• 제목/요약/키워드: C rate

검색결과 19,598건 처리시간 0.186초

증착 온도 및 수소 유량에 따른 IGZO 박막의 구조적 및 전기적 특성 (Structural and Electrical Characteristics of IGZO Thin Films Deposited at Different Substrate Temperature and Hydrogen Flow Rate)

  • 박수진;이규만
    • 반도체디스플레이기술학회지
    • /
    • 제15권4호
    • /
    • pp.46-50
    • /
    • 2016
  • In this study, we have investigated the effect of the substrate temperature and hydrogen flow rate on the characteristics of IGZO thin films for the TCO(transparent conducting oxide). For this purpose, IGZO thin films were deposited by RF magnetron sputtering at room temperature and $300^{\circ}C$ with various $H_2$ flow rate. In order to investigate the influences of the hydrogen, the flow rate of hydrogen in argon mixing gas has been changed from 0.1sccm to 1.0sccm. IGZO thin films deposited at room temperature show amorphous structure, whereas IGZO thin films deposited at $300^{\circ}C$ show crystalline structure having an (222) preferential orientation. The electrical resistivity of the amorphous-IGZO films deposited at R.T. was lower than that of the crystalline-IGZO thin films deposited at $300^{\circ}C$. The increase of electrical resistivity with increasing substrate temperature was interpreted in terms of the decrease of the charge carrier mobility. The transmittance of the IGZO films deposited at $300^{\circ}C$ was decreased deposited with hydrogen gas.

Some articulatory reflexes observed in intervocalic consonantal sequences: Evidence from Korean place assimilation

  • Son, Minjung
    • 말소리와 음성과학
    • /
    • 제12권2호
    • /
    • pp.17-27
    • /
    • 2020
  • This paper examines kinematic characteristics of /pk/ clusters, as compared to /kk/ and /pp/ with varying vowel contexts and speech rate. The results of EMMA data from eight Seoul-Korean speakers indicate as follows. Firstly, comparing /pk/ to /pp/ sequences, lips closing movement was faster and spatially greater in the /a/-to-/a/ context while temporally longer in the /i/-to-/i/ context. It was smaller in spatial displacement and shorter in temporal duration in /pk/ sequences. Peak velocity did not vary. Secondly, comparing /pk/ with /pp/ and /kk/ controls, lip aperture was less constricted in the /a/-to-/a/ context than /i/-to-/i/, but the maximum contact between the upper and lower lips was invariant across different vocalic contexts within /pk/ sequences (/apka/=/ipki/). Categorical reduction of C1 in /pk/ sequences fell in with the low-vowel and fast-rate conditions with across-/within-speaker variability. Gradient reduction of C1 was observed in all C1C2 types, being more frequent in fast rate. Lastly, the jaw articulator was a stable indicator of rate effects. The implication of the current study is that gestural reduction occurs with categorical reduction and general spatiotemporal weakening in the assimilating contexts, while quantitative properties of gestures may be a reason for gradient reduction, not necessarily confined to place assimilation.

RF 스퍼터를 이용하여 ZnO 증착 시 기판의 냉각율이 박막의 c-축 배향성에 미치는 영향 (Effects of Cooling Rate of Pre-heated Substrate on C-Axis Orientation of ZnO Prepared by RF Sputter Deposition)

  • 박성현;이능헌
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제55권12호
    • /
    • pp.560-564
    • /
    • 2006
  • ZnO thin films were prepared by RF magnetron sputter deposition on p-Si(100) wafer with various cooling rates of substrate temperature such as the substrates were pre-heated to $400^{\circ}C$ before the deposition and then cooled down naturally or slowly to $300^{\circ}C,\;200^{\circ}C,\;100^{\circ}C$, and R.T. by the temperature controller during the deposition. Crystalline and micro-structural characteristics of the films were investigated by XRD and SEM. ZnO films which cooled down naturally or slowly by the temperature controller during the deposition, especially the film were deposited with cooling down from $400^{\circ}C\;to\;200^{\circ}C$ slowly. showed the most outstanding c-axis preferred orientation.

