• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2019

Purpose: Helmet type bolus for 3D printer is being manufactured because of the disadvantages of Bolus materials when photon beam is used for the treatment of scalp malignancy. However, PLA, which is a used material, has a higher density than a tissue equivalent material and inconveniences occur when the patient wears PLA. In this study, we try to treat malignant scalp tumors by using M3 wax helmet with 3D printer. Methods and materials: For the modeling of the helmet type M3 wax, the head phantom was photographed by CT, which was acquired with a DICOM file. The part for helmet on the scalp was made with Helmet contour. The M3 Wax helmet was made by dissolving paraffin wax, mixing magnesium oxide and calcium carbonate, solidifying it in a PLA 3D helmet, and then eliminated PLA 3D Helmet of the surface. The treatment plan was based on Intensity-Modulated Radiation Therapy (IMRT) of 10 Portals, and the therapeutic dose was 200 cGy, using Analytical Anisotropic Algorithm (AAA) of Eclipse. Then, the dose was verified by using EBT3 film and Mosfet (Metal Oxide Semiconductor Field Effect Transistor: USA), and the IMRT plan was measured 3 times in 3 parts by reproducing the phantom of the head human model under the same condition with the CT simulation room. Results: The Hounsfield unit (HU) of the bolus measured by CT was $52{\pm}37.1$. The dose of TPS was 186.6 cGy, 193.2 cGy and 190.6 cGy at the M3 Wax bolus measurement points of A, B and C, and the dose measured three times at Mostet was $179.66{\pm}2.62cGy$, $184.33{\pm}1.24cGy$ and $195.33{\pm}1.69cGy$. And the error rates were -3.71 %, -4.59 %, and 2.48 %. The dose measured with EBT3 film was $182.00{\pm}1.63cGy$, $193.66{\pm}2.05cGy$ and $196{\pm}2.16cGy$. The error rates were -2.46 %, 0.23 % and 2.83 %. Conclusions: The thickness of the M3 wax bolus was 2 cm, which could help the treatment plan to be established by easily lowering the dose of the brain part. The maximum error rate of the scalp surface dose was measured within 5 % and generally within 3 %, even in the A, B, C measurements of dosimeters of EBT3 film and Mosfet in the treatment dose verification. The making period of M3 wax bolus is shorter, cheaper than that of 3D printer, can be reused and is very useful for the treatment of scalp malignancies as human tissue equivalent material. Therefore, we think that the use of casting type M3 wax bolus, which will complement the making period and cost of high capacity Bolus and Compensator in 3D printer, will increase later.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.275-282
• /
• 2009

The effect of two plant growth-promoting rhizobacteria (PGPR) on plant growth and systemic protection against soft rot disease and stem rot disease of canola (Brassica napus), caused by Erwinia carotovora and Sclerotinia sclerotiorum was investigated in a laboratory and a greenhouse. Selected PGPR strains C4 and D8 were treated to canola seeds by soaking. Strains C4 and D8 significantly not only increased plant height and root length about 74% and 40.3% and also reduced disease severity of soft rot disease by 80% by C4 and D8 respectively, compared to the control. Especially strain C4 showed antifungal activity against 6 fungal pathogens, S. sclerotiorum, Rhizoctonia solani, Botrytis cinerea, Fusarium oxysporum, Phytophthora capsici and Colletotrichum acutatum. In greenhouse experiment, the seed treatment of both of them increased plant height, leaf width and leaf length of canola plant to 19.5% and 24.9%, 11.3% and 15.3%, and 14.1% and 20.7% by C4 and D8, respectively, and reduced disease severity of S. sclerotiorium. These results indicate that these two PGPR strains can decrease disease severity and increased plant growth under greenhouse condition. Therefore, these two bacteria have a potential in controlling Sclerotinia stem rot of canola. These strains have to investigate under field condition to determine their role of antibiosis, induced systemic resistance and plant growth promotion on canola.

• The Korean Journal of Ecology
• /
• v.21 no.3
• /
• pp.269-276
• /
• 1998

The study of the Rana plancyi, was done during the calling period at a pond in Osong, Chungbuk, Korea from May to the middle of August of 1996 and 1997. Five basic types of call-A, B, C, D, E, - were identified in Rana plancyi according to the structure of call types. The structure of A type call has only one pulse, B type call has two pulses and C, D type call has one separated pulse which is called introductory call and pulse group as follow it. On the other hand, E type call has 3-6 separate pulses. The interval between introductory call and pulse group is $0.73{\pm}0.29$ s(n=159) in C type call and $0.60{\pm}0.21$ s (n=48) in D type call. The number of pulses in the pulse group is $30.08{\pm}8.69$ in C type call and $15.78{\pm}2.40$ in D type call. An increase in water temperature induces a decrease in C and D type call duration (C type call r= -0.4153, p<0.001, D type call r=-0.7064, p<0.001). In case of C and D type call, the interval between introductory call and pulse group influenced more call duration than pulse group duration. We regarded A, B type call as a territorial call and C, D type call as a mating call and we recognized that E type call has the function of threat or alarm.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.401-409
• /
• 2019

