• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.214-219
• /
• 2009

In high-efficiency crystalline silicon solar cells, If high-efficiency solar cells are to be commercialized. It is need to develop superior contact formation method and material that can be inexpensive and simple without degradation of the solar cells ability. For reason of plated metallic contact is not only high metallic purity but also inexpensive manufacture. It is available to apply mass production. Especially, Nickel, Copper and Silver are applied widely in various electronic manufactures as easily formation is available by plating. The metallic contact system of silicon solar cell must have several properties, such as low contact resistance, easy application and good adhesion. Ni is shown to be a suitable barrier to Cu diffusion as well as desirable contact metal to silicon. Nickel monosilicide(NiSi) has been suggested as a suitable silicide due to its lower resistivity, lower sintering temperature and lower layer stress than $TiSi_2$. Copper and Silver can be plated by electro & light-induced plating method. Light-induced plating makes use the photovoltaic effect of solar cell to deposite the metal on the front contact. The cell is immersed into the electrolytic plating bath and irradiated at the front side by light source, which leads to a current density in the front side grid. Electroless plated Ni/ Electro&light-induced plated Cu/ Light-induced plated Ag contact solar cells result in an energy conversion efficiency of 14.68 % on $0.2{\sim}0.6{\Omega}{\cdot}cm,\;20{\times}20mm^2$, CZ(Czochralski) wafer.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.17-25
• /
• 1997

The evoked potentials for concentrations of solutions of the four qualities of tastes(i.e., sweet, salty, sour, and bitter tastes) were measured. The solution was applied to the chorda tympani nerve located on the left side of the tongue at 20mm from the tip and 15mm left from the center line. The evoked potentials were detected from Cz referred to A1(left lobe) with the ground at the Fpz position. The Maximum potential level and its latency were evaluated. The individual threshold level of concentration of the solutions of four tastes were measured. Artificial saliva was used as a control solution. The evoked positive potentials for four qualities of tastes (i.e., gustatory evokde potentials) were found to be around 150ms by averaging eight responses. The arbitrary concentration of the solutions were presented by the relative concentration, which was the ratio of the arbitrary concentration to the individual threshold level. The characteristic relations between the latency and the relative concentration ;and those between the potential level and the relative concentration were evaluated. These evalutions showed that (1) the latencies for salty and bitter tastes denoted the minimum values due to for the change of relative concentration, and that (2) the latency for sour taste decreased as the relative concentrations increased, while the latency for sweet taste denoted the inverse tendency, Sinificant differences between any two maximum potential levels were not recognized. A response latencies to sucrose were abolished after treatment of tongue by a sweet-suppressing agent.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.775-780
• /
• 2016

Recently, photovoltaic industry needs a new design of Czochralski (Cz) process for higher productivity with reasonable energy consumption as well as solar cell's efficiency. If the process uses the large size reactor for increasing productivity, it is possible to produce a 12-inch, rather than the 8-inch. Also the continuous czochralski process method can be maximized to increase productivity. In this study, it was designed to improve the yield value of ingot with optimal condition which reduce consumption of electrical power. It has increased the productivity of the 12-inch ingot process condition by using CFD simulation. I have found optimal growth rate, by comparing each growth rate the interface shape, Temperature gradient, power consumption. As a result, the optimal process parameters of the growth furnace has been derived to improve for the productivity and to reduce energy. This study will contribute to the improvement of the productivity in the solar cell industry.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.9 no.1
• /
• pp.15-21
• /
• 2011

Purpose : This study aims to examine the effects of action observation of ski simulation on electroencephalogram (EEG). Methods : Thirty healthy subjects were randomly divided into three groups: 10 participants in an AM (actual movement) group; 10 participants in an OM (observation) group; and 10 participants in a CM (control movement) group. The EEG was measured to examine changes in EEG between action observation and actually movement at 8 areas of the scalp for one minute before, during and after action observation. Results : Relative alpha power showed statistically significant differences among groups in Cz and C4 and there were interactions among groups in the Oz area. Relative beta power showed no statistical significance among groups and in particular, there were interactions among groups in the Oz area. Conclusion : These findings show that action observation affected brain activation as in actual movement. Thus it can be expected that when movement through the brain activation is applied to patients in bed rest or those who cannot perform actually movement, it can be utilized as physiotherapy.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.228-231
• /
• 2015

Ultrasonic motors provide high torques and quick responses compared to their magnetic counterparts; therefore, they are widely used in small-scale applications such as mobile phones, microrobots, and auto-focusing modules in digital cameras. To determine the feasibility of lead-free piezoceramics for ultrasonic motor applications, we fabricated a ring-type piezoceramic with a KNN-based lead-free piezoceramic (referred to as CZ5), intended for use in an auto-focusing module of a digital camera. The vibration of the lead-free stator was observed at 45.1 kHz. It is noteworthy that the fully assembled lead-free ultrasonic motor exhibited a revolution speed of 5-7 rpm, even though impedance matching with neighboring components was not considered. This result suggests that the tested KNN-based piezoceramic has great potential for use in ultrasonic motor applications, requiring minimal modifications to existing lead-based systems.

