• Title/Summary/Keyword: C2+ products

Search Result 4,241, Processing Time 0.041 seconds

Study on the Development of Measuring System for Fermentation Degree of Liquid Swine Manure Using Visible Ray (가시광선을 이용한 돈분뇨 액비 부숙도 측정장치 개발에 관한 연구)

  • Choi, D.Y.;Kwag, J.H.;Park, K.H.;Song, J.I.;Kim, J.H.;Kang, H.S.;Han, C.B.;Choi, S.W.;Lee, C.S.
    • Journal of Animal Environmental Science
    • /
    • v.16 no.3
    • /
    • pp.227-236
    • /
    • 2010
  • This study was conducted to develop an measuring system and method for fermentation degree of liquid swine manure by visible ray. The constituent changes of liquid swine manure were examined. pH gradually increased with time, but EC gradually decreased. Malodor strength decreased gradually with aeration treatment with time. Control needed more time to decrease malodor strength than aeration treatment. In aeration treatment, there was no germination of seeds (radish, chinese cabbage) up to 6 weeks and germination rate at 15th week was over 50%. However, in control, there was no germination up to end of experiment. Circular chromatography method showed that there was change after 10th week in aeration treatment but there was no change up to end of experiment in control. As a result, the fermentation degree of liquid swine manure would have relations among pH, EC, germination rate, malodor concentration, and reaction of circular chromatography. The simple analytical instrument for liquid swine manure consisted of a tungsten halogen and deuterium lamp for light source, a sample holder, a quartz cell, spectrometer for spectrum analyzer, a malodour measuring device, a software, etc. Results showed that the simple analytical instrument that was developed can approximately predict the fermentation degree of liquid swine manure by visible ray. Generally, the experiment proved that the simple analytical instrument was reliable, feasible and practical for analyzing the fermentation degree of liquid swine manure.

Comparative analysis of dietary behavior and nutrient intake of elderly in urban and rural areas for development of "Village Lunch Table" program: Based on 2014 Korea National Health and Nutrition Examination Survey data (농촌 노인의 마을 밥상 개선 프로그램 개발을 위한 도시와 농촌 노인의 식생활 행태 및 영양소 섭취 상태 비교분석 : 2014년 국민건강영양조사 자료를 이용하여)

  • Lee, Youngmi;Choi, Yourim;Park, Hae Ryun;Song, Kyung Hee;Lee, Kyung Eun;Yoo, Chang;Lim, Young Suk
    • Journal of Nutrition and Health
    • /
    • v.50 no.2
    • /
    • pp.171-179
    • /
    • 2017
  • Purpose: We conducted comparative analysis of dietary behavior and food and nutrient intakes of Korean elderly in urban and rural areas using the 2014 Korea National Health and Nutrition Examination Survey (KNHANES). Methods: This study was conducted on 1,239 participants (urban elderly: 867, rural elderly: 372) aged 65 years and over who participated in the health examination and nutrition survey in the 6th 2014 KNHANES. Dietary behaviors, including skipping meals, eating out frequencies, and food and nutrient intakes were analyzed using 24-hour recall data. Analysis of complex sample design data through SPSS 19.0 was used for the analysis. Results: The rate of skipping dinner was higher in urban (6.5%) than in rural elderly (3.6%) (p < 0.05), and the frequency of eating out per week of urban elderly (1.73) was higher than that of rural elderly (1.35) (p < 0.001). The rural elderly consumed a greater amount of grain compared to urban elderly, whereas consumption of water, seaweed food, and dairy products was lower in rural than in urban areas (p < 0.05). The rural elderly consumed significantly less highly unsaturated fatty acids, n-6 fatty acids, phosphorus, iron, vitamin A, carotene, niacin, and vitamin C in comparison with elderly in urban areas. Comparison of the percentages of Dietary Reference Intakes for Koreans (KDRIs) between the two groups showed that intakes of vitamin A and vitamin C were significantly lower in the rural elderly than in urban elderly. Conclusion: The elderly in rural areas showed unbalanced food and nutrient intakes compared to the elderly in urban areas. Therefore, customized nutrition education according to residential areas should be developed and provided to rural elderly to improve their health and nutritional status.

