• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11b
• /
• pp.533-536
• /
• 2003

자바는 썬 마이크로시스템즈사가 개발한 언어로서 현재 가장 널리 사용되는 프로그래밍 언어 중 하나이며, 컴파일러에 의해 플랫폼에 독립적인 바이트코드를 바이너리 형태로 가지고 있는 클래스 파일을 생성하면 JVM에 의해 어떠한 하드웨어나 운영체제에 상관없이 수행이 가능한 플랫폼 독립적인 언어이다. 마이크로소프트사는 .NET 플랫폼을 개발하면서 자바 언어에 대응하기 위해 C# 프로그래밍 언어를 만들었다. C#은 C/C+.의 강력함과 자바나 비주얼 베이직의 높은 생산성을 매우 효과적으로 결합한 프로그래밍 언어이다. C#은 컴파일 과정을 거치면 자바의 바이트코드와 같은 중간 언어인 MSIL코드를 갖는 파일을 출력하게 되는데, C# 이외에도 모든 .NET 언어들은 컴파일과정을 거치면서 MSIL 코드를 얻기 때문에 여러 .NET 언어들을 이용해서 하나의 응용 프로그램을 만들 수 있다. 본 논문에서는 임베디드 시스템에서의 적용을 위해 C#을 컴파일 하여 나오는 중간 언어 형태인 MSIL 코드를 자바의 중간 언어의 한 종류인 Oolong 코드로 변환해 줌으로서 C#으로 구현된 프로그램이 자바 플렛폼에서 JVM에 의해 실행되도록 하는 중간 언어 번역기를 구현하였다.

• Journal of the Chungcheong Mathematical Society
• /
• v.23 no.1
• /
• pp.109-117
• /
• 2010

In this paper, we define the concept of a c-net and study the convergence of c-nets. Also we show that a c-net in a topological space X has a convergent sub-c-net if and only if X is a $Lindel{\ddot{o}}f$ space, if every $G_{\delta}$ set is open in X.

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.194-205
• /
• 1989

In order to study the biomass of primary producer, phytoplankton is collected monthly September 1985 to August 1986 in Ch$\check{o}$nsu Bay. Phytoplankton carbon contents which are calculated from phytoplankton volume were ranged from $26.7{\mu}gC/l$ to $960.7{\mu}gC/l$, and average carbon contents of each month lie in the range of $58.6-684.7{\mu}gC/l$(annual mean $208.5{\mu}gC/l$). For net plankton analysis with the carbon contents, cell numbers, and chlorophyll concentrations show a close correlation, while for nanoplankton the correlation was low, indicating that nano-fraction includes a significant portion of picoplankton. Also, the multiple regression analysis with carbon content, cell number, and chlorophyll concentration to size fraction well illustrate the prime importance of the net-fraction in phytoplankton group. C/Chl-a ratios ranged from 9.1 to 100.5, average rations of net- and nanoplankton are 111 and 6.4, respectively. The greater net plankton faction is, the higher C/Chl-a ratio is, however in case of high nanoplankton portion C/Chl-a ratio show low level. These results indicate that the difference of C/Chl-a ratio per phytoplankton cell size be main factor for the variation of C/Chl-a ratio in Ch$\check{o}$nsu Bay. As C/Chl-a ratio fluctuates greatly in coastal ecosystem, that use of a direct conversion of convert chlorophyll to organic carbon may lead erronous estimation.

• Wind and Structures
• /
• v.30 no.3
• /
• pp.219-229
• /
• 2020

Net pressures on roofs and walls of buildings are dependent on the internal and external pressure fluctuations. The variation of internal and external pressures are influenced by the size and location of the openings. The correlation of external and internal pressure influences the net pressures acting on cladding on different parts of the roof and walls. The peak internal and peak external pressures do not occur simultaneously, therefore, a reduction can be applied to the peak internal and external pressures to obtain a peak net pressure for cladding design. A 1:200 scale wind tunnel model study was conducted to determine the correlations of external and internal pressures and effective reduction to net pressures (i.e., net pressure factors, F_C) for roof and wall cladding. The results show that external and internal pressures on the windward roof and wall edges are well correlated. The largest ${\mathcal{C}}_{{\check{p},net}$, highest correlation coefficient and the highest F_C are obtained for different wind directions within 90° ≤ θ ≤ 135°, where the large openings are on the windward wall. The study also gives net pressure factors F_C for areas on the roof and wall cladding for nominally sealed buildings and the buildings with a large windward wall opening. These factors indicate that a 5% to 10% reduction to the action combination factor, K_C specified in AS/NZS 1170.2(2011) is possible for some critical design scenarios.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.976-984
• /
• 2004

