• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.323-329
• /
• 2012

In order to investigate the rheological properties of myofibrillar protein (MP) mixed with tapioca starch (TS; 0, 1, and 2%) at various salt concentrations (0.1, 0.3, and 0.45 M), viscosity, gel strength, differential scanning calorimeter (DSC) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were measured. Viscosity of MP increased with increasing salt concentrations (p<0.05), but not with the addition of TS. The addition of TS improved gel strength and cooking yield at all salt concentrations (p<0.05). DSC results demonstrated that the starting peak of TS gelation was observed at $55^{\circ}C$, however, no differences in peak were observed with various salt and TS levels (p>0.05). SDS-PAGE profile also showed no differences in protein bands for pork myofibrillar protein with various salt and TS levels. Based on the model study, pork model sausages with various levels of tapioca (0, 1, and 2%) and TG (1%) were manufactured. The pork model sausages with 2% TS increased pH and water holding capacity (p<0.05), while those with TGase (1%) increased most textural properties, regardless of the addition of TS. Thus, the combination of 1% TG with 2% TS improved the gel strength and water holding capacity in the meat products.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.40-48
• /
• 2010

This study was carried out to investigate the physicochemical and functional properties of Yacon (Polymnia Sonchifolia) powder. The proximate composition of Yacon powder as a dry matter basis was 3.53% moisture content, 1.13% crude protein, 0.40% crude fat, 0.79% crude ash, 1.63% dietary fiber and 92.52% carbohydrate. The major free sugars were identified as fructose and glucose. Analysing total amino acids, 18 kinds of components were isolated from Yacon powder. The essential amino acid contained in Yacon powder accounted for 28.40% of total amino acid, while the non-essential amino acid accounted for 73.61%. Analysing total fatty acids, only 2 kinds - palmitic acid and lauric acid - were detected. Oxalic acid was the major organic acid. The contents of vitamin A, vitamin C and vitamin E were 0.057 mg%, 0.670 mg% and 0.001 mg%, respectively. The mineral contents of Yacon powder were in the order of Zn

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.125-129
• /
• 2000

The ecology of estuarine bacteria in terms of bactenal production and biomass was investigated in Naktong embayment. Intrusion of eutrophic freshwater was one of the major factors affecting on the ecosystem of Naktong embayment. Total bacterial number varied from $2.2{\times}10^5 cells/ml to 9.8{\times}10^5 $ cellslml, and the variation ranges of the bacterial biovolume and biomass were 0.023-0.201TEX>$\mu$$m^3$/cell and 0.010-0.140 TEX>$\mu$g-Clml, respectively, and there was a reciprocal relationship between bacterial number and biomass. Pool size of thymidine varied from 12.93 nM to 44.56 nM. The pool during summer was supposed to be composed of easily utilizable form than the typical one of winter, which suggests thal bacterial productivity measured in summer may be underestimated. Bactenal production varied from 0.12 TEX>$\mu$g-Cllh to 22.38 TEX>$\mu$g-Clllh, and the values were low in winter and increased from spring and reached the highest in summer. The variations of bacterial production showed high correlations with temperature, chlorophyll a, and bacterial biomass. These results suggested that the main source of organic matters which influence the bacterial production in Naktong embayment may be the photosynthetic excretory products of phytoplanktons.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.33-39
• /
• 2010

The electrolytic reduction of a spent oxide fuel involves a liberation of the oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. Accordingly, it is essential to choose the optimum material for the processing equipment that handles the high molten salt. In this study, hot corrosion studies were performed on bare as well as coated superalloy specimens after exposure to lithium molten salt at $675^{\circ}C$ for 216 h under an oxidizing atmosphere. The IN713LC superalloy specimens were sprayed with an aluminized NiCrAlY bond coat and then with an $Y_2O_3$ top coat. The bare superalloy reveals an obvious weight loss due to spalling of the scale by the rapid scale growth and thermal stress. The chemical and thermal stability of the top coat has been found to be beneficial for increasing to the corrosion resistance of the structural materials for handling high temperature lithium molten salts.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.618-623
• /
• 2005

