• 한국전기전자재료학회논문지
• /
• 제14권4호
• /
• pp.274-280
• /
• 2001

This paper presents transconductance (g$\_$m/( characteristics of GaAs MESFET's at high temperatures ranging from room temperature to 350$\^{C}$. GaAs MESFET of 0.3x750[㎛] gate dimension has been used to obtain the experimental data. Gate to source voltage(V$\_$GS/) has been controlled to obtain the temperature dependent characteristics for maximum transconductance g$\_$mmax/ of the device. Furthermore g$\_$mmax/ and expected g$\_$m/ have been traced with temperatures ranging from room temperature to 350$\^{C}$ also by compensating for C$\_$GS/ to maintain the optimum operation of the device. From the results, V$\_$GS/decreases as the operating temperature increases for optimum operation of the transconductance. Finally V$\_$GS/ has been optimized to trace g$\_$mmax/ and enhances the decreased g$\_$m/ with different temperatures.

• 대한전자공학회논문지SD
• /
• 제47권10호
• /
• pp.1-6
• /
• 2010

본 연구에서는 S-파라미터 측정 데이터를 사용하는 RF측정방법으로 short-channel MOSFET의 RF 캐패시턴스 전압(C-V) 곡선을 상온에서 $225^{\circ}C$까지 추출하였으며, 추출된 고온 종속 특성을 엠피리컬하게 모델링하였다. RF C-V 특성곡선의 weak inversion영역에서 온도 변화에 따른 voltage shift가 threshold voltage shift보다 적은 현상이 관찰되었지만, 기존 long-channel C-V 이론 방정식으로 설명할 수 없는 현상임이 입증되었다. 이러한 short-channel C-V 곡선의 고온 종속 모델링을 위해서 새로운 엠피리컬 방정식이 개발되었다. 이 방정식의 정확도는 모델된 C-V곡선과 측정 데이터가 넓은 온도범위에서 잘 일치하는 결과를 관찰함으로써 입증되었다. 또한, 높은 게이트 전압에서는 온도가 증가함에 따라 채널 캐패시턴스 값이 감소하는 것을 확인할 수 있다.

• 한국진공학회지
• /
• 제1권3호
• /
• pp.371-375
• /
• 1992

Low cost, PC controlled electrical property measurement systems were constructed to study thin film characteristics such as ; I-V, C-V, C-t, and low current. In addition, a GPIB card and C language program for data control and analysis were made for this study.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.602-608
• /
• 2009

In this thesis, output voltage, current and power of solar module were classified by irradiation from data of overall operating characteristics collected for one year in order to manage efficient photovoltaic generation system and deliver maximum power. In addition, from these data, correlations between irradiation of photovoltaic cell and amount of power given by photovoltaic cell was quantitatively examined to deduce optimization of the design and construction of photovoltaic generation system. As I-V characteristics according to a temperature range of 10~50[$^{\circ}C$], the area of I-V characteristics were increased with an increase in temperature. Since this area corresponds to the power, output power is thought to have increased with temperature. As output power characteristics according to a temperature range of 10~50[$^{\circ}C$], output power was increased with an increase in temperature. Since output power increases with temperature increase, the result corresponds well to the related equation on temperature and output power. As I-V characteristics according to a irradiation range of 100~900 [$W/m^2$], voltage and current were increased with an increase in irradiation. The result is thought of as an increase in output power with increasing irradiation. As output power characteristics according to a irradiation range of 100~900 [$W/m^2$], output power was increased with increasing irradiation. This result corresponds well to the related equation on irradiation and output power.

• 대한전기학회논문지
• /
• 제43권4호
• /
• pp.607-612
• /
• 1994

The static and dynamic model of IGBT for the SPICE simulation has been successfully developed. The various circuit model parameters are extracted from the I-V and C-V characteristics of IGBT and implemented into our model. The static model of IGBT consists of the MOSFET, bipolar transistor and series resistance. The parameters to be extracted are the threshold voltage of MOSFET, current gain $\beta$ of bipolar transistor, and the series resistance. They can be extracted from the measured I-V characteristics curve. The C-V characteristics between the terminals are very important parameters to determine the turn-on and turn-off waveform. Especially, voltage dependent capacitance are polynomially approximated to obtain the exact turn-on and turn-off waveforms. The SPICE simulation results employing new model agree well with the experimental values.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.136-140
• /
• 1992

