 1 hr at $700^{\circ}C$ in atmosphere of air. The oxide powder was mixed with carbon black by ball milling and this mixture was heated with various temperatures and times in $H_2$. The $WO_3/CoWO_4$ composite oxide powders were obtained by calcinations at $700^{\circ}C$. The primary particle size of W/Co composite oxide powders by SEM was 100 nm. The reduction/carburization time decreased with increasing temperatures and carbon additions. The average size of WC particle carburized at $800^{\circ}C$ by TEM was smaller than 50 nm.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1719-1723
• /
• 2009

The LiFeP$O_4$ powder was synthesized by using the solid state reaction method with Fe($C_2O_4){\cdot}2H_2O,\;(NH_4)_2HPO_4,\;Li_2CO_3$, and chitosan as a carbon precursor material for a cathode of a lithium-ion battery. The chitosan added LiFePO4 powder was calcined at 350 ${^{\circ}C}$ for 5 hours and then 800 ${^{\circ}C}$ for 12 hours for the calcination. Then we calcined again at 800 ${^{\circ}C}$ for 12 hours. We characterized the synthesized compounds via the crystallinity, the valence states of iron ions, and their shapes using TGA, XRD, SEM, TEM, and XPS. We found that the synthesized powders were carbon-coated using TEM images and the iron ion is substituted from 3+ to 2+ through XPS measurements. We observed voltage characteristics and initial charge-discharge characteristics according to the C rate in LiFeP$O_4$ batteries. The obtained initial specific capacity of the chitosan added LiFeP$O_4$ powder is 110 mAh/g, which is much larger than that of LiFeP$O_4$ only powder.