• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2020-2022
• /
• 2000

The cross-linked polyethylene(herein after XLPE) insulated power cable emit the methane($CH_4$)gas in the course of chemical cross-linking process. The general stranded conductor easily discharge this methane gas through the gap of each stranded wires. But the special stranded conductor that filled with semi-conducting rubber compound to prevent water penetration which is applied to water proof type of cable(22.9kV CN/CV-W), disturb the methane gas emission. The pre-mold type cable joint shall be expanded gradually by emit of gas left in XLPE insulation. For example, sometimes the corona problem outbreak on a new power distribution line, resulted from the gap between the sleeve and semi-conductive layer of cable joint. If above mentioned problem especially happened on the way of operating. We have to shut down the line and try to discharge the methane gas in cable joint. In this point, we would like to explain the mechanism of methane gas & cable joint and our test result briefly. At last, we are pleased to introduce the solution for preventing reoccurrence of this problem.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.30-36
• /
• 2020

We demonstrated a successful fabrication of 4" Gallium Nitride (GaN)/Diamond High Electron Mobility Transistors (HEMTs) incorporated with Inner Slot Via Hole process. We made in manufacturing technology of 4" GaN/Diamond HEMT wafers in a compound semiconductor foundry since reported [1]. Wafer thickness uniformity and wafer flatness of starting GaN/Diamond wafers have improved greatly, which contributed to improved processing yield. By optimizing Laser drilling techniques, we successfully demonstrated a through-substrate-via process, which is last hurdle in GaN/Diamond manufacturing technology. To fully exploit Diamond's superior thermal property for GaN HEMT devices, we include Aluminum Nitride (AlN) barrier in epitaxial layer structure, in addition to conventional Aluminum Gallium Nitride (AlGaN) barrier layer. The current collapse revealed very stable up to Vds = 90 V. The trapping behaviors were measured Emission Microscope (EMMI). The traps are located in interface between Silicon Nitride (SiN) passivation layer and GaN cap layer.

• 한국토양비료학회지
• /
• 제46권6호
• /
• pp.502-509
• /
• 2013

2011~2012년 2년간 전북 군산과 익산 지역의 관행농 벼를 재배하는 농가를 대상으로 온실가스 배출량 산정을 위한 인벤토리 목록을 구축하였다. 2년 누적 평균 데이터를 사용하여 전과정평가를 수행하고, 탄소성적 산출 및 온실가스 배출의 주요인을 분석하였다. 분석된 온실가스 배출 주요인자들을 대상으로 민감도 분석을 수행하여 온실가스 잠재량을 산정하고, 대상지역 농가들이 적용할 수 있는 온실가스 저감 영농법을 제안하고자 하였다. 관행농 쌀 생산농가를 대상으로 전과정 목록분석을 수행한 결과 탄소성적은 쌀 1 kg 생산을 기준으로 2.21 kg $CO_2.-eq.kg^{-1}$가 발생되었다. 온실가스 중 $CO_2$ 배출량이 가장 많았으나, 지구온난화 지수를 곱하여 이산화탄소 등가 ($CO_2$-eq.)로 환산하면 벼 생산체계의 탄소성적에서 메탄발생 기여도가 가장 컸다. 전체 $CO_2$ 배출량 중 복비생산 공정에서 37%가 발생하였고, 단비생산으로 10%, 벼 재배과정 중 40%가 발생하였다. 벼 재배 중 $CO_2$ 발생원은 농기계의 화석연료 사용에 의한 불완전 연소이다. $CH_4$는 대부분 벼 재배 중에 발생되었으며, 벼논의 메탄 발생 요인은 혐기조건의 담수논이다. $N_2O$은 대부분 벼 재배과정에서 배출되었고, 벼 재배 중 $N_2O$의 발생요인은 복비, 요소 비료, 퇴비 등의 비료시용이었다. 에너지 사용량 변화에 따른 민감도 분석결과 에너지원 중 경유의 민감도가 가장 높았고, 경유사용량을 10% 줄였을 때 약 2.5%의 $CO_2$ 감축 잠재량이 산정되었다. 복비 시용량을 10% 줄였을 때 $CO_2$는 약 1%, $N_2O$는 약 1.8%의 감축잠재량이 산정되었다. 퇴비시용을 10% 줄이면 약 1.5%의 메탄발생이 감소하고, 아산화질소는 약 1% 감소효과가 나타났다. 물떼기 일수가 10일 증가하면 메탄발생량이 약 4.5% 감소되었다. 투입량의 변화에 따른 온실가스 감소 효과가 가장 큰 요인은 벼논 물떼기 일수의 증가 및 경운과 수확시 사용하는 농기계용 경유사용량 감소였다. 그에 따라 중간낙수 및 무경운 등이 탄소배출 저감 영농법으로 제시되었다.