A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design - (디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 -)

  • Kim Seok-Hwa
    • Journal of Science of Art and Design
    • /
    • v.5
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF

Separation of Ferrous Materials from Municipal Solid waste Incineration Bottom Ash (생활폐기물(生活廢棄物) 소각(燒却) 바닥재의 자력선별(磁力選別)에 따른 ferrous material의 분리(分離) 특성(特性))

  • Um, Nam-Il;Han, Gi-Chun;You, Kwang-Suk;Cho, Hee-Chan;Ahn, Ji-Whan
    • Resources Recycling
    • /
    • v.16 no.3 s.77
    • /
    • pp.19-26
    • /
    • 2007
  • The bottom ash of municipal solid waste incineration generated during incineration of municipal solid waste in metropolitan area consists of ceramics, glasses, ferrous materials, combustible materials and food waste and so on. Although the ferrous material was separated by the magnetic separation before the incineration process, of which content accounts for about $3{\sim}11%$ in bottom ash. The formation of a $Fe_3O_4-Fe_2O_3$ double layer(similar to pure Fe) on the iron surface was found during air-annealing in the incinerator at $1000^{\circ}C$. A strong thermal shock, such as that takes place during water-cooling of bottom ash, leads to the breakdown of this oxidation layer, facilitating the degradation of ferrous metals and the formation of corrosion products and it existed as $Fe_2O_3,\;Fe_3O_4\;and\;FeS_2$. So, many problems could occur in the use of bottom ash as an aggregate substitutes in construction field. Therefore, in this study, the separation of ferrous materials from municipal solid waste incineration bottom ash was investigated. In the result, the ferrous product(such as $Fe_2O_3,\;Fe_3O_4,\;FeS_2$ and iron) by magnetic separator at 3800 gauss per total bottom ash(w/w.%) accounted for about 18.7%, and 87.7% of the ferrous product was in the size over 1.18 mm. Also the iron per total bottom ash accounted for about 3.8% and the majority of it was in the size over 1.18 mm.

Rice Quality Characterization According to Damaged Low Temperature in Rice Plant (벼 냉해 발생시 피해정도에 따른 쌀 품질 특성 구명)

  • Kim, Deog-Su;Song, Jin;Lee, Jung-Il;Chun, A-Reum;Jeong, Eung-Gi;Kim, Jung-Tae;Hur, On-Sook;Kim, Sun-Lim;Suh, Sae-Jung
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.54 no.4
    • /
    • pp.452-457
    • /
    • 2009
  • The objective of this study was to provide fundamental data on breeding cultivar and cultural technique to identify quality characterization according to damage degrees in rice when are damaged at low temperature. For induction of cold damage, we treated the irrigation water at $17^{\circ}C$ from the panicle formation stage to the heading date. The rice products were harvested by grades according to the sterility ratio and investigated 5 items of quality analysis including ripened grain ratio, brown/rough rice ratio, 1000 grain weight of brown rice, protein content, and amylose content. The quality analysis were characterized by each items according to the sterility ratio. As a result, the ripened grain ratio was y=1.0444x-7.6597($R^2=0.9874^{**}$), protein content was y=-0.046x+10.875 ($R^2=0.6973^*$), and head rice ratio was y=-0.2306x+104.32 ($R^2=0.634^*$), but the amylose content, brown/rough rice ratio and the milled/brown rice ratio were not significant. The rice plants, which injured by the low temperature, had bad influence in the yield and quality. Consequently, the breeding of rice cultivar and development of cultural technique are required to improve its cold tolerance.

