• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.353-358
• /
• 2012

Wireless sensor networks consist of resource constraint devices which typically send data measured by sensors attached to the end devices towards a coordinator. The most often used medium access control protocol used in wireless sensor networks is the standard IEEE 802.15.4, where it is wireless standard introduced for low power, low cost wireless communication with moderate data rates. In this paper, we present implementation of both the IEEE 802.15.4 protocol stack and UART interface on the TI CC2530. We show that data via UART of our implemented IEEE 802.15.4 board are transmitted correctly in terms of captured frames.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.108-113
• /
• 1993

This paper proposes a method for obtaining blend surfaces between machining data of surfaces. This blending algorithm consists of trangation, detection, tracing, construction of blend surfaces, and generation of machining data for the blend surfaces. Inpus of the algorithm are a blend radius and machining data of surfaces to be blended. CL data as well as CC data can be applied as an input machining data of the algorithm.

• Human Ecology Research
• /
• v.55 no.4
• /
• pp.351-362
• /
• 2017

Collaborative consumption (CC) occurs in organized systems or networks in which participants conduct sharing activities in the form of renting, lending, trading, bartering, and swapping of goods, services, transportation solutions, space, or money. Information and communications technologies (ICTs) that have emerged with CC. CC is expected to alleviate social problems such as hyper-consumption, pollution, and poverty by lowering the cost of economic coordination. In this study, we investigate the influence of educational experience and expected benefits of CC participation (intended to using and providing CC) of Adolescent Consumers. The subjects for the study were 418 high school students. Data was analyzed through frequency analysis, mean, standard deviation, t-test, ANOVA, Pearson's correlation, and hierarchical multiple regression analysis using SPSS Win 21.0. The results of this study are as follows. First, the significant positive relationship found between CC participants (intent to use and provide CC), educational experience (home education, school education, and mass media) and expected benefits (social benefit, economic benefit, enjoyment, community effect, and reputation). Second, enjoyment, mass media, reputation, social benefit, home education and school education values were variables that influenced the using participation intention for CC. Third, the major variables influencing the providing participation intention CC were home education, enjoyment, gender, community effect, and mass media values.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.89-98
• /
• 2010

In current digital broadcasting systems, GEM(Globally Executable MHP)-based middlewares such as MHP(Multimedia Home Platform), OCAP(OpenCable Application Platform), ACAP(Advanced Common Application Platform) are the norm. Despite much of the common characteristics shared, such as MPEG-2 and DSM-CC(Digital Storage Media-Command and Control) protocols, the information and data structures they need are slightly different, which results in incompatibility issues. In this paper, in line with an effort to develop an integrated DTV middleware, we propose a general-purpose, reconfigurable DSM-CC architecture for supporting various standard GEM-based middlewares without code modifications. First, we identify DSM-CC components that are common and thus can be shared by all GEM-based middlewares. Next, the system is provided with middleware-specific information and data structures in the form of XML. Since the XML information can be parsed dynamically at run time, it can be interchanged either statically or dynamically for a specific target middleware. As for the performance issues, the response time and usage frequency of DSM-CC module highly contribute to the performance of STB(Set-Top-Box). In this paper, we also propose an efficient application cache management strategy and evaluate its performance. The performance result has shown that the cache strategy reflecting user preferences greatly helps to reduce response time for executing application.

• Journal of Information Processing Systems
• /
• v.11 no.2
• /
• pp.266-279
• /
• 2015

In this paper, we propose a novel block cipher mode of operation, which is known as the counter chain (CC) mode. The proposed CC mode integrates the cipher block chaining (CBC) block cipher mode of operation with the counter (CTR) mode in a consistent fashion. In the CC mode, the confidentiality and authenticity of data are assured by the CBC mode, while speed is achieved through the CTR mode. The proposed mode of operation overcomes the parallelization deficiency of the CBC mode and the chaining dependency of the counter mode. Experimental results indicate that the proposed CC mode achieves the encryption speed of the CTR mode, which is exceptionally faster than the encryption speed of the CBC mode. Moreover, our proposed CC mode provides better security over the CBC mode. In summary, the proposed CC block cipher mode of operation takes the advantages of both the Counter mode and the CBC mode, while avoiding their shortcomings.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.466-466
• /
• 2006

• Progress in Medical Physics
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2023

