• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.44-44
• /
• 2009

Recently, transparent ZnO-based TFTs have attracted much attention for flexible displays because they can be fabricated on plastic substrates at low temperature. We report the fabrication and characteristics of ZnO channel layers(ZnO TFTs) having different channel thicknesses. The ZnO film were deposited as active channel layers on $Si_3N_4/Ti/SiO_2p$-Si substrates by rf magnetron sputtering at $100\;^{\circ}C$ without additional annealing. Also the Zno thin films deposited at oxygen partial pressures of 40%. ZnO TFTs using a bottom-gate configuration were investigated. The $Si_3N_4$ film were deposited as gate insulator by PE-CVD at $15\;^{\circ}C$. All Processes were processed below $150^{\circ}C$ which is optimal temperature for flexible display and were used dry etching method.

• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.246-249
• /
• 2013

Graphene was obtained on Cu foil by thermal decomposition method. A gas mixture of $H_2$ and $CH_4$ and an ambient annealing temperature of $1,000^{\circ}C$ were used during the deposition for 30 Min., and for the transfer onto $SiO_2/Si$ and Si substrates. The physical properties of graphene were investigated with regard to the effect ofnitrogen atom doping and the various substrates used. The G/2D ratio decreased when the graphene became monolayer graphene. The graphene grown on $SiO_2/Si$ substrate showed a low intensity of the G/2D ratio, because the polarity of the $SiO_2$ layer improved the quality of graphene. The intensity of the G/2D ratio of graphene doped with nitrogen atoms increased with the doping time. The quality of graphene depended on the concentration of the nitrogen doping and chemical properties of substrates. High-quality monolayer graphene was obtained with a low G/2D ratio. The increase in the intensity of the G/2D ratios corresponded to a blue shift in the 2D peaks.

• 한국진공학회지
• /
• 제8권3B호
• /
• pp.346-352
• /
• 1999

Diamond-like carbon (DLC) lims were deposited by using end hall type ion gun. Benzene gas was used for the generation of carbon ions. In order to systematically control the ion energy, we applied to the substrate DC, pulsed DC or 250 kHz medium frequency bias voltage, DLC films of superior mechanical properties of hardness 39$\pm$4 GPa and elastic mudulus 290$\pm$50GPa (2 to 6 times better than those of the films deposited by plasma assisted CVD method) could be obtained. Deposition rate was much higher than when using Kaufman type ion source, which results from higher ion beam current of end hall type ion gun. The mechanical properties and atomic bond structure were independent of the bias voltage type ion gun. The mechanical properties and atomic bond structure were independent of the bias voltage type but intimately related with the magnitude of the bias voltage. With increasing the negative bias voltage, the structure of the films changed to graphitic one resulting in decreased content of three dimensional inter-links. Degradation of the mechanical properties with increasing bias voltage could be thus understood in terms of the content odf three dimensional inter-links.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.458-463
• /
• 2002

Carbon nanotubes were synthesized at various conditions using Ni-catalytic thermal chemical vapor deposition method and their characteristic properties were investigated by SEM, TEM and Raman spectroscopy. Carbon nanotubes were formed on very fine Ni-catalytic particles. The carbon nanotubes synthesized by thermal decomposition of acetylene at $700^{\circ}C$ had a coiled shape, while those synthesized at $850^{\circ}C$ showed a curved and Y-shape having a bamboo-like morphology. It was found that the carbon nanotube was also made on the fine Ni-catalytic particles formed on the surface of 100~400nm sized large ones after pretreatment with $NH_3$.ber composites show the high dielectric constant and large conduction loss which is increased with anisotropy of fiber arrangement. It is, therefore, proposed that the glass and carbon fiber composites can be used as the impedance transformer (surface layer) and microwave reflector, respectively. By inserting the foam core or honeycomb core (which can be treated as an air layer) between glass and carbon fiber composites, microwave absorption above 10 dB (90% absorbance) in 4-12 GHz can be obtained. The proposed fiber composites laminates with sandwitch structure have high potential as lightweight and high strength microwave absorbers.

