• 전기학회논문지
• /
• 제67권6호
• /
• pp.702-707
• /
• 2018

In case of Lighting occurs in Domestic combined distribution line, normally the voltage for the neutral line increase dramatically. General connection for underground cable is bundled common earth type so the lightning over voltage increase at the concentric-neutral line is not big enough to give impact on cable sheath. But in case of Non bundled common earth type it is necessary to analyze the phenomena on cable sheath caused by lightening overvoltage. Especially pole and cable joint are the core factor to consider. In this paper concrete pole and cable joint were evaluated in case of Non bundled common earth type combined distribution Line. EMTP simulation model has been designed and several case study were made. Also several experimental test were made to verify the simulation result.

• 한국지반공학회논문집
• /
• 제29권6호
• /
• pp.33-51
• /
• 2013

본 논문에서는 현재 개발 중인 쉴드터널의 강연선 체결 방식에 대해 소개하고 두 번에 걸친 실대형 세그먼트 체결시험 결과를 나타내었다. 실대형 세그먼트 체결시험을 통해 기존 볼트 체결 방식과 강선을 이용한 체결 방식을 비교하여 체결재로써의 강연선 적용 가능성에 대한 검토를 수행하고, 강연선 체결 방식 적용 시 세그먼트에 발생하는 체결력의 역학적 거동을 분석하였다. 연구를 통해 기존 세그먼트 체결장치와 비교하여 높은 체결력을 얻을 수 있으며, 터널 세그먼트 전체의 일체화 거동 및 구조적인 안정성 증가를 기대할 수 있음을 확인하였다. 또한, 볼트 체결 대비 강연선 체결 방식이 세그먼트 체결에 더 효과 적일 수 있으며, 강연선이 세그먼트 체결 장치로서의 적용성도 좋은 것으로 사료된다.

• Smart Structures and Systems
• /
• 제9권1호
• /
• pp.35-53
• /
• 2012

Mechanical dampers have been proved to be one of the most effective countermeasures for vibration mitigation of stay cables in various cable-stayed bridges over the world. However, for long stay cables, as the installation height of the damper is restricted due to the aesthetic concern, using passive dampers alone may not satisfy the control requirement of the stay cables. In this connection, semi-active MR dampers have been proposed for the vibration mitigation of long stay cables. Although various studies have been carried out on the implementation of MR dampers on stay cables, the optimal damping performance of the cable-MR damper system has yet to be evaluated. Therefore, this paper aims to investigate the effectiveness of MR damper as a semi-active control device for the vibration mitigation of stay cable. The mathematical model of the MR damper will first be established through a performance test. Then, an efficient semi-active control strategy will be derived, where the damping of MR damper will be tuned according to the dynamic characteristics of stay cable, in order to achieve optimal damping of cable-damper system. Simulation study will be carried out to verify the proposed semi-active control algorithm for suppressing the cable vibrations induced by different loading patterns using optimally tuned MR damper. Finally, the effectiveness of MR damper in mitigating multi modes of cable vibration will be examined theoretically.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.332-333
• /
• 2006

The properties of a cable Insulate capacity between surfaces with the variation of the interfacial breakdown, the addition of silicon oil, the variation of pressure and interfacial roughness were investigated. The Insulate trouble of a power cable is out of the interfacial parts, which breakdown the insulate breakdown capacity in a power cable. In this study, the analysis of electric field and the phenomenon of interfacial breakdown were reported by varying the surfaces condition of silicon rubber, XLPE used for connection materials of a power cable.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권10호
• /
• pp.489-492
• /
• 2001

The connection method of CCPU has been changed from connection between sheath and grounding to connection between sheaths without grounding since 1997. In domestic, there is so many cases that cables circuits were installed before 1997, added in same route after that, operated as multi-connecting systems of CCPU in same route. This paper examine the problem of multi-connecting system by EMTP simulation, and presents methods to improve the system characteristics.

• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.205-211
• /
• 2008

This paper describes the method aimed at establishing the equipment measuring the parameter of Cable Network by Best proper Cable Modem and PDA through RS232 interface. In this paper, we propose our creative experimental configuration and develope the Cable Modem (DOCSIS 2.0) superior more performing than the referred Cable Modem (DOCSIS 1.0, 1.1) and the measuring equipment of HFC network compositing of Cable Modem and PDA through RS232 interface. This equipment analyzes Upstream (U/S) and Downstream (D/S) Signal quality and generates the signal of Upstream by CW signal. The paper also provides the experimental results to check the Best Proper Cable Modem and the displayed screen for parameters for SNR, BER and the demodulated IQ diagram of 256QAM through LCD of PDA. Henceforth, it'll be possible to support a variety of the functions for E-mail, Internet, the speed test of WEB connection and the transmission of the measured result real time by PDA.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.207-214
• /
• 2011