The purpose of this research is to develop the lithium secondary battery. This paper describes the preparation, electrochemical properties of nontstoichiometric(NS)-$V_6O_{13}$ and characteristics of Li/$V_6O_{13}$ secondary battery. NS-$V_6O_{13}$ was prepared by thermal decomposition of $NH_4VO_3$ under Ar stream of 140ml/min~180ml/min flow rate. And then, this NS-$V_6O_{13}$ was used for cathode active material. Cathode sheet was prepared by compressing the composite of NS-$V_6O_{13}$, acetylene black(A.B) and teflon emulsion (T.E). Characteristics of the test cell are summarised as follows. Oxidation capacity of NS-$V_6O_{13}$ was about 20% less than its reduction capacity. A part of NS-$V_6O_{13}$ cathode active material showed irreversible reaction in early charge-discharge cycle. This phenomena seems to be caused by irreversible incoporation/discoporation of lithium cation to/from NS-$V_6O_{13}$ host. Discharge characteristics curve of Li/$V_6O_{13}$ cell showed 4 potential plateaus. Charge-discharge capacity was declined in the beginning of cycling and slowly increased in company with increasing of coulombic efficiency. Energy density per weight of $V_6O_{13}$ cathode material was as high as 522Wh/kg~765Wh/kg.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.58-61
• /
• 2001

Metal-insulator-semiconductor (MIS) C-V properties with high dielectric AIN thin films showed no hysteresis and good interface properties. The dielectric constant of the AIN film calculated from the capacitance at the accumulation region in the capacitance-voltage(C-V) characteristics was about 8. The C-V characteristics of MFIS capacitor showed a hysteresis loop due to the ferroelectric nature of the LiNbO$_3$ thin films. Typical dielectric constant value of LiNbO$_3$ film of MFIS device was about 23. The memory window width was about 1.2V at the gate voltage of $\pm$5 V ranges. Typical gate leakage current density of the MFIS structure was the order of 10$^{-9}$ A/cm$^2$ at the range of within $\pm$500 kV/cm. The ferroelectric capacitors showed no polarization degradation up to about 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulse(peak-to-peak 8V, 50% duty cycle) in the 500kHz.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.737-740
• /
• 2010

높은 누설 전류와 문턱 전압의 이동은 비정질 실리콘(a-Si:H) 트랜지스터(TFT)의 단점이다. 이러한 특성은 게이트 절연체와 활성층 박막의 막 특성, 표면 거칠기와 공정 조건에 따라 영향을 받는다. 본 연구의 목적은 누설 전류와 문턱 전압의 특성을 개선하는데 목적이 있다. 게이트 절연체의 공정 조건에 대해서는 질소를 증가한 증착 공정 조건을 적용하였고, 활성층의 공정 조건에 대해서는 산소를 증가한 공정 조건을 적용하여 전자 포획을 감소시키고 박막의 밀도를 증가시켰다. $I_{off}$는 $65^{\circ}C$ 조건하에서 1.01 pA에서 0.18pA로, ${\Delta}V_{th}$는 -1.89 V에서 -1.22V로 개선되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.552-556
• /
• 2002

The microstructure and electrical characteristics of A~C's ZnO varistors fabricated according to variable sintering condition, which sintering temperature is $1130^{\circ}C$ and speeds of pusher are A: 2mm/min, B: 4mm/min, C: 6mm/min, respectively, were investigated. In the microstructure, A~C's ZnO varist-ors fabricated variable sintering condition was consisted of ZnO grain(ZnO), spinel phase$(Zn_{2.33}Sb_{0.67}O_4)$ Bi-rich $phase(Bi_{2}O_{3})$, wholly. Varistor voltage of A~C's ZnO varistors sintered at $1130^{\circ}C$ increased in order A < B < C's ZnO varistors. C's ZnO varistor exhibited good characteristics that nonlinear exponent is 31.70. Leakage current of A~C's ZnO varistors exhibited below 2mA at rated voltage. Lightning impulse residual voltage of A's ZnO varistor suited standard characteristics, which is 3.85kV at 2.5kA, 4.4kV at 5kA and 5.16kV at 10kA. After multi lightning impulse residual voltage test of A's ZnO varistor exhibited good discharge characteristics which ZnO varistor reveals no evidence of puncture, flashover, cracking in visual examination. After high current impulse test of A's ZnO varistor exhibited good discharge characteristics, which variation rate of residual voltage is 0.4% before and after test, and revealed no evidence.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.179-184
• /
• 2000

The I-V characteristics of $ZnO-Pr_6O_{11}-CoO-Dy_2O_3$ based varistors were investigated in the $Pr_6O_{11}/CoO$ composition ratio range of 0.5/0.5 to 1.0/1.0 and sintering temperature range of 1300 to $1350^{\circ}C$ as the basic study to develop the advanced $Pr_6O_{11}$-based ZnO varistors. All varistors except for $Pr_6O_{11}$/CoO = 0.5/1.0 exhibited the best I-V characteristics at $1350^{\circ}C$. However, the varistors with $Pr_6O_{11}$/CoO= 0.5/1.0 exhibited the best I-V characteristics at $1350^{\circ}C$. The varistors with $Pr_6O_{11}$/CoO= 0.5/1.0 of all varistors exhibited the best I-V characteristics, which the nonlinear exponent is 36.9 and the leakage current is 7.6 ${\mu}A$ Therefore, it was estimated that ZnO-$Pr_6O_{11}-CoO-Dy_2O_3$ ceramics with $Pr_6O_{11}$/CoO= 0.5/1.0 will be usefully used as varistor materials in the future.