Heat-resistant microbial hosts are required for bioprocess development using high cell density cultivations at the industrial scale. We report that the thermotolerance of Escherichia coli can be enhanced by overexpressing ybeD, which was known to encode a hypothetical protein of unknown function. In the wild-type E. coli BL21(DE3), ybeD transcription level increased over five-fold when temperature was increased from $37^{\circ}C$ to either $42^{\circ}C$ or $46^{\circ}C$. To study the function of ybeD, a deletion strain and an overexpression strain were constructed. At $46^{\circ}C$, in comparison to the wild type, the ybeD-deletion reduced cell growth half-fold, and the ybeD-overexpression promoted cell growth over two-fold. The growth enhancement by ybeD-overexpression was much more pronounced at $46^{\circ}C$ than $37^{\circ}C$. The ybeD-overexpression was also effective in other E. coli strains of MG1655, W3110, DH10B, and BW25113. These findings reveal that ybeD gene plays an important role in enduring high-temperature stress, and that ybeD-overexpression can be a prospective strategy to develop thermotolerant microbial hosts.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.78-84
• /
• 2022

In this paper, we propose a closed-form based 3D localization method in the presence of multiple signal sources. General localization methods such as TDOA, AOA, and FDOA can estimate a location when a single signal source exists. When there are multiple unknown signal sources, there is a limit in estimating the location. The proposed method calculates a cross-correlation vector of signals received by sensors having an array antenna, and estimates TDOA and AOA values from the cross-correlation values. Then, the coordinate transformation is performed using the position of the reference sensor. Then, the coordinate rotation is performed using the estimated AOA value for the transformed coordinates, and then the three-dimensional position of each emitter is estimated. The proposed method verifies its performance through computer simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.1
• /
• pp.49-56
• /
• 2009

The objective was to determine the effects of supplementation of protected conjugated linoleic acid (CLA), CLA-20 comprising 10% each of cis-9, trans-11 and trans-10, cis-12, on milk production and fatty acid profiles in plasma and milk in lactating dairy cows. Five mid-lactation, multiparous crossbred Holstein Friesian cows with average 402${\pm}$20 kg BW were used in a 5${\times}$5 Latin square design for 21-d periods. Cows were given a total mixed ration (TMR) and supplemented with CLA-20 at 0, 20, 40, 80 and 160 g/d. The results showed that dry matter intake depression occurred in cows supplemented with CLA-20 at 160 g/d. Milk production slightly increased when CLA-20 supplementation was at 20, 40 and 80 g/d. However, 3.5% fat-corrected milk (FCM) was not affected by CLA-20 supplementation. Increased levels of CLA-20 supplementation resulted in a significantly decreased percentage of milk fat. Plasma concentrations of fatty acid were not altered by the amounts of CLA-20 supplementation except for the concentration of trans-10, cis-12 CLA. For all dietary treatments, percentages of fatty acids (C4:0, C6:0, C8:0, C13:0, C14:0 C14:1 C15:0 C15:1 C16:0, C16:1, C18:1n9t, C18:2n6t, C18:2n6c, C20:0, C18:3n6, C18:3n3, C20:1 and C20:3n6) in milk fat were similar. Concentrations of C10:0, C11:0, C12:0 and C18:1n9c were decreased cubically and C18:0 was elevated linearly (p<0.01) according to the increased amounts of CLA-20 supplemented. The linear increase was observed for cis-9, trans-11 CLA (0.62, 1.17, 1.94, 1.87 and 1.82% of total fatty acid), trans-10, cis-12 CLA (0.01, 0.63, 0.67, 0.93 and 0.95% of total fatty acid) and total CLA (0.80, 2.25, 3.16, 3.97 and 3.94% of total fatty acid) in milk fat from 0 to 160 g/d of CLA-20 supplement. In conclusion, concentration of cis-9, trans-11 CLA in milk fat was concomitantly elevated at an increasing rate with the increased amounts of CLA-20. Based on the results in this study, supplementation of CLA-20 at 80 g/d optimally enhanced total CLA in milk fat.