Purpose: Although ionization chambers are widely used to measure beam commissioning data, point-by-point measurements of all the profiles with various field size and depths are time-consuming tasks. As an alternative, we investigated the feasibility of a linear diode array for commissioning a treatment planning system. Methods: The beam data of a Varian TrueBeam^® radiotherapy system at 6 and 10 MV with/without a flattening filter were measured for commissioning of an Eclipse Analytical Anisotropic Algorithm (AAA) ver.15.6. All of the necessary beam data were measured using an IBA CC13 ionization chamber and validated against Varian "Golden Beam" data. After validation, the measured CC13 profiles were used for commissioning the Eclipse AAA (AAA_CC13). In addition, an IBA LDA-99SC linear diode array detector was used to measure all of the beam profiles and for commissioning a separate model (AAA_LDA99). Finally, the AAA_CC13 and AAA_LDA99 dose calculations for each of the 10 clinical plans were compared. Results: The agreement of the CC13 profiles with the Varian Golden Beam data was confirmed within 1% except in the penumbral region, where ≤2% of a discrepancy related to machine-specific jaw calibration was observed. Since the volume was larger for the CC13 chamber than for the LDA-99SC chamber, the penumbra widths were larger in the CC13 profiles, resulting in ≤5% differences. However, after beam modeling, the penumbral widths agreed within 0.1 mm. Finally the AAA_LDA99 and AAA_CC13 dose distributions agreed within 1% for all voxels inside the body for the 10 clinical plans. Conclusions: In conclusion, the LDA-99SC diode array detector was found to be accurate and efficient for measuring photon beam profiles to commission treatment planning systems.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.177-178
• /
• 2007

WiBro system provides reliable broadband communication services for mobile and portable subcribers. It allows interference-free reception under the conditions of multipath propagation and transmission errors. Thus, powerful channel-error correction ability Is required. CC/CTC Decoder which Is mandatory for WiBro system needs lots of computations for real-time operation. So, it is desired to design a CC/CTC Decoder having highly optimized hardware scheme for low latency operation under high data rates. This paper proposes an efficient CC/CTC Decoder structure for high data rate WiBro system. Particularly, the proposed CTC Decoder architecture reduces decoding delay by applying pipelining and multiple decoding blocks. Simulation results show that reduction of about 80% of processing time is enabled with the proposed CC/CTC Decoder despite of increase in are.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.21 no.1
• /
• pp.16-27
• /
• 2015

Purpose: This study evaluates the level of cultural competence (CC) and educational needs for cultural competence in nursing (CCN) in undergraduate nursing students. Methods: A self-report instrument was used to measure CC and educational needs for CCN. Questionnaires were completed by 330 nursing students in three nursing colleges. Descriptive statistics, a t-test, an ANOVA, Pearson correlation analyses, and multiple regression were used to analyze the data. Results: The mean CC score was 2.99 and the mean CCN educational needs score was 7.1. CC positively correlated with educational needs for CCN. The regression model explained 36% of the variance in CC. Factors affecting CC were school grades, multicultural education experience, frequency of meeting foreigners, length of encounters with foreigners, foreign-language fluency, and degree of interest in multicultural nursing. Conclusion: To strengthen the CC of students, nursing educators should develop an educational program for CCN and incorporate CCN into nursing school curricula.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.536-545
• /
• 2019

An experiment was conducted to evaluate the adsorptive removal of Pb(II) from an aqueous solution using a mixture of spent coffee grounds and chitosan on beads (CC-beads). Various parameters affecting the adsorption process of Pb(II) using CC-beads were investigated. Based on the experimental data, the adsorption kinetics and adsorption isotherms were analyzed for their adsorption rate, maximum adsorption capacity, adsorption energy and adsorption strength. Moreover, the entropy, enthalpy and free energy were also calculated by thermodynamic analysis. According to the FT-IR analysis, a CC-bead has a very suitable structure for easy heavy metal adsorption. The process of adsorbing Pb(II) using CC-beads was suitable for pseudo-second order kinetic and Langmuir model, with a maximum adsorption capacity of 163.51 (mg/g). The adsorption of Pb(II) using CC-beads was closer to chemical adsorption than physical adsorption. In addition, the adsorption of Pb(II) on CC-beads was exothermic and spontaneous in nature. CC-beads are economical because they are inexpensive and also the waste can be recycled, which is very significant in terms of the continuous circulation of resources. Thus, CC-beads can compete with other adsorbents.