• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.41-48
• /
• 2020

Currently, the industry uses MODBUS communication method using RS485 as a communication method used when constructing distributed equipment and networks. However, this method has a rather good transmission and reception distance, but has a disadvantage of being a half-duplex communication method. Therefore, there is a great need for a full-duplex communication method that can simultaneously transmit and receive two-wire communications. Therefore, in this paper, we propose a new communication hardware equipment that can implement full-duplex communication method by communication signal level to overcome the disadvantage of communication speed. The proposed communication hardware is a structure that can transmit and receive at the same time on the same communication line in two equipments communicating in a two-wire system. The characteristic of this communication hardware is that the transmitter generates two-level signal for data transmission, but the receiver generates three-level electric signal according to the status of the transmission data generated by the receiver. The data transmission signal information of the receiver is present at the same time. Therefore, the receiving side can analyze the received signal based on the information on the current transmission signal and can analyze the signal only in the two communicating devices, so it can be seen that the communication security is very excellent.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.122-128
• /
• 2017

In order to simplify the wiring of construction heavy equipment, researches on PLC(Power Line Communication)-CAN(Controller Area Network) communication module are actively proceeding. Even if a PLC-CAN communication module is developed, a simulator capable of judging whether the PLC-CAN communication module is operating normally is needed. In this paper, we designed and developed a simulator that can measure the status of PLC-CAN communication module. We analyzed the characteristics of the power line communication frequency band by analyzing the characteristics of the power line and compared the noise characteristics with the passenger car in order to characterize the heavy equipment noise.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.351-358
• /
• 2017

The most common communication interface for automotive electronic control devices is CAN (Controller Area Network). Sine CAN was first adopted to Daimler vehicles in 1991, all of automobile manufacturers use the CAN communication for in-vehicle networks. However, as the number of electronic control devices connected to the CAN network rapidly increases, the CAN protocol reaches the limit of technology. To overcome this limitation, Bosch introduced the new communication protocol, that is CAN-FD (Flexible Data-rate). In this paper, we analyze the characteristics and limitations of CAN-FD communication according to the topology under the in-vehicle wiring harness environment designed based on the existing classic CAN communication.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.951-956
• /
• 2011

CAN communication developed for communication between electric control devices in vehicle, was recently applied to automatic breaking devices, and can also be applied to field bus for production automation. Recently, field bus is introduced in engine control etc., for large ship. In this paper, cabin access control system is implemented, based on CAN communication. The cabin access control system based on CAN communication consists of access control server, embedded system based on ARM9, and micro-controller built-in CAN controller. The access control server can be able to manage overall access control system by accessing with manager. And embedded system adopted ARM9 processor transmits access information of RFID reader controller connected with CAN networks to server, also performs access control. The embedded system carry CAN frames to server, so it is used as gateway.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1673-1678
• /
• 2019

There are various networks and communication methods are used in industrial communication. Enterprises need to convert communications between industrial devices and networks for production line expansion, factory upgrades, network segmentation, and SI. This requires designers manufactured by many manufacturers to provide communication equipment for data or protocol conversion in order to connect and transmit various other mechanical devices to the network. This paper designed industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using RS485 communication to multiple layers. Each communication module consisted of analog and digital data card, LAN, and CAN-enabled card. The main board processor used Atmega micro-processor, and the RS485 slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

• Journal of Korean Library and Information Science Society
• /
• v.24
• /
• pp.81-106
• /
• 1996

Without an accurate understanding of information needs of library users, an efficient services can't be implement. And we can expect that there is a difference between query statement and actual information needs of users. It also will occur difference in the process of librarian's interpretation of query statement because of an inaccurate presentation and their different working experiences. It means that there is a communication problems between users and librarians. The purpose of this study is to provide the techniques of face to face communication between users and librarians as a method of efficient library service activities. And focused on the importance of non-language communication. The effectiveness of this study are as follows: 1. With the understanding of information flow, librarians can expand the extent of library services. 2. Knowing that how to communicate with users at the a n.0, ppropriate degree, librarians can improve the communication techniques. 3. Expanding the satisfaction of information services and heitening the reliability of users. 4. From the analysis of user information needs, librarians can convert present system to the proper service-oriented system. 5. Knowing the importance of non-language communication, librarians can improve the service environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.463-465
• /
• 2022

The high-intensity focused ultrasound device intermittently operates abnormally due to communication signal interference between the devices during use due to the high frequency radiated during the skin treatment procedure. Communication interference between multi-frequency ultrasound devices can be reduced through CAN communication controller and transceiver design, firmware S/W program and CAN communication module development.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.69-74
• /
• 2010

Now the CAN(controller Area Network) is using electronic modules as a serial communication which is very robust to noise. Especially the CAN is using for automotive part that very popular in which automotive electronic control module, engine controller unit, sensor modules, etc. but the CAN has the order of priority to linking node and also has fault confinement so using in these features that is applied to in factory automation product line. The CAN communication is basically very robust to electric noise so varied applying to others part. In this paper, we suggest to CAN interface for embedded system that is possible for error detection using two CAN nodes on Hi-speed, full-CAN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.133-136
• /
• 2019

Recently, many industrial devices are facing protocol compatibility problems with external monitoring and control systems. This paper designed an industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using rs485 serial communication to multiple layers. Each communication module consisted of analog data card, a digital data card LAN, and a CAN-enabled card. The main board processor used Atmega micro-processor, and the rs485 serial slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.165-166
• /
• 2007

This paper proposes an algorithm to improve the anti-theft function of the CAR_AV using the CAN(Controller Area Network) communication between CAR AV and cluster. Compare to the typical anti-theft algorithms like security code entering, the proposed one is more secure in most cases. The proposed algorithm is suitable for the recent automobile that employ the CAN network as the communication channel between their devices.