• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.26-32
• /
• 2005

Surfactants can be used to enhance the mass transfer rate of hydrophobic compounds into the biologically active liquid phase, resulting in an increase in biodegradation rate of toluene. In this study, the mass transfer rate and the biocompatibility of toluene in the presence of various surfactants were evaluated. Four anionic and non ionic surfactants were tested: sodium dodecyl sulfate (SOS), TritonX-100, Tween 80, and BYK-345 (silicone surfactant). Experimental results showed that BYK-345 at the critical micelle concentration (CMC) enhanced the solubility of toluene. However, there was no increase in the solubility of toluene by SOS and TritonX-100 at their CMCs. With the addition of each surfactant into deionized water the mass transfer rate became faster than that of the case with no surfactant. A bottle study using toluene-degrading microorganisms showed that SOS seriously reduced toluene removal presumably due to the toxicity of the anionic surfactant and/or the substrate competition between the surfactant and toluene. In addition, the degradation rate of toluene was decreased in the presence of BYK-345, indicating that BYK-345 adversely affects the activity of microorganisms. However, TritonX-100 and Tween 80 did not decrease the degradation rate of toluene significantly. Rather, at the low concentration of TritonX-100 toluene degradation rate was even increased. Overall the experimental results suggest that TritonX-100 be the appropriate surfactant for enhanced biological degradation of toluene.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.5
• /
• pp.437-442
• /
• 1989

The cmc's of sodium dodecyl sulfate (SDS)/Triton X-100 surfactant mixtures were determined by surface tension measurement at various surfactant compositions. The cmc values were lower than those predicted from ideal mixture. The regular solution theory was applied to calculate the interaction parameter, micellar composition, and the activity coefficients of surfactants in the mixed micelle. The interaction parameter (${\beta}$) was - 2.1. The nonideality arised largely from decreased activity of SDS in the mixed micelle. The mean aggregation numbers (${\bar{n}}$) and micropolarity of hydrocarbon region of the mixed micelles were determined by luminescence probe techniques. The total aggregation number (${\bar{n}}_{SDS}+{\bar{n}}_{TX}$) in mixed micelles showed little dependency on the composition of the micelle. The apparent dielectric constant of the hydrocarbon region of the micelle vs micellar composition plot showed positive deviation from linearity. Emission and emission quenching of excited tris(2,2'-bipyridine)ruthenium(Ⅱ) cation, $(Ru(bpy)_3^{2+})$, by methylviologen ($MV^{2+}$) were also investigated in the mixed micellar solutions. The quenching rate was lowest when the mole fraction of SDS in the surfactant mixtures (${\alpha}_{SDS}$) is about 0.25 and highest at ${\alpha}_{SDS}$ = 0.85. This was explained in terms of combined effects of binding of the cations with the micelle and mobility of the bound cations on the surface of the micelles.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.968-973
• /
• 1998

The critical micelle concentrations($CMC^*$) of the mixed surfactant systems of cationic surfactant cetylpyridinium chloride(CPC) and nonionic surfactant Triton X-100(TX-100) in aqueous solutions of salts(KCl and $Na_2CO_3$) and isomeric butanols(tert-butanol, iso-butanol and n-butanol) were determined by UV spectroscopy method. The various thermodynamic values in aqueous solutions of salts and isomeric butanols were compared with the values in pure water, calculated by means of the equation derived from the pseudo-phase separation model. Thermodynamic parameters($X_1$, $\beta$, ${\gamma}i$, $ai^M$, $C_i$ and ${\Delta}H_{mix}$) were found to have great effects of salts and isomeric butanols on the mixed micellization of CPC/TX-100 mixtures, and also in good agreements with the nonideal mixed micelle model. They showed all negative deviations from the ideal mixed micellar behavior.

• Journal of the Korean Chemical Society
• /
• v.46 no.6
• /
• pp.495-501
• /
• 2002

The critical micelle concentration(CMC) and the counterion binding constant(B) for the mixed micel-lization of sodium n-octanoate(SOC) with n-octylammonium chloride(OAC) were determined as a function of the overall mole fraction of $SOC({\alpha}_1).$ Various thermodynamic parameters($x_i$, $Y_i$, $C_i$, $${\alpha}_i^M$$, and $\Delta$$H_{mix}$) for the mixed micellization of the SOC/OAC systems have been calculated and analyzed by means of the equations derived from the nonideal mixed micellar model. The results show that there are great deviations from the ideal behavior for the mixed micellization of these systems. And other thermodynamic parameters(${\Delta}$$G^0_m$, ${\Delta}$$H^0_m$, and ${\Delta}$$S^0_m$) associated with the micellization of SOC,OAC, and their $mixture({\alpha}_1=0.5)$ have been also estimated from the temperature dependence of CMC and B values, and the significance of these parameters and their relation to the theory of the micelle formation have been considered and analyzed by comparing each other.