Optimization of Processing Process for Functional Anchovy Fish Sauce in Addition with Raw Sea Tangle (다시마를 첨가한 기능성 멸치액젓 제조조건 확립)

  • Jeong, Min-Hong;Jeong, Woo-Young;Gyu, Hyeon-Jin;Jeong, Sang-Won;Park, Hun-Kyu;Cho, Young-Je;Shim, Kil-Bo
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.25 no.6
    • /
    • pp.1408-1418
    • /
    • 2013
  • To investigate the quality properties of functional anchovy fish sauce added with raw sea tangle, 2%, 5%, and 10% (w/w) of sea tangle was added to 25% (w/w) salted anchovy and then fermented at $20^{\circ}C$. During fermentation period, the amino nitrogen contents were increased at all groups and the highest contents were at 450 days of fermentation with $11.99{\pm}0.08$, $12.51{\pm}0.08$, and $11.95{\pm}0.08mg/mL$ at 2%, 5%, and 10% addition of raw sea tangle, respectively. After later, the contents were keeping at a similar level. VBN contents were continuously increased until 270 days of fermentation with $208.10{\pm}3.50$, $210.00{\pm}4.10$, $215.15{\pm}1.50mg/100ml$ at 2%, 5%, 10% addition of raw sea tangle, respectively. Alginic acid recovery was gradually increased in fermentation duration, showed the highest concentration at 540 days of fermentation with 67.00, 67.25, 67.90% at 2%, 5% and 10% addition of raw sea tangle, respectively. Dietary fiber recovery was rapidly increased at the beginning of fermentation and then decreased slowly as the fermentation is progressed. The highest recovery was at 30 days with 18.7, 18.6, and 17.9%, and the lowest was at 360 days with 8.7 and 11.1% at 2 and 10% addition of raw sea tangle, respectively, and 450 days with 11.4% at 5% sea tangle. The lowest fucoidan contents were exhibited at 30 days of fermentation with 0.07% at both of 2% and 5% addition, and 90 days with 0.10% at 10% addtion of sea tangle. The highest fucoidan contents were 270 days showing 0.24, 0.25, and 0.23% at 2, 5, and 10% addition, respectively. All groups adding different sea tangle concentration were not significantly different at all properties. However, the newly developed products were sufficient to the standard guideline of Korea Food Drug Adminstration. The best processing process of functional anchovy fish sauce in addition with raw sea tangle is 2% addition of raw sea tangle and fermented more than 450 days. The results obtained in this study indicated that the fish sauce added with sea tangle is superior in taste, functions to traditional fish sauce and could be competitive fishery fermented food.

Antioxidant Properties of 7 Domestic Essential Oils and Identification of Physiologically Active Components of Essential Oils against Candida albicans (식물정유 7종의 항산화능 분석 및 Candida albicans 생장 억제 정유의 생리활성 성분 구명)

  • LEE, Sang-Youn;LEE, Da-Song;CHO, Seong-Min;KIM, Jong-Chan;PARK, Mi-Jin;CHOI, In-Gyu
    • Journal of the Korean Wood Science and Technology
    • /
    • v.49 no.1
    • /
    • pp.23-43
    • /
    • 2021
  • In this study, we selected two essential oils, Citrus unshiu and Cinnamomum cassia with superior antioxidant effects from the essential oils of 7 wild plants in South Korea and examined their antimicrobial activity against Candida albicans, which causes dermatitis to identify the antimicrobial components in the essential oils. As a result of measuring DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity, SC50 value of the Citrus unshiu essential oil was 0.010 mg/mL, while for the Cinnamomum cassia essential oil, SC50 value was 0.09 mg/mL. In addition, when ABTS (2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity was measured, SC50 value of the Citrus unshiu essential oil was 0.09 mg/mL, while for the Cinnamomum cassia essential oil, it was 0.06 mg/mL, exhibiting high antioxidant activity. For the minimum inhibitory concentration (MIC), the essential oil of Cinnamomum cassia was 1.25 mg/mL and that of Citrus unshiu was 5 mg/mL, demonstrating a high antimicrobial activity of the Cinnamomum cassia essential oil. Through the thin layer chromatography (TLC) bioassay, we assessed the antimicrobial activity against C. albicans according to the fraction components of the two essential oils. Also, by using preparative TLC (prep. TLC), we obtained the active fractions, and by performing GC/MS analysis of the components with the same Rf value, we identified the antimicrobial-active components. As a result, the main components having antioxidant and antimicrobial activities were cinnamyl acetate, eucalyptol, linalool, and citral of the Cinnamomum cassia essential oil and linalool from the Citrus unshiu essential oil. Also, based on the analysis of the fractional components that showed antioxidant and antimicrobial activities in both of the two essential oils, it was found that linalool has antioxidant activity, while cinnamyl acetate, eucalyptol, citral, and geranyl acetate have antioxidant and antimicrobial activities.