Kimchi was prepared with 2.5% and 5% Monascus purpureus Koji(MPK) paste(20%), fermented at $10^{\circ}C$ for 15 days, and sampled at 3-day intervals during storage. Samples were extracted using 80% ethanol. Ethanol extracts of kimchi prepared with MPK paste (MPK kimchi extracts) and control kimchi extracts at 1mg/mL showed 40% decrease in proliferation of cancer cells, such as AGS, KATOIII, HepG2, and Hela. MPK kimchi extracts showed highest cytotoxic effect against cancer cells compared with control at 2mg/mL. Antibacterial effect of MPK kimchi extracts decreased during fermentation, and was higher than that of control kimchi extracts during fermentation, particularly after six days. The 5% MPK kimchi extracts showed higher antibacterial activity against Escherichia coli O157:H7 and Vibrio parahaemolyticus than other groups. Results indicate kimchi added with M. purpureus Koji paste has stronger antibacterial and anticancer effects in vitro than control kimchi.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.943-948
• /
• 2009

Physical and chemical analyses of water discharged from 4 crowded farms (Sungsan, Pyosun, Wimi and Daejung) in Jeju island were performed from July, 2006 to Dec, 2006, and the result of the analyses showed that hydrogen ion concentrations (pH) for water discharged from Sungsan farm was 7.74, Pyosun was 7.68, Wimi was 7.68 and Daejung was 7.7. Salinity levels for Sungsan, Pyosun and Wimi had an average of 31$\sim$33 $^\circ$/$_\circ$$_\circ$ indicating characteristics of far distance areas, whereas that of Daejung was 28.81 %, which was far lower compared to regular sea water salinity. As the result of measuring dissolved oxygen (DO) for each area, each area showed first graded DO for each discharged water based on water quality level for each sea district. The result of measuring the temperature for discharged water showed that water temperatures for summer were 23$\sim$25$^\circ$C, and those for winter were 16$\sim$ 18$^\circ$C. Nitrogen concentrations for discharged water exceeded each sea area's water quality level in all farms. In the case of phosphate, its average value was 0.48 mg/l for Sungsan, 0.55 mg/I for Pyosun, 0.66 mg/I for Wimi, and 0.44 mg/l for Daejung, and chemical oxygen demand (COD) was shown to be 1.5 mg/l 1.8 mg/I, 1.6 mg/I and 2.3 mg/I for Sungsan, Pyosun, Wimi and Daejung respectively. For suspended solids (SS), the average concentration was 19.3 mg/I, 21.2 mg/I, 21.3 mg/I and 18.5 mg/I for Sungsan, Pyosun, Wimi and Daejung respectively. The results of physical and chemical analyses for discharged water in farms based on time showed that almost all items were shown to increase in the forenoon and decrease, overall, in the afternoon.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.127-137
• /
• 2001

Polychlorinated biphenyls(PCBs) are halogenated aromatic compounds with the empirical formula $C_{12}$ $H_{10-n}$C $l_{n}$(n=1~10), and are a mixture of possible 209 different chlorinated congeners. PCBs were widely used as dielectric fluids for capacitors and transformers, plasticizers, lubricant inks and paint addirives. Once released into the environment, PCBs persist for years because they are so resistant to degradation. In addition to their persistence in the environment, PCBs in ecological food chains undergo biomagnification because of their high degree of lipophilicity. In 1970s, the worldwide production of PCBs was ceased and the import of PCBs was prohibited since 1983 in Korea. In spite of these actions, many PCBs seems to be still in use. The environmental load of PCBs will continue to be recycled through air, land, water, and the biosphere for decades to come. This study was conducted to measure the concentrations of PCBs in the serum samples of 112 women by GC/MSD and GC/ECD. The main results of this study were as follows. 1. PCBs were detected in all samples. The mean $\pm$SD levels of PCBs in the serum were 3.613$\pm$0.759 ppb, and median were 3.828 ppb. 2. The correlation coefficients of the concentrations of 13 PCB congeners were from minimum, 0.7913 to maximum, 0.9985, and all was significant(p=0.0001). The correlation coefficient between the concentrations of PCBs and p,p'-DDE was 0.9641(p=0.0001). 3. There was a positive association between age and PCBs' concentrations (simple linear regression ; $R^2$=0.86, $\beta$=0.08023, p<0.001). 4. There was a positive association between total lipids in the serum and PCBs' concentrations (simple linear regression ; $R^2$=0.7058, $\beta$=0.00486, p<0.001). 5. For possible predictors of PCBs and p,p' -DDE levels in the serum, age adjusted model (Y=$\beta$$_{0}$+$\beta$$_1$age+ $B_2$X) was applied. For BMI, major residential area, wether to eat caught fish by angling, where to eat caught fish by angling(by parents in the past), fish consumption, meat consumption, meat consumption, and dairy consumption, there was no association. For total conception frequency and lactation frequency and lactation period, there was negative association.ion.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.311-320
• /
• 2000