• 한국재료학회지
• /
• 제14권11호
• /
• pp.807-812
• /
• 2004

The uniformity of emission mage and field emission properties of carbon nanotube(CNT) cathodes dependence on CNT particle dispersion were investigated for field emission displays. We used multi-walled carbon nanotubes (MWNTs) synthesized by CVD method as the field emitter materials. CNT dispersion in CNT ink was carried out by ultrasonication and shaking methods. According to CNT dispersion conditions, the uniformity of emission image and field emission properties of CNT cathodes were greatly affected. The smaller particles of filler materials and CNT powders provide the better properties of the CNT cathodes.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.697-702
• /
• 2001

열화학 기상 증착법을 이용하여 암모니아 처리에 따른 촉매 금속의 표면형태와 탄소 나노튜브의 성장을 조사하였다. 암모니아 처리의 열화학 과정의 조절에 의해 고르게 분산된 수직 성장된 탄소 나노튜브를 얻었다. 탄소 나노튜브 합성시 암모니아처리는 수직성장 및 고밀도 성장에 중요한 과정으로 그 역할에 대해 알아보았다. 고밀도의 수직 배향된 탄소나노튜브의 구조와 형태는 주사전자 현미경과 투과전자 현미경, 라만을 이용하여 관찰하였다.

• 한국결정성장학회지
• /
• 제4권3호
• /
• pp.262-275
• /
• 1994

SiC/C계 경사기능재료를 화학기상증착법에 의하여 흑연기판위에 증착시키고자 하였다. 본 실험에서 경사기능재료의 최적증착조착조건은 온도 $1300^{\circ}C, H_2/[SiCl_4+CH_4]=10, CH_4/[$SiCl_4+CH_4]=0.5-0.6$이었다. 불연속적인 입력개시비의 변화에도 불구하고 연속적으로 조성이 변화된 경사기능재료를 얻을 수 있었으며, 명확한 계면이 존재하지 않는 연속적인 구조변화가 주사전자현미경 관찰로 확인되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.113-119
• /
• 2005

4H-SiC planar MESFETs were fabricated using ion-implantation on semi-insulating substrate without recess gate etching. A modified RCA method was used to clean the substrate before each procedure. A thin, thermal oxide layer was grown to passivate the surface and then a thick field oxide was deposited by CVD. The fabricated MESFET showed good contact properties and DC/RF performances. The maximum oscillation frequency of 34 GHz and the cut-off frequency of 9.3 GHz were obtained. The power gain was 10.1 dB and the output power of 1.4 W was obtained for 1 mm-gate length device at 2 GHz. The fabricated MESFETs showed the charge trapping-free characteristics and were characterized by the extracted small-signal equivalent circuit parameters.

• 성인간호학회지
• /
• 제18권3호
• /
• pp.436-445
• /
• 2006

Purpose: The purpose of this study was to examine the effect of the discharge education program on compliance with the sick role behavior for patients having undergone cerebrovascular surgery. Method: Research was done using a posttest only design. The subjects were 60 patients who were admitted to the neurosurgery unit at C.N.U. Hospital in G. City and were divided into the experimental and control groups. The discharge education program were intervened two times in the experimental group by the researcher; the first one was at the time of discharge using a booklet about knowledge related to disease and compliance, and the other one was a telephone education session after a week from discharge. Data were collected two times by interview and telephone using questionnaires from January 19, to June 10, 2000. The first one was at hospital before discharge, and the other one was one month later from discharge. Data were analysed by $\chi^{2}$, t-test, ANOVA, and Pearson's correlation. Results: The experimental group showed a higher score of compliance(t=2.772, p=.008) than those of the control group, but knowledge about CVD was not significant between the two groups(p>.05). Conclusion: The discharge education program was effective on the compliance of the patients having undergone cerebrovascular surgery.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2431-2437
• /
• 2014

In this study, Ni, Ni-Cu and Ni/Cu catalysts were deposited onto C-fiber textiles via the electrophoretic deposition method, and the growth characteristics of carbon nanofibers on the deposited catalyst/C-fiber textiles were investigated. The catalyst deposition onto C-fiber textiles was accomplished by immersing the C-fiber textiles into Ni or Ni-Cu mixed solutions, producing the substrate by post-deposition of Ni onto C-fiber textiles with pre-deposited Cu, and passing it through a gas mixture of $N_2$, $H_2$ and $C_2H_4$ at $700^{\circ}C$ to synthesize carbon nanofibers. For analysis of the characteristics of the synthesized carbon nanofibers and the deposition pattern of catalysts, SEM, EDS, BET, XRD, Raman and XPS analysis were conducted. It was found that the amount of catalyst deposited and the ratio of Ni deposition in the Ni-Cu mixed solution increased with an increasing voltage for electrophoretic deposition. In the case of post-deposition of Ni catalyst onto substrates with pre-deposited Cu, both bimetallic catalyst and carbon nanofibers with a high level of crystallizability were produced. Carbon nanofibers yielded with the catalyst prepared in Ni and Ni-Cu mixed solutions showed a Y-shaped morphology.