• Korean Journal of Environmental Biology
• /
• v.39 no.2
• /
• pp.218-224
• /
• 2021

This study was conducted to determine the mass-loss rates and the changes in carbon/nitrogen (C/N) ratio of dead woods, which were of following species: Dryobalanops aromatic, D. rappa, and Cratoxylum arborescens. These were dominant tree species in mixed Dipterocarp forests (MDF) and peat swamp forests (PSF) in Brunei Darussalam. In May, 2019, 48 dead wood samples (15 cm×4.8 cm×5 cm) were placed in MDF and PSF sites, and all the samples were collected after 16 months. The effects of species on mass loss were statistically significant (p<0.05); however, no difference was observed in the mass loss obtained from the two forest types (p>0.05). The initial density (g·cm^-3) of the dead woods D. aromatic, D. rappa, and C. arborescens, was 0.64±0.02, 0.60±0.00, and 0.44±0.01, respectively. Also the annual mass loss rate (%) was estimated to be 6.37, 8.17, and 18.53 for D. aromatic, D. rappa, and C. arborescens, respectively. The proportion of dead woods in decay class III was only 25% of C. arborescens samples, which were attacked by wood-feeding invertebrates, such as termites. The C/N ratio decreased significantly in D. aromatic and D. rappa, but the decreasing trend of C/N ratio was not statistically significant in C. arborescens. The results indicate that physical traits of dead woods, such as density, could be one of the main factors causing the decomposition of dead woods initially, as invertebrates such as termites are one of the key decomposers of dead wood in tropical rainforests. In the samples of C. arborescens, which was attacked by invertebrates, nitrogen immobilization occurred to lesser extent as compared to that observed in D. aromatic and D. rappa.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.609-610
• /
• 2008

In this paper, a 110 dB, 1.024 MHz fourth-order single-loop Delta-Sigma sigma modulator has been presented with an over-sampling ratio of 128 and an overload factor of -6 dB for a bandwidth of 4 kHz. In particular, this ${\Sigma}-{\Delta}$ modulator is well suited for high accuracy measure systems. The whole modulator consumes only 3-mW from a single 3.3V supply in a $0.35-{\mu}m$ CMOS technology.

• Journal of Life Science
• /
• v.19 no.12
• /
• pp.1802-1807
• /
• 2009

Platycodin D, a major component of Platycodi radix, is known to have various activities including anti-inflammatory, anti-hyperlipidemic, anti-tumor activities and others. Recently, it was reported that platycodin D inhibits fat accumulation and adipogenesis. The aim of this study was to investigate whether various adipogenic regulators are modulated by platycodin D treatment during the adipogenesis of 3T3-L1 cells. mRNA levels of terminal markers of adipogenesis such as ADIPOQ (adiponectin) and GLUT (glucose transporter) 4, which were quantified by real time PCR, were decreased by platycodin D treatment. mRNA expression of PPAR (peroxisome proliferator-activated receptor) $\gamma$ and C/EBP (CCAAT/enhaner binding protein) $\alpha$, which are central transcription factors of adipogenesis, were also decreased by platycodin D treatment. To elucidate the detailed molecular mechanism of platycodin D-induced inhibition of adipogenesis, we analyzed mRNA expression of upstream regulators of PPAR$\gamma$ and C/EPB$\alpha$. mRNA levels of the pro-adipogenic regulators, KROX20 and KLF (Kruppel-like factor) 15 were markedly down-regulated by platycodin D treatment. On the other hand, mRNA expression of CHOP (C/EBP homologous protein), an anti-adipogenic regulator, was significantly up-regulated by platycodin D treatment. mRNA levels of other pro-adipogenic regulators, C/EBP$\beta$ and C/EPB$\delta$, were not affected by platycodin D treatment, and another anti-adipogenic regulator, C/EBP$\gamma$ was also not affected by platycodin D treatment. Taken together, these results suggest that platycodin D-induced inhibition of adipogenesis is mediated by gene interactions including the down-regulation of pro-adipogenic regulators, KROX20 and KLF15, and the up-regulation of an anti-adipogenic regulator, CHOP.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.151-155
• /
• 1999

We proposed the beam tilted antenna by aperture coupled microstrip array, found out the values of design parameters by using Ensemble 5.1 of Ansoft Co., and analysed the performance of fabricated antenna. In order to point to the fixed satellite on the nothern hemisphere, 3 dB beamwidth of this antenna is 25$^{\circ}C$ to 65$^{\circ}C$. Operation bandwidth is 2.51GHz to 2.59GHz. The structure of this antenna is composed by 3 types of squared patches; reflector, driver, and director. The maximum antenna gain is 6.2dB at 2.56GHz and elevation angle of 42$^{\circ}C$. Front-to-Back ratio is more than 13dB at the same condition.