• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.260-264
• /
• 2014

We developed a novel double dopant bismuth oxide system with Tb and W. When Tb was doped as a single dopant, a Tb dopant concentration more than 20 mol% was required to stabilize bismuth oxides with a high conductivity cubic structure. High temperature XRD analysis of 25 mol% Tb-doped bismuth oxide (25TSB) confirmed that the cubic structure of 25TSB was retained from room temperature to $700^{\circ}C$ with increase in the lattice parameter. On the other hand, we achieved the stabilization of high temperature cubic phase with a total dopant concentration as low as ~12 mol% with 8 mol% Tb and 4 mol% W double dopants (8T4WSB). Moreover, the measured ionic conductivity of 10T5WSB was much higher than 25TSB, thus demonstrating the feasibility of the double dopant strategy to develop stabilized bismuth oxide systems with higher oxygen ion conductivity for the application of SOFC electrolytes at reduced temperature. In addition, we investigated the long-term stability of TSB and TWSB electrolytes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.840-844
• /
• 2003

The main objective of this investigation is to improve the photoluminescent of $Zn_{2}SiO_{4}:Mn$ phosphors prepared by the sol-gel technique. We try to use adding a new co-dopan such as Cr and Ti. The calcination temperature of sol-gel technique(1100 $^{\circ}C$) was lower than that of the solid state reaction (1300 $^{\circ}C$). Under 147nm excitation, the maximum emission intensity was obtained when the concentration of Cr and Ti was 0.1mol% with respect to $Zn_{2}SiO_{4}:Mn$. In order to study the effect of co-dopant, the content of Mn and the ratio of water to TEOS were fixed at 2mol% and 36:1, respectively.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.637-643
• /
• 2003

In order to improve the photoluminescent properties and crystallinity, Zn$_2$SiO$_4$:Mn, M(M=Cr, Ti) phosphors were synthesized by the sol-gel method. The willemite single phase was obtained at 110$0^{\circ}C$, which is lower temperature than that of the conventional solid-state reaction (130$0^{\circ}C$). The characteristics of fired samples were obtained by a 147 nm excitation source under VUV (Vacuum Ultraviolet). To investigation the effect of co-dopant, the content of Mn and the ratio of $H_2O$ to TEOS was fixed as 2 ㏖% and 36. 1, respectively. The highest emission intensity was obtained when the concentration of Cr and Ti was 0.1 ㏖% relative to Zn$_2$SiO$_4$:Mn. While the emission intensity decrease continuously the decay time improved as increased the Cr concentration. In the case of Ti added samples, however, the emission intensity increase up to 2 ㏖％ concentration.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.81-85
• /
• 2010

The effects of co-doping with complex dopants of softeners, $La^{+3}$ and/or $Nb^{+5}$, and a hardener, $Fe^{+3}$, on the microstructural and piezoelectric properties of PZT ceramics with a composition of a rhombohedral-tetragonal morphotropic phase boundary, $PbZr_{0.53}Ti_{0.47}O_3$, were investigated. Unlike single-element doping, the complex doping of both the softener and hardener ions led to various compensation effects for the piezoelectric properties of the PZT ceramics. For 0.5 wt.% $La_2O_3$ softener and/or 0.5 wt.% $Nb_2O_5$ doped compositions, there were apparent hardener doping (compensation) effects for an addition of over 1.0 wt.% $Fe_2O_3$. For the $La_2O_3$ and/or $Nb_2O_5$ doped composition, the co-dopant $Fe_2O_3$ addition led to lower kp and $\varepsilon$r, and increased $Q_m$ values. The prepared PZT ceramics modified with complex soft dopants, $La^{+3}$ and $Nb^+$, as well as a hard dopant, $Fe^{+3}$, showed that the piezoelectric properties were stable with the compositional variations, which made it possible to establish piezoelectric performances with higher reliability and reproducibility. The most improved piezoelectric properties of enhanced $Q_m$ with $\varepsilon_r$ remaining higher $k_p$, were obtained in the PZT composition complexly doped with $La^{+3}$ and $Fe^{+3}$. From the results obtained in this study, the properties of compositionally modified PZT ceramics can also be tailored over a wider range by changing the dopant compositions to meet the specific requirements for underwater or other applications.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.644-651
• /
• 2003

Effects of additives on electrical properties and microstructure of MLCC X7R dielectrics have been investigated. The additives of glass frit or oxide form were added in the same main composition by the different powder processing conditions. As a result of the dielectric property and microstructure analysis, the composition having the glass layer with dopant concentration gradient showed the excellent dielectric properties. The MLCCs were fabricated with the excellent composition and all dielectric properties satisfied the X7R requirements.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.579-583
• /
• 1998

Silicide layer structures, agglomeration of silicide layers, and dopant redistributions for the Co/Ti bilayer sputter-deposited on the P-doped polycrystalline Si substrate and subjected to rapid thermal annealing were investigated and compared with those on the single Si substrate. The $CoSi_2$ phase transition temperature is higher and agglomeration of the silicide layer occurs more severely for the Co/Ti bilayer on the doped polycrystalline Si substrate than on the single Si substrate. Also, dopant loss by outdiffusion is much more significant on the doped polycrystalline Si substrate than on the single Si substrate. All of these differences are attributed to the grain boundary diffusion and heavier doping concentration in the polycrystalline Si. The layer structure after silicidation annealing of Co/ Tildoped - polycrystalline Si is polycrystalline CoSi,/polycrystalline Si, while that of Co/TiI( 100) Si is Co- Ti- Si/epi- CoSi,/(lOO) Si.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.108-108
• /
• 2002

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1072-1075
• /
• 2004

Ion shower doping using a source gas of $PH_3/H_2$ was conducted on excimer-laser-annealed (ELA) Poly-Si. As-implanted damage is accumulated more and more with the increase of an acceleration voltage and a doping time. In this study we found that dopant-activation is relatively a rapid kinetic-process while damage-recovery is not.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.337-342
• /
• 2001

PDP(Plasma Display Panel)용 녹색 형광체인 Zn$_2$SiO$_4$:Mn에 채-dopant로 Al을 첨가하여 졸-겔법으로 합성하였다. 졸-겔법으로 제조한 형광체는 기존의 고상 반응에 의해 합성된 경우보다 낮은 온도(1000-110$0^{\circ}C$)에서 Zn$_2$SiO$_4$단일상을 형성하였으며, 300-500nm의 비교적 균일한 입자를 얻을 수 있었다. 또한, co-dopant인 Al을 첨가함으로써 발광휘도를 향상시키고, 전광시간을 줄일 수 있었다. 한편, TEOS의 가수분해시 $H_2O$/TEOS 비율을 조절하여 발광의 최적 조건을 조사하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.149-152
• /
• 2003

Soruce/drain (or, LDD) formation technology is critical to device reliability especially in the case of short channel LTPS-TFT devices. Ion shower doping with a main ion source of $P_2H_x$ was conducted on ELA Poly-Si. We report the effects of annealing methods on dopant activation and damage recovery in ion-shower doped poly-Si.