The Production and Geochemistry of Evaporite from the Acid Mine Drainage (산성 광산배수로부터 형성되는 증발잔류광물의 생성량과 지구화학)

  • Park Cheon-Young;Cho Kap-Jin;Kim Seoung-Ku
    • Journal of the Korean earth science society
    • /
    • v.26 no.6
    • /
    • pp.524-540
    • /
    • 2005
  • This study has focused on the amount of evaporites and geochemical characteritics of evaporites from the acid mine drainage and on the variation of constituents in acid mine drainage during evaporation. The various colors of evaporites are frequently observed at the rock surfaces contacting acid mine drainage. In order to produce evaporites in the laboratory, acid mine drainages were sampled from the abandoned mine areas (GTa, GTb, GH and GB) and air-dried at room temperature. During the evaporation of acid mine drainages, TDS, EC values and the concentrations of major and minor ions increased, whereas ER and DO values decreased with time. The concentration of Fe increased gradually with evaporation time in the GTb and GB, whereas GH founded in one day but rapidly not detected in the other day after due to removal of Fe by formation-precipitation of amorphous Fe hydroxide. The amounts of the evaporites were produced in amounts of 4 g (GTa), 5 g (GB), 15 g (GH), and 24 g (GTb) from 4 liter of acid mine drainage after 80 days of the evaporation, respectively. In linear analysis from the products with the parameters which are the EC, TDS, salinity, ER, DO and pH contents in field, the determination coefficients were 0.98, 0.99, 0.98, 0.88, 0.89, and 0.25 respectively. If we measure the parameters in field, it would be easy to estimate the amount of evaporites in acid mine drainage. Gypsum and epsomite were identified in all of the evaporites by x-ray powder diffraction studies. Evaporite (GTb) was heated at 52, 65, 70, 95, 150, 250, and 350oC for one hour in electrical furnaces. Gypsum, $CaSO_4\cdot1/2H_2O$ and kieserite were identified in the heated evaporite by XRD. With increased heating temperature, the intensity of the peak at $7.66/AA$ (diagnostic peak of gypsum), the peak at 5.59A ($CaSO_4{\cdot}1/2H_2O)$ and the peak at $4.83{\AA}$ (kieserite) decreased in x-ray diffraction due to dehydration. In the SEM and EDS analysis for the evaporite, gypsum of well-crystallized, radiating cluster of fibrous, acicular, and columnar shapes were observed in all samples. Ca was not detected in the EDS analysis of the flower structures of GTb. Because of that, the evaporite with flower structures is thought to be eposmite.

Studies on the Hydrolysis of Holocellulose with Trichoderma viride Cellulase - (I) Effect of the treated substrate - (Cellulase에 의(依)한 목재당화(木材糖化)에 관(關)한 연구(硏究) - (I) 기질(基質) 처리(處理)의 효과(効果) -)

