• Nuclear Engineering and Technology
• /
• v.4 no.4
• /
• pp.273-279
• /
• 1972

Requirements necessary for the construction of a fast critical assembly in this country are briefly reviewed. The critial masses of a spherical plutonium core with various spherical reflectors and its thicknesses are calculated using IDX, which is a computer code written for fast reactor analysis. The compilation of this code was made on CDC 3300/Master and UNIVAC 1106/EXEC 8. The calculated results are completely depicted, and compared with other results in this report. The Russian formatted 29 group cross section set generated by ETOX-2 using ENDF/B Version II file at Hanford is used in the calculations.

• Nuclear Engineering and Technology
• /
• v.2 no.2
• /
• pp.67-72
• /
• 1970

The measurements of the fast neutron flux and its spectrum have been carried out by the threshold detectors in the central thimble of TRIGA Mark-II reactor operating at 250 KW. The following reactions have been employed for these measurements, viz : Ni$^{58}$ (n, p) Co$^{58}$ ； $Mg^{24}$ (n, p) Na$^{24}$ ； $Al^{27}$ (n, $\alpha$) Na$^{24}$ . From the activation data the fast neutron spectrum were calculated by CDC-3600 computer making use of two semi-empirical methods. It has been verified that the validity of assumption of a fission spectrum in the central thimble exists only above 1 to 2 Mev energy level. With this spectrum, a fast neutron flux in the range of 1 $\times$ 10$^{12}$ n/$\textrm{cm}^2$-sec above the energy of 2.6 Mev was observed in the central thimble of TRIGA MARK-II reactor.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.4
• /
• pp.60-73
• /
• 1973

The reactor noise analysis was performed by the cross correlation method using two detectors to determine the dynamic stability and the system parameter of TRIGA Mark-II reactor under critical and subcritical conditions. The a values turned out to be 46.67 and 70.04 respectively at zero power and full power under critical condition, while 79.47 and 97.59 respectively at the safety rod dropping and the regulating rod dropping under subcritical condition. Prompt neutron life time of TRIGA Mark-II reactor measured 107 and 160 $\mu$sec, and shut down margin was -10.03$\times$10-4 at the safety rod dropping and -29-43$\times$10-4 at the regulating rod dropping CDC 3100/MSOS digital computer, HITACHI 505 Analog computer, and preamplifier, bandpass filter, FM modulator or demodulator designed for this specific purpose, were employed for the present investigation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.2
• /
• pp.170-179
• /
• 2017

The purpose of this study was to compare the cariogenicity of commercially available bovine milk and low-fat milk in a biofilm model using the CDC Biofilm Reactor. Streptococcus mutans ATCC 25175 biofilms were formed on saliva coated bovine enamel slabs in a CDC Biofilm Reactor. Biofilms were exposed three times per day to one of the following materials: commercial whole milk (fat content: 3.4%), low-fat milk (fat content: 1%), or 0.9% NaCl. Medium pH was measured at different time points. After 5 days, biofilms were separated from slabs to evaluate the CFUs. The biofilm thickness was observed by confocal laser-scanning microscopy (CLSM). Enamel slab's demineralization was assessed by measuring surface microhardness before and after the experiment. For microhardness and CFUs assessment, no significant difference was found among the three groups. All groups showed similar pattern of medium pH change and biofilm thickness. Our results showed that there was no difference in the cariogenicity between whole milk and low-fat milk. Both milks were relatively non-cariogenic compared to the control group.

• Membrane and Water Treatment
• /
• v.9 no.3
• /
• pp.195-203
• /
• 2018

N-acetylcysteine (NAC) has been widely used as an initial mucolytic agent and is generally used as an antioxidant to help alleviate various inflammatory symptoms. NAC reduces bacterial extracellular polymeric substances (EPS) production, bacterial adhesion to the surface and strength of mature biofilm. The efficacy has been shown to inhibit proliferation of gram-positive and gram-negative bacteria. In membrane bioreactor (MBR) processes, which contain a variety of gram negative bacteria, biofilm formation has become a serious problem in stable operation. In this study, use of NAC as an inhibitor of biofilm contamination was investigated using the center for disease control (CDC) reactors with MBR sludge. Biomass reduction was confirmed with CLSM images of membrane surfaces by addition of NAC, which was more efficient as the concentration of NAC was increased to 1.5 mg/mL. NAC addition also showed decreases in EPS concentrations of the preformed biofilm, indicating that NAC was able to degrade EPS in the mature biofilm. NAC addition was also effective to inhibit biofilm formation by MBR sludge, which consisted of various microorganisms in consortia.

• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.314-327
• /
• 1999

A subchannel analysis code MATRA applicable to PWRs and ALWRs has been developed to be run on an IBM PC or HP WS based on the existing CDC CYBER mainframe version of COBRA-Rf-1. This MATRA code is a thermal-hydraulic analysis code based on the subchannel approach for calculating the enthalpy and How distribution in fuel assemblies and reactor cores for both steady-state and transient conditions. HATRA has been provided with an improved structure, various functions, and models to give more convenient user environment and to enhance the code accuracy. Among them, the pressure drop model has been improved to be applied to non-square-lattice rod arrays, and the models for the lateral transport between adjacent subchannels have been improved to enhance the accuracy in predicting two-phase flow phenomena. The predictions of MATRA were compared with the experimental data on the flow and enthalpy distribution in some sample rod-bundle cases to evaluate the performance of MATRA. All the results revealed that the predictions of MATRA were better than those of COBRA-IV-I.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.4
• /
• pp.302-311
• /
• 2015