• The Plant Pathology Journal
• /
• v.19 no.3
• /
• pp.129-132
• /
• 2003

Fusarium wilt of cucumber caused by Fusarium oxy-sporum f. sp. cucumerinum is a serious vascular disease worldwide. Biological control of Fusarium wilt in several crops has been accomplished by introducing non-pathogenic Fusarium sup. and other biocontrol agents in soil or in infection courts. In this study, quantitative models were used to determine the biocontrol efficacy of inundatively applied antagonist formulations and the length of their effectiveness in controlling Fusarium wilt of cucumber. Quantitative model of the form [Y=L (1${-exp}^{-kx}$)] best described the relationship between disease incidence (Y, %) and inoculum density (X) of isolates F51 and F55. Isolate F51 was selected as a more virulent isolate based on the extent of its effectiveness in causing the wilt disease. The degree of disease control (Xi/X) obtained with the density of the biocontrol agent (Z), was described by the model [Xi/X=A (1${-exp}^{-cz}$)]. The zeolite-based antagonist formulation amended with chitosan (ZAC) was better at lower rates of application and peaked at around 5 g/ kg of the potting medium, whereas the peat-based antagonist formulation (PA) peaked at around 10 g/kg of the potting medium. ZAC formulation provided significantly better suppression of Fusarium wilt as described by the curvilinear relationship of the type Y= a+bX+c$X^2$, where Y represents percent disease incidence and X represents sustaining effect of the biocontrol agent.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.4
• /
• pp.322-328
• /
• 2009

Three-hundred and sixteen Escherichia coli strains from seawater, and a variety of farmed fishes, including oliver flounder (Paralichthys olivaceus), black rock fish (Sebastes schlegeli), red sea bream (Pagrus major) and sea bass (Lateolabrax japonicus) between May to October in 2004, were tested by agar dilution method to determine their susceptibility patterns to 17 antimicrobial agents. Overall, 92.1% of Escherichia coli isolates from samples showed antimicrobial resistance to at least one antimicrobial agent and the multiple resistance was seen in 173 isolates (54.7%). The resistance of E. coli isolates to tetracycline (74.1%) was highest, followed by cephalothin (69.9%), doxycycline (66.5%), streptomycin (47.2%), ampicillin (46.2%), cefazolin (31.6%), enrofloxacin (31.0%). norfloxacin (28.2%). The most frequent resistance pattern was TE-D-CF-CIP-ENO-NOR-AM-S-C-SXT-AmC-CZ (14.7%), followed by CF (6.2%), TE (5.1%), TE-CF (4.5%) in 177 isolates from fishes and TE-D-CF (7.2%) followed by TE-D-CF-S (5.8%), CF and TE-D-S (3.6%) in 139 isolates from seawater.

• The Journal of Korean Physical Therapy
• /
• v.24 no.2
• /
• pp.127-133
• /
• 2012

Purpose: This study aims to examine the power changes in eletrocenphalogram (EEG) detected from the tibialis anterior muscle, during repetitive contraction exercise in normal female adults. Methods: The subjects of this study were 24 normal adult females, with no musculoskeletal or nervous system disorders. The 24 female subjects were divided into two groups: 12 subjects comprised a voluntary stimulation training group, and the other 12 subjects comprised an electrical stimulation training group. A total of thirty contractions were made repetitively by each woman, with maximal voluntary contraction exercise for six seconds, and a resting time of three seconds. During the experiment, their EEG was measured at eight positions. The eight positions were Fpz, Fz, Cz, CPz, C3, C4, P3, and P4, in accordance with the international 10~20 system. Results: The relative alpha power and beta power showed no statistically significant differences between the two groups. But the relative gamma power of the CPz, C3, C4, P3, and P4 areas showed statistically significant differences between the two groups (p<0.05). The relative theta power of the C4 area showed statistically significant differences between the two groups (p<0.05). Conclusion: Our findings show that tibialis anterior muscle contraction by electrical stimulation and by voluntary repeated contraction differentially affected brain activation. In particular, the CPz, C3, C4, P3 positions of relative gamma power showed brain activation in voluntary contraction. The C4 position of relative theta power showed different brain activation between the two groups.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.2
• /
• pp.281-287
• /
• 2013

PURPOSE: The study was designed to investigate the effects of visual, auditory, and visuoauditory cues on simple Serial Task Performance in heaithy adults. METHODS: Sixty-three right-handed heaithy adults without history of neurological dysfunction were participated. A modified version of the Serial Reaction Time Task (SRTT) using five blocks of perceptual motor sequences was administered. The blocked paradigm consisted of the five blocks with randomly repeated 8 digit sequences with 5 repetition. Three types of sensory cue were employed: visual cue, auditory cue and visuoauditory cue. All subjects were assigned to press the matched botton as quickly and accurately as possible, when one of 8 stimulations was presented(one, two, three, four, five, six, seven, eight). The reaction time, accuracy, and P300 latency were measured during serial task performance. The mean reaction time(ms), accuracy(%), and P300 latency(ms) were compared between three types of cue using ANOVA. RESULTS: The reaction time to auditory cue was significantly longer than visual and visuoauditory cues(p<.001). And accuracy to auditory cue was significantly lower than visual and visuoauditory cues(p<.001). All P300 latency(at Fz, Cz, Pz) were significantly longer than to visual and visuoauditory cues(p<.05). CONCLUSION: It is suggested that type of cues influence in choice reaction. These data may helpful in designing not only effective motor learning training programs for healthy persons but also reeducation programs for patients with neurological dysfunction.