• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2021

This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).

• Clinical Endoscopy
• /
• v.51 no.6
• /
• pp.600-601
• /
• 2018

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.201.1-201.1
• /
• 2000

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.117-126
• /
• 2022

In this study, thermoplastic composites were manufactured using ABS(acrylonitrile butadiene styrene), PC(polycarbonate), and POE(polyolefin elastomer), which are thermoplastic plastics. Twin screw extruder and injection molding were used to manufacture thermoplastic composites. When the ABS/PC/POE thermoplastic composite material was manufactured, the POE mass fraction was set to 1 to 5 wt.%, and the thermal and mechanical properties according to the POE mass fraction were analyzed. Based on the physical properties of ABS/PC/POE, a 3D model in the form of an e-bike frame was created. After setting the boundary conditions, when an external load is applied, geometry simulation was performed to predict product performance. The ABS/PC/POE thermoplastic composite material exhibited the best physical properties when the mass fraction of POE was 3 wt.%. In the simulation results for the physical properties of the 3D model in the form of an e-bike frame, the best physical properties were shown when the mass fraction of POE was 2 ~ 3 wt.%. As a result, the manufacturing conditions for ABS/PC/POE thermoplastic composite materials were set, and research was conducted to reduce product development costs and development time.

• Analytical Science and Technology
• /
• v.10 no.5
• /
• pp.1087-1104
• /
• 1997

• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.02a
• /
• pp.168-168
• /
• 1996

• Mass Spectrometry Letters
• /
• v.9 no.4
• /
• pp.110-114
• /
• 2018

Since accumulation of chemicals in deciduous teeth can occur from the second trimester of fetal development to shedding, a deciduous tooth has been considered as an attractive biomatrix for estimating individual chemical exposures recently. Therefore, detection of organic chemicals from teeth has received an increasing attention in exposomics research. Most previous studies on organic chemical analysis of teeth not only focused on a few targeted chemicals but also ignored potential contaminants from an enamel surface or a dental pulp. Recently, our group started developing a multi-class organic analysis method for deciduous teeth and tried to find a proper incubation condition of tooth materials. Our results showed that incubation with methanolic HCl provided the best performance among tested.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.715-722
• /
• 1995

The structural characterization for series of polyesters has been done by time-of-flight secondary ion mass spectrometry (TOF-SIMS). Polymer fragments and intact oligomers composed of large numbers of repeat units have been investigated. Transesterification of polyesters in trifluoroacetic acid (TFA) and chlorodifluoroacetic acid (CFA) was monitored and reaction products were identified using TOF-SIMS. The shapes and intensities of clusters in transesterification spectra show good agreement with the theoretical isotope pattern. TOF-SIMS spectra were used to obtain information about the progress of the transesterification reaction.

• Journal of Chest Surgery
• /
• v.48 no.6
• /
• pp.426-428
• /
• 2015

A 70-year-old man who visited Samsung Medical Center reported experiencing palpitation for 2 weeks. He had undergone excision of a mass in the right buttock due to rhabdomyosarcoma 7 years prior to this visit. Transesophageal echocardiography showed a pedunculated mass in the left ventricle, which was thought to be a vegetation of infective endocarditis, metastasis of the primary tumor, or thrombus. He underwent removal of the cardiac tumor, and the pathologic report was metastatic rhabdomyosarcoma. Thus, here, we report a rare case of metastatic rhabdomyosarcoma in the left ventricle.

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.309-317
• /
• 2005

It is expected that fully-implantable middle-ear hearing devices (FIMEHDs) will soon be available with the advantages of complete concealment, easy surgical implantation, and low power operation to resolve the problems of semi-implantable middle-ear hearing devices (SIMEHDs) such as discomfort of wearing an external device and replacement of battery. Over the last 3 years, a Korean research team at Kyungpook National University has developed an FIMEHD called ACRHS-1 based on a differential floating mass transducer (DFMT). The main research focus was functional improvement, the establishment of easy surgical procedures for implantation, miniaturization, and a low-power operation. Accordingly, this paper reviews the overall system architecture, functions, and experimental results for ACRHS-1 and its related accessories, including a wireless battery charger and remote controller.