• 한국연소학회지
• /
• 제22권1호
• /
• pp.23-31
• /
• 2017

Large-scale fuel tanks emit massive amount of hardly-combustible VOC mixtures which are light hydrocarbon species in dilution with nitrogen and carbon dioxide. We have developed a lab-scale burner to combust those VOC mixtures by use of a turbulent partially-premixed flame as a pilot flame. For a higher HC treatment ratio, the mixture gases were reformed by a rotating arc plasma device. The results showed that the nitrogen mole fraction and the injecting speed of the VOC mixture influence on the performance of the burner. It was also found that the size of the pilot flame and the power supplied to the plasma device determine the overall HC treatment ratio and the concentrations of CO and NOx in the exhaust gas.

• 한국전기전자재료학회논문지
• /
• 제23권6호
• /
• pp.481-486
• /
• 2010

ENIG (electroless Ni immersion gold) is one of surface finishing which has been most widely used in fine pitch SMT (surface mount technology) and BGA (ball grid array) packaging process. The reliability for package bondability is mainly affected by interfacial reaction between solder and surface finishing. Since the behavior of IMC (intermetallic compound), or the interfacial reaction between Ni and solder, affects to some product reliabilities such as solderability and bondability, understanding behavior of IMC should be important issue. Thus, we studied the properties of ENIG with P contents (9 wt% and 13 wt%), where the P contents is one of main factors in formation of IMC layer. The effect of P content was discussed using the results obtained from FE-SEM(field-emission scanning electron microscope), EPMA(electron probe micro analyzer), EDS(energy dispersive spectroscopy) and Dual-FIB(focused ion beam). Especially, we observed needle type irregular IMC layer with decreasing Ni contents under high P contents (13 wt%). Also, we found how IMC layer affects to bondability with forming continuous Kirkendall voids and thick P-rich layer.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3243-3248
• /
• 2013

The tissue inhibitor of metalloproteinase-2 (TIMP-2) inhibits matrix metalloproteinases activity and modulates cellular proliferation and apoptosis. The human serum albumin-TIMP-2 with folic acid conjugate (termed HT2-folate) was synthesized to promote uptake through folate receptors (FRs), and a corresponding radio-labeled compound was prepared for tumor diagnosis by positron emission tomography (PET). $^{68}Ga$-NOTA-HT2-folate was synthesized from $^{68}Ga$ and the NOTA chelator with HT2-folate. The fusion protein was identified using MALDI-TOF mass spectrometry. The radioligand was prepared with a high radiochemical yield. Cell-surface association of $^{68}Ga$-NOTA-HT2-folate significantly increased over time in FR-positive tumor cells. In animal PET and biodistribution studies, tumor uptake was very high as early as 1 h after radioligand injection. Folate conjugation enhanced the selective receptor-targeting efficacy of HT2 in FRexpressing tumors, and its radioligand will be useful as an in vitro tool and for in vivo tumor diagnosis by PET imaging.

• Elastomers and Composites
• /
• 제59권1호
• /
• pp.8-16
• /
• 2024

As regulations on greenhouse gas emission have strengthened globally, the demand for improved fuel efficiency in automobiles continues to rise. In response, the tire industry is actively conducting research to improve fuel efficiency by enhancing tire performance. In this study, silica-filled epoxidized natural rubber (ENR)/butadiene rubber (BR) blend compounds were manufactured according to ENR types and silica contents, and their physical properties and vulcanizate structure were evaluated. ENR-50, which has a higher epoxide content than ENR-25, exhibited stronger filler-rubber interaction, resulting in superior abrasion resistance. In addition, because of its high glass transition temperature (T_g), the wet grip performance of ENR-50 improved, even though the rolling resistance increased. Increasing the amount of silica had little effect on the abrasion resistance due to the increase in filler-rubber interaction and decrease in toughness. In addition, ENR-50 exhibited better wet grip performance; however, the rolling resistance increased. The results indicated that truck bus radial (TBR) tire tread compounds can be designed by applying ENR-50 to improve wear resistance and wet grip performance. In addition, by applying ENR-25 and reducing the silica contents improve fuel efficiency.

• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.39-50
• /
• 2007

The purpose of this study was to investigate the physico-mechanical properties and characteristics on reduction of formaldehyde and total volatile organic compound (TVOC) emission from particleboard (PB) with added volcanic pozzolan. Pozzolan was added as a scavenger at the level of 1, 3, 5, and 10 wt.% of urea formaldehyde (UF) resin for PB manufacture. The moisture content, density, thickness swelling, water absorption and physical properties of PBs were examined. Three-point bending strength and internal bond strength were determined using a universal testing machine. Formaldehyde and TVOC were determined by desiccator and 20L small chamber methods. With increasing pozzolan content the physical and mechanical properties of the PBs were not significantly changed, but formaldehyde and TVOC emissions were decreased. Because pozzolan has a rough and irregular surface with porous form, it can be used as a scavenger for PBs at a content up to 10 wt.% without any detrimental effect on the physical and mechanical properties.

• Nuclear Engineering and Technology
• /
• 제35권6호
• /
• pp.507-514
• /
• 2003

Recently dry decontamination/surface-cleaning technology using plasma etching has been focused in the nuclear industry. In this study, the applicability of this new dry processing technique are experimentally investigated by examining the etching reaction of $UO_2$, Co, and Mo in r.f. plasma with the etchant gas of $CF_4/O_2$ mixture. $UO_2$ is chosen as a representing material for uranium and TRU (TRans-Uranic) compounds while metallic Co and Mo are selected because they are the principal contaminants in the used metallic nuclear components such as valves and pipes made of stainless steel or inconel. Results show that in all cases maximum etching rate is achieved when the mole fraction of $UO_2\;in\;CF_4/O_2$ mixture gas is $20\%$, regardless of temperature and r.f. power. In case of $UO_2$, the highest etching reaction rate is greater than 1000 monolayers/min. at $370^{\circ}C$ under 150 W r.f. power which is equivalent to $0.4{\mu}m/min$. As for Co, etching reaction begins to take place significantly when the temperature exceeds $350^{\circ}C$. Maximum etching rate achieved at $380^{\circ}C\;is\;0.06{\mu}m/min$. Mo etching reaction takes place vigorously even at relatively low temperature and the reaction rate increases drastically with increasing temperature. Highest etching rate at $380^{\circ}C\;is\;1.9{\mu}m/min$. According to OES (Optical Emission Spectroscopy) and AES (Auger Electron Spectroscopy) analysis, primary reaction seems to be a fluorination reaction, but carbonyl compound formation reaction may assist the dominant reaction, especially in case of Co and Mo. Through this basic study, the feasibility and the applicability of plasma decontamination technique are demonstrated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.762-767
• /
• 2016

디젤엔진은 다른 엔진과 비교했을 때 열효율이 높고 다양한 연료를 사용할 수 있다는 장점을 가지고 있다. 하지만, 대기오염을 유발하는 배기배출물이 발생한다는 단점도 가지고 있다. 따라서 전 세계적으로 디젤엔진을 사용하는 승용차 및 상용차, 선박 등에 대한 국제규정인 EU Euro 6, IMO MEPC Tier 3 및 US EPA Tier 4 등의 대기환경오염법이 더욱 엄격해져가고 있다. 본 연구에서는 경유를 사용하는 발전용 4행정 디젤엔진을 실험 대상으로 하였으며, 유용성 Ca계 유기금속화합물을 경유에 투입하여 실험 결과를 비교, 분석하였다. Ryu et al. 논문에서는 2행정 디젤엔진에 연료첨가제를 적용했던 연구결과를 발표하였다. 본 논문에서는 4행정 디젤엔진에 연료첨가제를 투입하여 엔진의 성능 및 배기배출물 개선에 대해서 실험을 실시하였다. 본 연구를 통해서 2행정과 4행정 디젤엔진 모두에 연료첨가제를 적용하여 그 결과를 고찰해 볼 수 있었으며 유용성 Ca계 유기금속화합물 연료첨가제가 디젤엔진의 성능(연료소비율, 배기온도) 및 배기배출물(질소 산화물, 일산화탄소)을 개선시킬 수 있음을 확인할 수 있었다.