The purpose of this study was to evaluate the antibacterial properties of a sealant containing S-PRG filler compared to those of two contemporary commercial sealants to determine the inhibition of bacterial growth in broth culture and biofilm formation using the CDC Biofilm Reactor. The BeautiSealant containing S-PRG filler, the fluoride releasing Clinpro$^{TM}$ sealant, which are known to have higher antibacterial effects, and the non-fluoride releasing Concise$^{TM}$ sealant were selected for this study. A Streptococcus mutans culture in BHI broth without sealant served as a negative control in the planktonic growth inhibition test. As a result, bacterial growth was inhibited in all three sealant groups compared to that in the control. The Clinpro$^{TM}$ sealant showed a significantly reduced number of CFUs compared to those of the BeautiSealant and Concise$^{TM}$ sealants. However, no significant difference was detected between the BeautiSealant and Concise$^{TM}$ sealants. The Clinpro$^{TM}$ sealant significantly decreased biofilm formation compared to that by the BeautiSealant and Concise$^{TM}$ sealants. No significant difference was observed between the BeautiSealant and Concise$^{TM}$ sealants. In conclusion, the sealant containing S-PRG filler had a less potent anti-bacterial property and increased biofilm formation capacity compared to those of the fluoride releasing Clinpro$^{TM}$ sealant.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.188-195
• /
• 2020

This study is aimed to evaluate and compare the surface roughness and microbial adhesion to alkasite restorative material (Cention N), resin-modified glass ionomer (RMGI), and composite resin. And to examine the correlation between bacterial adhesion and surface roughness by different finishing systems. Specimens were fabricated in disk shapes and divided into four groups by finishing methods (control, carbide bur, fine grit diamond bur, and white stone bur). Surface roughness was tested by atomic force microscope and surface observation was performed by scanning electron microscope. Colony forming units were measured after incubating Streptococcus mutans biofilm on specimens using CDC biofilm reactor. Cention N surface roughness was less than 0.2 ㎛ after finishing procedure. Control specimens of resin and Cention N specimens were significantly (p = 0.01) rougher. Pearson correlation coefficient (PCC = 0.13) indicated a weak correlation between surface roughness and S. mutans adhesion to the specimens. Compared with resin specimens, RMGI and Cention N showed lower microbial adhesion. Surface roughness and bacterial adhesion were not significantly different, regardless of the finishing systems.

• Journal of Periodontal and Implant Science
• /
• v.47 no.4
• /
• pp.219-230
• /
• 2017

Purpose: The purpose of this study was to compare the characteristics of single- and dualspecies in vitro oral biofilms made by static and dynamic methods. Methods: Hydroxyapatite (HA) disks, 12.7 mm in diameter and 3 mm thick, were coated with processed saliva for 4 hours. The disks were divided into a static method group and a dynamic method group. The disks treated with a static method were cultured in 12-well plates, and the disks in the dynamic method group were cultured in a Center for Disease Control and Prevention (CDC) biofilm reactor for 72 hours. In the single- and dual-species biofilms, Fusobacterium nucleatum and Porphyromonas gingivalis were used, and the amount of adhering bacteria, proportions of species, and bacterial reduction of chlorhexidine were examined. Bacterial adhesion was examined with scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). Results: Compared with the biofilms made using the static method, the biofilms made using the dynamic method had significantly lower amounts of adhering and looser bacterial accumulation in SEM and CLSM images. The proportion of P. gingivalis was higher in the dynamic method group than in the static method group; however, the difference was not statistically significant. Furthermore, the biofilm thickness and bacterial reduction by chlorhexidine showed no significant differences between the 2 methods. Conclusions: When used to reproduce periodontal biofilms composed of F. nucleatum and P. gingivalis, the dynamic method (CDC biofilm reactor) formed looser biofilms containing fewer bacteria than the well plate. However, this difference did not influence the thickness of the biofilms or the activity of chlorhexidine. Therefore, both methods are useful for mimicking periodontitis-associated oral biofilms.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.160-169
• /
• 2019

Purpose: The purpose of this study was to evaluate the antimicrobial effects of a toothbrush with light-emitting diodes (LEDs) on periodontitis-associated dental biofilm attached to a zirconia surface by static and dynamic methods. Materials and Methods: Zirconia disks (12 mm diameter, 2.5 mm thickness) were inserted into a 24-well plate (static method) or inside a Center for Disease Control and Prevention (CDC) biofilm reactor (dynamic method) to form dental biofilms using Streptococcus gordonii and Fusobacterium nucleatum. The disks with biofilm were subdivided into five treatment groups-control, commercial photodynamic therapy (PDT), toothbrush alone (B), brush with LED (BL), and brush with LED+erythrosine (BLE). After treatment, the disks were agitated to detach the bacteria, and the resulting solutions were spread directly on selective agar. The number of viable bacteria and percentage of bacterial reduction were determined from colony counts. Scanning electron microscopy (SEM) was performed to visualize alterations in bacterial morphology. Results: No significant difference in biofilm formation was observed between dynamic and static methods. A significant difference was observed in the number of viable bacteria between the control and all experimental groups (P < 0.05). The percentage of bacterial reduction in the BLE group was significantly higher than in the other treated groups (P < 0.05). SEM revealed damaged bacterial cell walls in the PDT, BL, and BLE groups, but intact cell walls in the control and B groups. Conclusion: The findings suggest that an LED toothbrush with erythrosine is more effective than other treatments in reducing the viability of periodontitis-associated bacteria attached to zirconia in vitro.