C# and .NET platform in Microsoft Corp. has been developed to meet the needs of programmers, and cope with Java and JVM platform of Sun Microsystems. After compiling, a program written in .NET language is converted to MSIL code, and also executed by .NET platform but not in JVM platform. Java, one of the most widely used programming languages recently, is the language invented by James Gosling at Sun Microsystems, which is the next generation language independent of operating systems and hardware platforms. Java source code is compiled into bytecode as intermediate code independent of each platform by compiler, and also executed by JVM. This paper presents the MSIL-to-Bytecode intermediate language translator which enables the execution of the program written in .NET language such as C or C# in JVM(Java Virtual Machine) environment, translating MSIL code produced by compiling .NET program into java bytecode. This work provides an environment for programmers to develop application programs without limitations of programming languages.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.20-28
• /
• 2012

The monofilament with 0.304mm of diameter was produced using a polybutylene succinate (PBS) resin, and a gill net was made by it. We investigated the impact of heat setting temperature on the mechanical properties, knot state and height of gill net. Heat treatment was carried out using the high pressure steam machine for 20 minutes at temperature of $55^{\circ}C$, $60^{\circ}C$, $70^{\circ}C$ and $75^{\circ}C$. Before heat treatment, the strength and elongation of PBS monofilament were estimated to be $48.1kg/mm^2$, 23.8% at unknot, $37.6kg/mm^2$, 18.8% at single knot, $26.6kg/mm^2$, 22.9% at double knot in dry condition, respectively. The strength and elongation of PBS monofilament with double knot were decreased as heat setting temperature increased, and the decreasing rate of strength was showed to be higher than that of elongation. It was not found any differences in strength and elongation of PBS monofilament yarn with double knot at the $65^{\circ}C$ and $70^{\circ}C$ of heat setting temperature by 5% significance of T-test, but there was a significant difference at the $70^{\circ}C$ and $75^{\circ}C$ of heat setting temperature. The net's height and length from leg to leg appeared no differences at the $70^{\circ}C$ and $75^{\circ}C$ of heat setting temperature. In results, it was investigated that the PBS monofilament gill net with the maximized physical properties could be manufactured at $70^{\circ}C$ of heat setting temperature using a high pressure steam machine for 20 minutes.

• Korean Journal of Plant Resources
• /
• v.8 no.2
• /
• pp.195-199
• /
• 1995

This study was conducted to investigate the Net photosynthesis and respiration rates among the varieties of Soybean(Eunha, Pangsa and Paldal that have high yields) at various leaf temperature and light intensity at the stage of $V_5$. The relations between the Net photosynthesis rate and SLW(specific leaf weight) and chlorophyll content were also investigated. 1. Net photosynthesis rates at $25^{\circ}C$ were $21.5mgdm^{-2}h^{-1}$ in cv. Eunha, $20.2mgdm^{-2}h^{-1}$ in cv. Pangsa and $18.5mgdm^{-2}h^{-1}$ in cv. Paldal. 2. Most cultivars of Soybean showed the maximum rates of Net photosynthesis at $25^{\circ}C$, especially in cv. Eunha. Also Net photosynthesis rates differed depending on the leaf shape. Long leaf shape(cv. Eunha) was better than round leaf shape(cv. Paldal) in Net photosynthesis rate. 3. Respiration rates of leaves in Eunha, Pangse and Paldal were $0.56mgdm^{-2}h^{-1}$ at $15^{\circ}C$, $0.79mgdm^{-2}h^{-1}$ at $20^{\circ}C$ $1.15mgdm^{-2}h^{-1}$ at $25^{\circ}C$ and $1.37mgdm^{-2}h^{-1}$ at $30^{\circ}C$. 4. Specific leaf weight were $3.1mg/cm^2$ in Pangsa, $3.5mg/cm^2$ in Eunha and Paldal. No signlficant difference were showed in net photosynthesis rates and specific lear weight. 5. Leaf chlorophyll content were $2.48{\mu}g/gF.W.$ in Eunha, $2.19{\mu}g/gF.W.$ in Pangsa and $1.67{\mu}/g F.W.$ in Paldal. Significant difference were showed in Net photosynthesis rates and Leaf chlorophyll content. 6. The estimated compensation points at which net photosynthesis approached zero were $10{\mu}Em^{-2}s^{-1}$ in Eunha, Pangsa, and Palda at 1$5^{\circ}C$. The compensation point in cv. Eunha at $20^{\circ}C$ was $12P{\mu}Em^{-2}s{-1}$ while $13{\mu}Em^{-2}s{-1}$ in Pangsa and Palda. The compensation point in cv. Paldal at $25^{\circ}C$ was $18{\mu}Em^{-2}s{-1}$ while $16{\mu}Em^{-2}s{-1}$ in Eunha and Pangsa. The compensation point in cv. Palda at $30^{\circ}C$ was $23{\mu}Em^{-2}s{-1}$ Palda while $13{\mu}Em^{-2}s{-1}$ in Eunha and Pangsa.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.17-26
• /
• 2005

