• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.196-208
• /
• 2018

The effect of channel-system of zeolite on methanol-to-DME reaction was studied. Results revealed that channels size and topology affect catalyst lifetime, type and location of coke precursors. FER and MFI showed the best resistance towards coke deposition, whilst fast deactivation was observed on MOR. Although the higher concentration and strength of acid sites, FER structure formed a lower coke amount, preferably located within the pores, while coke cluster deposited on the external surface of MOR. Analysis of acid sites distribution and strength was performed during deactivation-regeneration process. Coke location assessment was also supported by molecular simulations.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.65-71
• /
• 2011

The concrete mixer truck which is in charge of raw materials in civil engineering construction of the concrete loading, transport, placement, is used $6m^3$, $7m^3$ class in domestic(Korea). But in the case of the international construction fields are utilized $9m^3$ or above class because of the large-scale engineering and construction circumstances. In this paper, to develop a large $9m^3$ class mixer drum and the mixer drum in order to complement the technical and discharge that is responsible for stirring the blades by applying optimal design through implementation of the optimal shape of the concrete in the drum maintenance and placement of high-quality effects on increasing discharge such as advanced conventional drum mixer is to secure and differentiated technology. Large, heavy weight in development and uphold the drum mixer vehicle sub-frame is required to settle the design of the existing class mixer drum frames per $6m^3$ changed to account for changes in slope and length using CATIA V5 3D modeling work was performed.

• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.8-18
• /
• 2019

Precast concrete manufacturing has proved economies of scale through the repetitive production by means of standardization, automation, and prefabrication. Advanced digital design and fabrication technologies can empower its benefits by enabling mass customization in the building design and construction. This study analyzed five case studies in terms of 1) design intent and background, 2) module development and facade construction, 3) integrated process among project stakeholder. This article has attempted to establish the following three points in conclusion: 1) Form generating digital design tools such as Rhino, CATIA, Generative Component, and Digital Project were implemented to produce parametric surface pattern and rationalization to maximize existing precast manufacturing benefits. Also, BIM program has been used to promote coordination and communication among engineering consultants and contractors, 2) In addition to traditional precast concrete materials, GFRC, RFP, brick cladding precast and 3D printed mould have been introduced to reduce the weight and cost and to comply the code from the zoning, seismic, and fireproof requirements, 3) Design-assist contract, design-assist financial support, and co-location measures have been introduced to facilitate collaboration between architect, fabricator, and contractor from the beginning of the project.

• 열처리공학회지
• /
• 제32권6호
• /
• pp.270-274
• /
• 2019

In this study, simulation structure analysis was performed for the differential gear system for passenger cars as a prerequisite for the design of the balancing module. The differential gear system was modeled by using CATIA and simulation structure analysis was performed using ANSYS software. The material of the modeled differential gear system uses the mechanical properties of S45C (Q&T). In the structural analysis of the differential gear, the areas where the maximum stress and the maximum strain occurred can be identified. The maximum stress and maximum strain occurred in the pitch circle of the bevel gear. In evaluating the safety factor, it was found that sufficient safety factor was secured. Based on the analysis results for the differential gear, it is expected that it will be a good reference if we design the balancing module device.

• 항공우주시스템공학회지
• /
• 제9권3호
• /
• pp.12-16
• /
• 2015

인간동력 항공기 TORUK MAKTO I에 대하여 양력선이론 및 XFOIL을 사용하여 도출한 공력계수 및 미계수 값과 CATIA를 사용한 관성모멘트 추정 값을 사용하여 지면효과 및 주익과 무게중심 사이의 수직거리 변화가 인간동력 항공기의 세로 정안정성에 미치는 영향과 수평미익(스테빌레이터) 변위각제어에 따른 세로 동안정성 해석 연구를 수행하였다. 연구결과 지면효과가 정적여유에 미치는 영향은 미미했다. 공력중심과 무게중심 사이의 수직거리가 세로 정안정성에 미치는 영향은 매우 컸으며, 수직거리 증가는 세로 정안정성을 증가시켰다. 수평미익 변위각 제어에 따른 세로 동안정성 해석 결과 장주기 진동특성과 감쇄특성이 매우 나쁜 것으로 나타났다. 향후 항공기의 동특성을 고려한 세로 동안정성 해석 및 측풍에 의한 가로 및 방향 안정성 해석연구를 수행할 예정이다.

