• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.14-20
• /
• 2007

This paper presents quaternary D flip-flop with advanced performance. Quaternary D flip-flop is composed of the components such as thermometer code output circuit, EX-OR gate, bias inverter, transmission gate and binary D flip-flop circuit. The designed circuit is simulated by HSPICE in $0.35{\mu}m$ one-poly six-metal CMOS process parameters with a single +3.3V supply voltage. In the simulations, sampling frequencies is measured around 100MHz. The PDP parameters and FOM we estimated to be 59.3fJ, 33.7 respectively.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.917-924
• /
• 2019

The passive scattering system nozzle of the proton therapy accelerator was simulated to evaluate the neutrons generated by each component in each nozzle by energy. The Monte Carlo N-Particle code was used to implement spread out Bragg peak with proton energy 220 MeV, reach 20 cm, and 6 cm length used in the treatment environment. Among the proton accelerator components, neutrons were the highest in scatterers, and the neutron flux decreased as it moved away from the central flux of the proton. This study can be used as a basic data for the evaluation of the radiation necessary for the maintenance and dismantling of proton accelerators.

• The Journal of Natural Sciences
• /
• v.16 no.1
• /
• pp.31-37
• /
• 2005

We have developed an algorithm to determine the position from the image points in a lensmeter with 6-sided prism lens. The positions of the image points which are formed by six prisms depends on the decenter position of a test lens and can be calculated by skew ray tracing. The optical characteristics of the lens meter was analyzed using the Code V program and the positions of the image points was expressed as a function of the decenter position of the test lens. By minimizing the expectation error, we can determine the decenter position position of a test lens from the image positions.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.535-544
• /
• 2003

The sensitivity analysis of a middle wave infrared optical system with 20: 1 zoom ratio is performed to analyze manufacturing and alignment tolerances, and to establish the alignment logic and the focus control strategy. The characteristics of the sensitivities of Zernike coefficients are investigated to all mechanical displacements and several zoom positions using Code-V Macro. From this result, the tolerances of manufacturing and alignment of the optical system are derived and the effective alignment logic is established. Futhermore, an effective focus control strategy is established to make the system simple and compact.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.647-653
• /
• 2020

Stainless steel is used commonly in nuclear applications for shielding radiation, so in this study, three different types of new stainless steel samples were designed and developed. New stainless steel compound ratios were determined by using Monte Carlo Simulation program Geant 4 code. In the sample production, iron (Fe), nickel (Ni), chromium (Cr), silicium (Si), sulphur (S), carbon (C), molybdenum (Mo), manganese (Mn), wolfram (W), rhenium (Re), titanium (Ti) and vanadium (V), powder materials were used with powder metallurgy method. Total macroscopic cross sections, mean free path and transmission number were calculated for the fast neutron radiation shielding by using (Geant 4) code. In addition to neutron shielding, the gamma absorption parameters such as mass attenuation coefficients (MACs) and half value layer (HVL) were calculated using Win-XCOM software. Sulfuric acid abrasion and compressive strength tests were carried out and all samples showed good resistance to acid wear and pressure force. The neutron equivalent dose was measured using an average 4.5 MeV energy fast neutron source. Results were compared to 316LN type stainless steel, which commonly used in shielding radiation. New stainless steel samples were found to absorb neutron better than 316LN stainless steel at both low and high temperatures.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1355-1366
• /
• 2020

A review of the documentation and an interpretation of the NEA-1517/74 and NEA-1517/80 shielding benchmarks (measurements of photon leakage flux from a hollow sphere with a central 14 MeV neutron source) from the SINBAD database with the Monte Carlo code MCS and the most up-to-date ENDF/B-VIII.0 neutron data library are conducted. The two analyzed benchmarks describe satisfactorily the energy resolution of the photon detector and the geometry of the spherical samples with inner beam tube, tritium target and cooling water circuit, but lack information regarding the detector geometry and the distances of shields and collimators relatively to the neutron source and the detector. Calculations are therefore conducted for a sphere model only. A preliminary verification of MCS neutron-photon calculations against MCNP6.2 is first conducted, then the impact of modelling the inner beam tube, tritium target and cooling water circuit is assessed. Finally, a comparison of calculated results with the libraries ENDF/B-VII.1 and ENDF/B-VIII.0 against the measurements is conducted and shows reasonable agreement. The MCS and MCNP inputs used for the interpretation are available as supplementary material of this article.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.6
• /
• pp.722-726
• /
• 2010

The recent deployment of RIA (Rich Internet Application) is often involved with the complex JavaScript code, which leads to the announcement of high performance JavaScript engines for its efficient execution. And the Sunspider benchmark is being widely used for the performance evaluation of these JavaScript engines. In this paper, we compare the execution methods of three high-performance JavaScript engines, Mozilla TraceMonkey, Google V8, and Apple SquirrelFish Extreme, and measure their performances using the SunSpider benchmark. We also evaluate the pros and cons of each engine, based on its execution method and the code characteristics of the SunSpider benchmarks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1588-1596
• /
• 1999

This paper describes a signaling processor IC for land mobile radio systems. This IC generates CTSS tone or DCS code signals for signaling between the land mobile radio systems and decodes them to open the audio path. The CTSS tone or DCS code signals occupy the subaudio band and are transmitted with voice signal. The audio and subaudio paths consist of switched capacitor filters. The IC has been implemented in 0.6-$\mu\textrm{m}$ 2-poly 3-metal CMOS process. The chip size is 3 mm$\times$4.3 mm and total current is about 3.4 ㎃ at 3.3 V.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.281-288
• /
• 2001

In this study we carried out athermalization analysis and tests to meet the required optical performance for thennal imaging systems even if the systems were operating over a wide temperature range. By using optical design programs such as Code- V and SIGMA2100, the simulation for athermalization was done with FPA thermal imaging system. In the athermalization test putting the thermal imaging system and collimator into a temperature chamber, the images depending on the temperature were recorded on video tape. In particular, the zoom thermal imaging system with two dimensional array detector was tested to check the result of the athermalization simulation. As a result, it was proved to meet the required optical performance for the thermal imaging system within $-32-+50^{\circ}C$ temperature range. range.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.2
• /
• pp.40-46
• /
• 2020

Modern traffic accidents are a complex occurrence. Various indicators are needed to analyze traffic accidents. Countries that have been investigating traffic accidents for a long time accumulate various data to analyze traffic accidents. The Korean In-Depth Accident Study (KIDAS) database collected damaged vehicles and severity of injury caused by Collision Deformation Classification code (CDC code), Abbreviated Injury Scale (AIS), and Injury Severity Score (ISS). As a result of the investigation, data relating to the injuries of the occupants can be easily obtained, but it was difficult to analyze human severity based on the information of the damaged vehicle. This study suggests a method to measure the speed change at the time of an accident, which is one of the most important indicators in the vehicle crash database, to help advance KIDAS research.