높은 강도와 우수한 연성을 가지는 초고성능 콘크리트(Ultra High Performance Concrete, UHPC)는 교량 부재의 두께 및 자중을 감소시키는데 적합하여, 교량의 장대화, 장경간화에 유리한 재료로 각광 받고 있다. 그러나 초고성능 콘크리트는 타설 과정이 복잡하고 어렵기 때문에 현장 타설을 통한 적용이 어려운 재료이다. 따라서 이에 대한 대안으로 프리캐스트 공법을 활용하는 방안이 중점적으로 연구되고 있다. 본 연구에서는 이와 같은 연구의 일환으로 초고성능 콘크리트의 재료 특성을 고려하여 하이브리드 사장교 바닥판 접합부의 철근 이음방법에 따른 구조적 성능을 평가하였다. 바닥판의 접합부에 적용할 수 있는 철근 이음을 형상에 따라 RC 부재에 적용하고, 이에 대한 비선형 해석을 통해 구조적 성능을 예측하였다. 또한 600 m급 사장교를 선정하여 단면력 해석을 통해 접합부에서 발생하는 부착 응력의 크기를 파악하고, 이를 접합부 형상에 따른 부착 강도의 크기와 비교하여 구조적 성능을 평가하였다. 해석 결과, 접합부 철근의 형상에 따라 U형 루프 타입이 가장 큰 하중을 견딜 수 있고, 직선형 타입이 가장 큰 부착 강도를 발현하는 것으로 예측되었다. 또한, 세 가지 형상의 접합부 철근 모두 초고성능 콘크리트의 사장교의 완성계에서 요구되는 부착 성능을 만족시켰다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.344-345
• /
• 2011

A necessity to a superconducting cable in power transmission systems have been growing more and more due to high power density in urban areas and rapid increase of power demand. In view of these situation, it is a noteworthy fact that superconducting cable has remarkable advantages, such as lower power loss and 3-5 times higher power transmission capacity, compared with conventional power cable. For the last a few years, long-term reliability tests had been carried out in the KEPCO PT Center, and now it has been installed in KEPCO's real power grid for demonstrating commercial operation. This paper deals with the test results of dielectric properties performed at manufacturing factory for the joint box, termination and core of HTS cable system and whole system connected in real power grid.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.629-635
• /
• 2014

This paper describes propagation characteristics obtained by considering semiconducting screen and cross-bonding in underground transmission cables. The semiconducting screen of power cable has effect on propagation characteristics including attenuation, velocity and surge impedance. However, it is very difficult to apply the semiconduction screen for EMTP model because of the number of conductors limitation. Therefore, CIGRE WG 21-05 proposed advanced insulation structure and analysis technique of simplified approach including inner and outer semiconducting screen. In this paper, the various propagation characteristics analyse using this structure and technique for 154kV XLPE $2000mm^2$ cable. The frequency independent model of EMTP CABLE PARAMETER is used for just pattern analysis of propagation characteristics. For exact data analysis, the frequency dependent model of J-marti is used for EMTP modeling. From these result, various propagation characteristics of 154kV XLPE $2000mm^2$ cable according to semi conducting screen consideration, frequency range, cable length and pulse width are analysed. In addition, in this paper, the effects of cross-bonding are also variously discussed according to cross-bonding methods, direct connection and impedance of lead cable.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.1030-1050
• /
• 2021

The edges with "bridge characteristic" play the role of connecting the communication between regions in power optical cable network. To solve the problem of mining edges with "bridge characteristic" in provincial power optical cable network, the complex power optical cable network model is constructed. Firstly, to measure the generated potential energy of all nodes in n-level neighborhood local structure for one edge, the n-level neighborhood local structure topological potential is designed. And the minimum connected chain attenuation is designed to measure the attenuation degree caused by substituted edges. On the basis of that, the minimum connected chain attenuation topological potential based measurement is designed. By using the designed measurement, a bridge-edges mining algorithm is proposed to mine edges with "bridge characteristic". The experiments are conducted on the physical topology of the power optical cable network in Jilin Province. Compared with that of other three typical methods, the network efficiency and connectivity of the proposed method are decreased by 3.58% and 28.79% on average respectively. And the proposed method can not only mine optical cable connection with typical "bridge characteristic" but also can mine optical cables without obvious characteristics of city or voltage, but it have "bridge characteristic" in the topology structure.