• Safety and Health at Work
• /
• 제1권1호
• /
• pp.43-50
• /
• 2010

Objectives: The objective of this study was to investigate the effect of chain installation condition on stress distribution that could eventually cause disastrous failure from sudden deformation and geometric rupture. Methods: Fractographic method used for the failed chain indicates that over-stress was considered as the root cause of failure. 3D modeling and finite element analysis for the chain, used in a crane hook, were performed with a three-dimensional interactive application program, CATIA, commercial finite element analysis and computational fluid dynamic software, ANSYS. Results: The results showed that the state of stress was changed depending on the initial position of the chain that was installed in the hook. Especially, the magnitude of the stress was strongly affected by the bending forces, which are 2.5 times greater (under the simulation condition currently investigated) than that from the plain tensile load. Also, it was noted that the change of load state is strongly related to the failure of parts. The chain can hold an ultimate load of about 8 tons with only the tensile load acting on it. Conclusion: The conclusions of this research clearly showed that a reduction of the loss from similar incidents can be achieved when an operator properly handles the installation of the chain.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.88-94
• /
• 2021

Machining operations require the removal of chips to keep the water-soluble cutting oil clean and fresh throughout the operation time. Water-soluble cutting oil for metal processing is diluted using a 3-8% solution in water which is generally replaced every three to six months. This study aims to develop multiple purification devices to efficiently remove fine contaminating particles from water-soluble cutting oil. The 2D concept designs were created using AutoCAD. The designs were drawn using the 3D modelling feature of CATIA. Flow analysis was performed in a bubble purifier using Ansys computational fluid dynamics (CFD). This analysis has aided in improving the design and structure of the device to create the final prototype. Experiments were conducted to check the prototype's performance. Comparisons of the effects of each process variable on the experiment was carried out using ANOVA.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.103-109
• /
• 2021

Fine chips generated by machining have an impact on machine failure and quality of machined products, it is necessary to remove the chips, so the microchip collection and removal device by rotating conveyor belt with neodymium permanent magnets was developed. In this research, to solve the problem for reducing the existing microchips in the tank, a micro-chip removal device by rotating conveyor belt with neodymium permanent magnets developed. In the development of micro-chip removal device, 3D CATIA modeling was used, and the flow analysis and the electromagnetic force analysis were performed with COMSOL Multiphysics program. To evaluate the performance of the prototypes produced, design of experiments (DOE) is used to obtain the effect of neodymium conveyor movement speed on chip removal for the ANOVA analysis of recovered powders. An experiment was conducted to investigate the effect of the conveyor feed rate on the chip removal performance in detail. As a result of the experiment, it was confirmed that the slower the feeding speed of the fine chip removing device, the more efficient the chip removal.

• 한국기계가공학회지
• /
• 제21권2호
• /
• pp.39-45
• /
• 2022

In this study, we investigated whether the interference occurring in forming roll surfaces could be eliminated by increasing the radius of the variable section forming rolls. The surfaces of the rolls capable of forming products with different flange heights and bend angles with the bend line tilted at an angle of 1° from the longitudinal axis were created using the general CAD software CATIA. Roll interferences were determined for the change in the forming roll radius. The minimum gaps between the upper and lower roll surfaces were measured for the change in the forming roll radius, and the roll interferences were calculated from the difference between the measured value and the thickness of the product. It was observed that the thickness of the product had a slight effect on the roll interference when the thickness was between 0.8 and 1.2 mm. It was also observed that the roll interference could be eliminated by increasing the roll radius.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.91-91
• /
• 2017

최근 국민 삶의 질 향상, 건강한 먹거리 인식 및 국내 여건 변화 등으로 벼농사에 비해 상대적으로 소득 수준이 높은 밭작물 생산에 대한 수요가 증가하고 있으나, 관련 농업기계 개발이 미흡하여 밭농업 기계화가 절실한 실정이다. 밭작물의 경우 기계화율이 2015년 56.3%이며, 특히 파종, 이식작업이 5%, 수확작업이 13.3% 수준으로 열악한 실정임. 경운정지 기계화율은 99%를 넘으며, 방제 작업도 기계화율이 85~99% 수준으로 다른 작업에 비해 높은 실정으로, 파종, 이식, 수확작업의 기계화는 밭농업 일관기계를 위하여 반드시 필요하다. 감자는 주요 밭작물 중 하나로, 최근 가공용 소비로 수입량이 증가하여 국내에서 자주식 굴취/선별/수집형 수확기(2011, 농촌진흥청)가 개발되었으나, 가격이 높고 표피손상 등 개선이 필요하여 트랙터 부착형 수집형 감자수확기가 개발 중에 있다. 따라서 본 연구에서는 수집형 감자 수확기 시작기 구조해석을 하려고 한다. 우선 시작기의 도면을 CATIA를 활용하여 3D로 작성한 뒤, MIDAS NFX 시뮬레이션 및 구조해석 프로그램으로 구조해석을 진행하였다. 수행한 해석으로는 선형정적해석으로서 외부하중에 대해 구조물의 변형을 검토하는 해석이다. 재질은 SM45C로 선정하였고, 접촉조건과 구속조건을 설정한 뒤 감자수확기 굴취부에 집중하중을 200 ~ 1000 N 까지 200N 간격으로 선형정적해석을 진행하여 Von-Mises 응력, 허용응력, 극한응력, 안전율을 해석하였다.