DOI QR코드

DOI QR Code

Ring-Type Rotary Ultrasonic Motor Using Lead-free Ceramics

  • Hong, Chang-Hyo (School of Materials Science and Engineering, Ulsan National Institute of Science and Technology) ;
  • Han, Hyoung-Su (School of Materials Science and Engineering, Ulsan National Institute of Science and Technology) ;
  • Lee, Jae-Shin (School of Materials Science and Engineering, University of Ulsan) ;
  • Wang, Ke (State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University) ;
  • Yao, Fang-Zhou (State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University) ;
  • Li, Jing-Feng (State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University) ;
  • Gwon, Jung-Ho (HanaUtech) ;
  • Quyet, Nguyen Van (HanaUtech) ;
  • Jung, Jin-Kyung (School of Materials Science and Engineering, University of Ulsan) ;
  • Jo, Wook (School of Materials Science and Engineering, Ulsan National Institute of Science and Technology)
  • Received : 2015.07.14
  • Accepted : 2015.07.20
  • Published : 2015.07.31

Abstract

Ultrasonic motors provide high torques and quick responses compared to their magnetic counterparts; therefore, they are widely used in small-scale applications such as mobile phones, microrobots, and auto-focusing modules in digital cameras. To determine the feasibility of lead-free piezoceramics for ultrasonic motor applications, we fabricated a ring-type piezoceramic with a KNN-based lead-free piezoceramic (referred to as CZ5), intended for use in an auto-focusing module of a digital camera. The vibration of the lead-free stator was observed at 45.1 kHz. It is noteworthy that the fully assembled lead-free ultrasonic motor exhibited a revolution speed of 5-7 rpm, even though impedance matching with neighboring components was not considered. This result suggests that the tested KNN-based piezoceramic has great potential for use in ultrasonic motor applications, requiring minimal modifications to existing lead-based systems.

Keywords

References

  1. J. Rodel, W. Jo, K. T. Seifert, E. M. Anton, T. Granzow, and D. Damjanovic, "Perspective on the development of leadfree piezoceramics", J. Am. Cer. Soc., Vol. 92, pp. 1153-1177, 2009. https://doi.org/10.1111/j.1551-2916.2009.03061.x
  2. T. Takenaka and H. Nagata, "Current status and prospects of lead-free piezoelectric ceramics", J. Eur. Cer. Soc., Vol. 25, pp. 2693-2700, 2005. https://doi.org/10.1016/j.jeurceramsoc.2005.03.125
  3. P. Panda, "Review: Environmental friendly lead-free piezoelectric materials", J. Mater. Sci., Vol. 44, pp. 5049-5062, 2009. https://doi.org/10.1007/s10853-009-3643-0
  4. W. Jo, R. Dittmer, M. Acosta, J. Zang, C. Groh, E. Sapper, K. Wang, and J. Rodel, "Giant electric-field-induced strains in lead-free ceramics for actuator applications - status and perspective", J. Electroceram., Vol. 29, pp. 71-93, 2012. https://doi.org/10.1007/s10832-012-9742-3
  5. J. Rodel, K. G. Webber, R. Dittmer, W. Jo, M. Kimura, and D. Damjanovic, "Transferring lead-free piezoelectric ceramics into application", J. Eur. Cer. Soc., Vol. 35, pp. 1659-1681, 2015. https://doi.org/10.1016/j.jeurceramsoc.2014.12.013
  6. J.-F. Li, K. Wang, F.-Y. Zhu, L.-Q. Cheng, F.-Z. Yao, and D. J. Green, "(K,Na)$NbO_3$-based lead-free piezoceramics: fundamental aspects, processing technologies, and remaining challenges", J. Am. Cer. Soc., Vol. 96, pp. 3677-3696, 2013. https://doi.org/10.1111/jace.12715
  7. J. Wu, D. Xiao, and J. Zhu, "Potassium-sodium niobate lead-free piezoelectric materials: Past, present, and future of phase boundaries", Chem Rev, Vol. 115, pp. 2559-2595, 2015. https://doi.org/10.1021/cr5006809
  8. W. Liu and X. Ren, "Large Piezoelectric effect in Pb-free ceramics", Phys. Rev. Lett., Vol. 103, 2009.
  9. K. Wang, F.-Z. Yao, W. Jo, D. Gobeljic, V. V. Shvartsman, D. C. Lupascu, J.-F. Li, and J. Rodel, "Temperature-insensitive (K,Na)$NbO_3$-based lead-free piezoactuator seramics", Adv. Funct. Mater., Vol. 23, pp. 4079-4086, 2013. https://doi.org/10.1002/adfm.201203754
  10. F.-Z. Yao, J. Glaum, K. Wang, W. Jo, J. Rodel, and J.-F. Li, "Fatigue-free unipolar strain behavior in $CaZrO_3$ and $MnO_2$co-modified (K,Na)$NbO_3$-based lead-free piezoceramics", Appl. Phy. Lett., Vol. 103, pp. 192907, 2013. https://doi.org/10.1063/1.4829150
  11. F.-Z. Yao, K. Wang, and J.-F. Li, "Comprehensive investigation of elastic and electrical properties of Li/Ta-modified (K,Na) $NbO_3$ lead-freepiezoceramics", J. App. Phys., Vol. 113, pp. 174105, 2013. https://doi.org/10.1063/1.4803711

Cited by

  1. Sintering of Lead-Free Piezoelectric Sodium Potassium Niobate Ceramics vol.8, pp.12, 2015, https://doi.org/10.3390/ma8125449
  2. Lead-free piezoceramics – Where to move on? vol.2, pp.1, 2016, https://doi.org/10.1016/j.jmat.2015.12.002
  3. Tailoring Low-field Strain Properties of [0.97Bi1/2(Na0.78K0.22)1/2TiO3-0.03LaFeO3]-Bi1/2(Na0.82K0.18)1/2TiO3Lead-Free Relaxor/Ferroelectric Composites vol.29, pp.6, 2016, https://doi.org/10.4313/JKEM.2016.29.6.342
  4. Hardening behavior and highly enhanced mechanical quality factor in (K 0.5 Na 0.5 )NbO 3 –based ceramics vol.37, pp.5, 2017, https://doi.org/10.1016/j.jeurceramsoc.2017.01.013
  5. Applications of lead-free piezoelectric materials vol.43, pp.08, 2018, https://doi.org/10.1557/mrs.2018.180