  • Cheong, Tae-Seong;Min, Du-Sik
    • Journal of Korean Society of Forest Science
    • /
    • v.38 no.1
    • /
    • pp.13-18
    • /
    • 1978
  • In this study, enzymatic hydrolysis of the holocellulose from Alnus hirsuta (Spach) Rupr. (8-14 yr's) was investigated using crude cellulase preparations of Trichoderma viride Pers. ex. Fr. SANK 16374. And conducted on the optimum condition of the treated substrate for saccharification. A strain of Trichoderma viride Pers. ex. Fr. SANK 16374 was found to be highly efficient for the cellulase productivity, especially in the submerged culture process. The culture medium used in this experiment was prepared from an extract of wheat bran consisting also of $KH_2PO_410$, $(NH_4)_2$ $SO_4$ 3, $NaNO_3$ 3, and $MgSO_4$ $7H_2O$ 0.5g/l. Cellulose powder (Toyo filter paper, 60 mesh) was found to be an importent factar for inducing the cellulase formation. And the cellulase produced in the culture fluid was salted out quantitatively by the use of ammonium sulfate (Fig. 1) Reducing sugar was determined by the Dinitrosalicylic acid (DNS) method, using reagents prepared according to the method of Sumner (1925). The results obtained were summerized as follows; 1. The method of delignification were treated by the Peracetic acid (PA) method, according to the method of Toyama (1970). The yield of holocellulose were decreased in accordance with increasing concentration of Peracetic acid solution; delignification of Alnus hirsuta Rupr. with 20% Peracetic acid was satisfied for 48 hours and 40%~60% peracetic acid was satisfied for 24 hrs: 2. The substrate (holocellulose) was changed easely into fine powder with enzymatic hydrolysis and cellulase exhibits optimum activity on the reducing sugar formation from substrate at the range of 60-100 mesh. 3. The reducing sugar formation increased in accordance with increasing dry temperature on holocellulose substrate was found to be $190{\pm}5^{\circ}C$. 4. The optimal heat treated time of holocellulose substrate was found to be 45 min. for the reducing sugar formation showed the best products. The reducing sugar formation did not show statisticaly significent diflerences at 5% levels by heat treated time for 45 min. and 60 min.

  • PDF

HPLC Method for Simultaneous Quantitative Detection of Quercetin and Curcuminoids in Traditional Chinese Medicines

  • Ang, Lee Fung;Yam, Mun Fei;Fung, Yvonne Tan Tze;Kiang, Peh Kok;Darwin, Yusrida
    • Journal of Pharmacopuncture
    • /
    • v.17 no.4
    • /
    • pp.36-49
    • /
    • 2014
  • Objectives: Quercetin and curcuminoids are important bioactive compounds found in many herbs. Previously reported high performance liquid chromatography ultraviolet (HPLC-UV) methods for the detection of quercetin and curcuminoids have several disadvantages, including unsatisfactory separation times and lack of validation according the standard guidelines of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use. Methods: A rapid, specific, reversed phase, HPLC-UV method with an isocratic elution of acetonitrile and 2% v/v acetic acid (40% : 60% v/v) (pH 2.6) at a flow rate of 1.3 mL/minutes, a column temperature of $35^{\circ}C$, and ultraviolet (UV) detection at 370 nm was developed. The method was validated and applied to the quantification of different types of market available Chinese medicine extracts, pills and tablets. Results: The method allowed simultaneous determination of quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin in the concentration ranges of $0.00488-200{\mu}g/mL$, $0.625-320{\mu}g/mL$, $0.07813-320{\mu}g/mL$ and $0.03906-320{\mu}g/mL$, respectively. The limits of detection and quantification, respectively, were 0.00488 and $0.03906{\mu}g/mL$ for quercetin, 0.62500 and $2.50000{\mu}g/mL$ for bisdemethoxycurcumin, 0.07813 and $0.31250{\mu}g/mL$ for demethoxycurcumin, and 0.03906 and $0.07813{\mu}g/mL$ for curcumin. The percent relative intra day standard deviation (% RSD) values were $0.432-0.806{\mu}g/mL$, $0.576-0.723{\mu}g/mL$, $0.635-0.752{\mu}g/mL$ and $0.655-0.732{\mu}g/mL$ for quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin, respectively, and those for intra day precision were $0.323-0.968{\mu}g/mL$, $0.805-0.854{\mu}g/mL$, $0.078-0.844{\mu}g/mL$ and $0.275-0.829{\mu}g/mL$, respectively. The intra day accuracies were 99.589%-100.821%, 98.588%-101.084%, 9.289%-100.88%, and 98.292%-101.022% for quercetin, bisdemethoxycurcumin, demethoxycurcumin and curcumin, respectively, and the inter day accuracy were 99.665%-103.06%, 97.669%-103.513%, 99.569%-103.617%, and 97.929%-103.606%, respectively. Conclusion: The method was found to be simple, accurate and precise and is recommended for routine quality control analysis of commercial Chinese medicine products containing the flour flavonoids as their principle components in the extracts.