In this paper a newly designed oxygenator module was used to perform the experiments for pressure drop and oxygen transport in order to evaluate the efficiency of the artificial lung. Also, distilled water. sodium sulfite solutions used in this experiment were evaluated for the performance of other artificial lungs. Substituted bloods have many advantages over whole blood in studying pressure drop and oxygen uptake. They are relatively inexpensive, and require fewer variables to be controlled. Furthermore, deoxygenation is not necessary when those solutions are used. In addition to these advantages. assays and interpretation of the experimental results are relatively easy. In the case of using the sodium sulfite solution having the same oxygen partial pressure as whole blood. the oxygen transfer rate of the sodium sulfite solution was basically same as that of whole blood. It was concluded in evaluating the function of artificial lungs that the sodium sulfite solution was suited for measuring oxygen transfer rate. In our module, artificial blood was flowed into the outside of hollow fiber membrane. The artificial lung created in this experiment showed that pressure drop was reduced to $1/3\~1/6$ of that compared to the inside-flow case.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.69-75
• /
• 2016

This study investigated the effect of heat treatment conditions not only on the Cr surface crack propagation behaviors but also on the Ni/Cr interfacial reaction characteristics in electroless Ni/electroplated Cr double coating layers on Cu substrate. Clear band layer of Ni-Cr solid solutions were developed at Ni/Cr interface after heat treatment at $750^{\circ}C$ for 6 h. Channeling cracks formed in Cr layer after 1 step heat treatment, that is, heat treatment after Ni/Cr plating, while little channeling cracks formed after 2 step heat treatment, that is, same heat treatments after Ni and Cr plating, respectively, due to residual stress relaxation due to crystallization of Ni layer before Cr plating.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7794-7800
• /
• 2015

Ginsenosides in ginseng berry has been known as functional materials showing physiological effect to the human. Specially, ginseng berry contains plenty of ginsenoside Re, but the study of extraction processes were not enough performed. Accordingly, the purpose of this study was to establish the optimized extraction process for obtaining ginsenoside Re from ginseng berry. The extraction process of ginsenosides was performed in 250 mL extraction flask containing 150 solvent and 10 g of dried ginseng berry. The extracted ginsenoside Re, Rg1 and Rd and total crude ginsenosides from ginseng berry were evaluated by TLC according to the treated conditions (the ratio of alcohol to water, extraction temperature, extraction period, and extraction times). Optimized conditions for extraction was 70% to 30% of the ratio of alcohol to water, $80^{\circ}C$ of extraction temperature, 4 h of extraction period, and 2 times of extraction frequency. The amount of total crude ginsenosides of the extract obtained from the optimized process was 88.6 mg/g based on dried ginseng berry. The composition of ginsenosides from the extracted was 5.5% of Rb1, 5.2% of Rc, 14.3% of Rd, 51.5% of Re, 8.1% of Rf, and 15.7% of Rg1. A protopanaxtriol ginsenosides of whole ginsenosides extracted was about 80%.