There are several problems in the commercial pound net in the heavy tide ; the breaking and loss of net, steeply variation of net shape and decreasing of fishing efficiency, etc. In order to solve these problems, we introduced method of added sinker used to coastal cultivating cage of Japan and investigated the possibility of application to the Korean pound net. The results are obtained as follows; 1. In case of the upperward flow with fish court net, tension of the frame line was increased about 10${\sim}$25% than that of prototype according to the added sinker from 1.3gf to 5.2gf. The tension of A-type and B-type was similar to the case of the prototype, the tension of C-type and D-type was increased about 10${\sim}$15% than that of prototype. 2. The variation of deformed angle of fish court net was from 0$^{\circ}$ to 70$^{\circ}$ and that of the slope net was from 0$^{\circ}$ to 64$^{\circ}$ and that of the second bag net was from 0$^{\circ}$ to 46$^{\circ}$ and the depth of the second bag net was increased about 10% when the added sinker was changed from 1.3gf to 5.2gf. The depth of the first bag net and the second bag net were decreased about 50% than that of initial depth. 3. For the deformed angle of fish court net according to the attached point of the added sinker, A-type and B-type were decreased about 25% and 10% than the prototype, respectively. C-type was similar to the case of the prototype and D-type was increased about 15% than that of the prototype. The depth of slope net became deep in turn of A-type, B-type, C-type and D-type. For the depth of the second bag net, A-type, B-type, C-type and D-type were increased about 10${\sim}$15% than that of prototype. The depth of the slope net was changed from 0$^{\circ}$ to 63$^{\circ}$ and that of the second bag net was changed from 0${\sim}$44$^{\circ}$ according to the increase of velocity. 4. The optimal weight of added sinker was about 2.6${\sim}$3.6gf and the optimal attached point of added sinker was the case of C-type and D-type.

• Journal of Environmental Science International
• /
• v.12 no.8
• /
• pp.841-846
• /
• 2003

The ecosystem model was applied to estimate the regional distribution of the net production(or consumption) of phytoplankton and the net uptake(or regeneration) rate of nutrients in Masan Bay for scenario analysis to find a proper management plan. At the surface level, net production of phytoplankton is 200 mgC/㎡/day at the entrance of the bay, and 400∼1000 mgC/㎡/day at the center of the bay. The inner area of the bay showed more than 2000 mgC/㎡/day. All areas of the bottom level have a net consumption, with the center of the bottom level showing more than 600 mgC/㎡/day. For dissolved inorganic nitrogen, the results showed a net uptake rate of 100∼900 mg/㎡/day at the surface level. It showed that the net regeneration is above 50 mg/㎡/day at the bottom level. For dissolved inorganic phosphorus, the net uptake rate showed 10.0∼80.0 mg/㎡/day at the surface level, and the regeneration rate showed 0∼20.5 mg/㎡/day at the bottom level. Therefore, in order to control the water quality in Masan Bay, it is important to consider the re-supplement of nutrients regenerated in the water column.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.140-161
• /
• 2022

Seismic data with missing traces are often obtained regularly or irregularly due to environmental and economic constraints in their acquisition. Accordingly, seismic data interpolation is an essential step in seismic data processing. Recently, research activity on machine learning-based seismic data interpolation has been flourishing. In particular, convolutional neural network (CNN) and generative adversarial network (GAN), which are widely used algorithms for super-resolution problem solving in the image processing field, are also used for seismic data interpolation. In this study, CNN-based algorithm, U-Net and GAN-based algorithm, and conditional Wasserstein GAN (cWGAN) were used as seismic data interpolation methods. The results and performances of the methods were evaluated thoroughly to find an optimal interpolation method, which reconstructs with high accuracy missing seismic data. The work process for model training and performance evaluation was divided into two cases (i.e., Cases I and II). In Case I, we trained the model using only the regularly sampled data with 50% missing traces. We evaluated the model performance by applying the trained model to a total of six different test datasets, which consisted of a combination of regular, irregular, and sampling ratios. In Case II, six different models were generated using the training datasets sampled in the same way as the six test datasets. The models were applied to the same test datasets used in Case I to compare the results. We found that cWGAN showed better prediction performance than U-Net with higher PSNR and SSIM. However, cWGAN generated additional noise to the prediction results; thus, an ensemble technique was performed to remove the noise and improve the accuracy. The cWGAN ensemble model removed successfully the noise and showed improved PSNR and SSIM compared with existing individual models.