• Journal of Adhesion and Interface
• /
• v.24 no.3
• /
• pp.77-85
• /
• 2023

In this research, polymeric anionic surfactants having various molecular weights and acid values were synthesized using a continuous stirred tank reactor (CSTR). The CSTR has an advantage of higher production rate and more constant product properties compared to batch and semi-batch reactors. The polymeric surfactants were made using butyl acrylate as a hydrophobic group and acrylic acid as a hydrophilic group. The synthesized polymeric surfactants were ionized with alkali solution and were used as an anionic surfactant. To investigate the properties as a surfactant, the properties of the synthesized surfactant, such as acid value, critical micelle concentration (CMC) and molecular weight, were measured. The results showed that the acid values of the polymeric surfactants were 60 to 380 and a number average molecular weight were 8,000 to 13,000 g/mol. Also, it was found that the CMC was around 0.01 g/ml, which showed similar level values with ordinary surfactant. To prove the performance of the polymeric surfactant, acrylic emulsion PSAs were synthesized using the acquired polymeric surfactant. The results showed that the maximum peel strength of 21.24 N/25mm when acid value was 150 and molecular weight was 8,500 g/mol. The values of peel strength and initial tack of acrylic emulsion PSAs using polymeric surfactant synthesized in this study showed much higher than those of reference PSAs synthesized using ordinary anionic surfactant, SDS (Sodium Dodecyl Sulfate) and SDS/TRX (Triton X-100).

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2269-2282
• /
• 2018

Mixed micelle formation behavior of cationic surfactant-cetyltrimethylammonium bromide (CTAB) and anionic surfactant sodium dodecyl sulfate (SDS) in aqueous as well as in urea medium from 303.15 K to 323.15 K at 5 K interval was carried out by conductometric method. The differences between the experimental values of critical micelle concentrations (cmc) and ideal critical micelle concentrations ($cmc^{id}$) illustrate the interaction between the amphiphiles studied. The values of micellar mole fraction ($X_1^{Rub}$ (Rubingh), $X_1^M$ (Motomura), $X_1^{Rod}$ (Rodenas) and $X_1^{id}$(ideal) of surfactant CTAB determined by different proposed models and outcome indicate high involvement of CTAB in SDS-CTAB mixed micellization, which enhance by means of the augment of mole fraction of CTAB. The negative value of interaction parameter (${\beta}$) showed an attractive interaction involving CTAB and SDS. Activity coefficients were less than unity in all case, which also reveals the presence of interaction between CTAB & SDS. The negative ${\Delta}G^0_m$ values imply the spontaneous mixed micellization phenomenon. The attained values of ${\Delta}H^0_m$ were positive at inferior temperature, while negative at superior temperature. The negative ${\Delta}H^0_m$ values in urea ($NH_2CONH_2$) medium illustrate exothermic micellization process. The magnitudes of ${\Delta}S^0_m$ were positive in almost all cases. The excess free energy of mixed micelle formation (${\Delta}G_{ex}$) was found to be negative, which indicates the stability of mixed micelle as compared to the individual's components micelles.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.10
• /
• pp.1366-1372
• /
• 2021

Bacterial nanocellulose (BNC) is a biocompatible material with a lot of potential. To make BNC commercially feasible, improvements in its production and surface qualities must be made. Here, we investigated the in situ fermentation and generation of BNC by addition of different cellulosic substrates such as Avicel and carboxymethylcellulose (CMC) and using Komagataeibacter sp. SFCB22-18. The addition of cellulosic substrates improved BNC production by a maximum of about 5 times and slightly modified its structural properties. The morphological and structural properties of BNC were investigated by using Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy and X-ray diffraction. Furthermore, a type-A cellulose-binding protein derived from Clostridium thermocellum, CtCBD3, was used in a novel biological analytic approach to measure the surface crystallinity of the BNC. Because Avicel and CMC may adhere to microfibrils during BNC synthesis or crystallization, cellulose-binding protein could be a useful tool for identifying the crystalline properties of BNC with high sensitivity.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.29-29
• /
• 2002

Reaction of [$Cp^*Rh(NO_3)OTf$] (1) with 2,6-diisopropylaniline under argon led to the formation of $[Cp^*Rh({\eta}^6-2,6-diisopropylaniline)](OTF)_2$, (2). Compound 2 was characterized by NMR, IR, elemental analysis, and X-ray diffraction. Crystallrographc data for 2: orthorhombic, space group $Cmc2_1$, $a=19.850(16){\AA}$, $b=9.870(8){\AA}$, $c=15.774(13){\AA}$, Z = 4, $R(wR_2)=0.0362(0.0938)$.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.240-248
• /
• 2010

The blending effects of surfactants on the polystyrene emulsion polymerization were studied. The blending of Triton X-100 and SDS affects to the interfacial properties of the styrene monomer and water phases, and finally, the properties of the polystyrene latex particles. As the blending ratio of SDS/Triton X-100 increases, the interfacial tension and CMC of the blended surfactants were decreased and results in a reducing the size of the latex particles. It was found that the interfacial tension was reduced when the surfactant were blended. By increasing the SDS content, the interfacial tension was reduced, and, at a certain condition, the interfacial tension was reached to an extremely low value to form micro-emulsion and the nano-sized latex particles (80~110 nm).

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.1
• /
• pp.13-22
• /
• 1995

Phase relations of the Pd-Sb system were investigated using the sealed-capsule technique; the quenched run products were studied by reflected light microscopy, X-ray diffraction, and electron microprobe analysis. Eight binary phases were confirmed to exist in the system: Pd20Sb7, Pd31Sb12, Pd8Sb3 (mertieite II), Pd5Sb2, Pd2Sb, Pd5Sb3, PdSb (sudburyite), and PdSb2, (unnamed PdSb2), The X-ray powder diffraction data of all the phases, except for Pd5Sb3, however, may be indexable on an orthorhombic cell, space group Cmc2, with a=3.362(1), b=17.484(7), c=6.934(2)$\AA$. Some physical properties as well as re-determined cell parameters are newly established. A revised phase relations of the Pd-Sb system are presented.