쌀 알칼리붕괴반응의 품종간 변이와 호화온도 및 수분흡수율과의 관계 (Varietal Variation of Alkali Digestion Value and Its Relationship with Gelatinization Temperature and Water Absorption Rate of Milled Rice Grain)

  • 김광호;오세만
    • 한국작물학회지
    • /
    • 제37권1호
    • /
    • pp.28-36
    • /
    • 1992
  • 쌀알의 알칼리붕괴도와 호화온도 및 수분흡수율간의 관계를 밝히기 위하여 50품종의 쌀을 이용하여 4농도의 알칼리용액에서 쌀알의 붕괴반응을 조사하였으며 알칼리붕괴반응에 근거하여 선발한 24품종에 대하여는 알칼리용액에서의 침지시간에 따른 쌀알의 붕괴정도, 가열온도 및 시간에 따른 쌀알의 완전호화율 그리고 21$^{\circ}C$ 및 77$^{\circ}C$의 물에 쌀을 침지했을 때의 흡수율 등을 조사하였다. 1. 자포니카형 및 통일형품종들의 알칼리붕괴도의 차이는 KOH 1.2%농도에서 가장 확실히 나타났지만 각 품종의 알칼리붕괴반응을 정확히 알기위해서는 KOH 1.2% 및 1.4%에서 쌀알의 붕괴도를 검정하는 것이 좋았다. 2. 4개수준의 알칼리농도에서 조사한 붕괴도에 근거하여 공시품종을 3품종군으로 나눌 수 있었는데 알칼리용액에 쌀알을 침지한 후 경과시간에 따른 붕괴반응에도 품종간 차이가 있었다. 3. 알칼리 붕괴반응이 크게 다른 품종군간에는 가열온도 및 시간에 따른 호화립비율의 차이가 분명하여 알칼리붕괴도가 낮은 품종의 쌀이 높은 쌀에 비하여 완전호화에 필요한 온도가 높았고 호화소요시간도 길었으나 동일한 품종군내에서도 품종간 차이가 있었다. 4. 알칼리붕괴도가 아주 낮았던 품종군의 쌀은 알칼리붕괴도가 중간 또는 높은 품종군에 비하여 상온(21$^{\circ}C$) 및 가열(77$^{\circ}C$)흡수율이 아주 낮았고 알칼리붕괴도가 중간인 품종군은 높은 품종군에 비하여 상온에서의 초기 수분흡수속도가 느렸다.

  • PDF

Comparative Studies on Metabolic Rate and Calpain/Calpastatin Activity between Hanwoo and Holstein Beef

  • Rhee, M.S.;Ryu, Y.C.;Kim, B.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권12호
    • /
    • pp.1747-1753
    • /
    • 2002
  • The objectives of this study were to examine the effect of early short-term temperature conditioning on metabolic rate and calpain/calpastatin system and to compare variations in metabolic rate and calpain/calpastatin system between Hanwoo and Holstein beef. Longissimus thoracis et lumborum of the right carcass from 3 Hanwoo and 3 Holstein bulls were removed within 30 min of exsanguinations, cut into three pieces, and then temperature conditioned until 3 h postmortem (PM) at 2, 16, and $30^{\circ}C$, respectively. Rigor values (R-values; $R_248$, $R_250$, and $R_258$), pH, muscle temperature, glycogen content, $\mu$- and m-calpain activities, and calpastatin acitivity were measured at 1, 3, 9, and 24 h PM, respectively. Hanwoo beef had higher muscle temperature, faster metabolic rate at early PM stage in R-values, and lower $\mu$-calpain activity than Holstein beef (p<0.05). The $30^{\circ}C$ treatment maintained muscle temperature of $30^{\circ}C$ until 3 h PM and resulted in faster pH decline at 3 and 9 h PM (p<0.05) than other treatments. The $16^{\circ}C$ had higher (p<0.05) muscle temperature at 3 h PM than the $2^{\circ}C$, but no difference in all other traits was observed between the $2^{\circ}C$ and the $16^{\circ}C$. Early shortterm temperature treatment used in this study was not sufficient to effectively activate calpain/calpastatin system. Correlations among all traits except m-calpain and muscle temperature were generally high (r>0.60; p<0.001). Among R-values, $R_258$ had higher correlations with other metabolic traits than those of $R_248$ and $R_250$. These data suggest that early PM metabolic rate, $\mu$-calpain activity, and calpastatin activity may be closely related to each other. Variations in metabolic rate and $\mu$-calpain activity at early PM stage between Hanwoo and Holstein beef may imply variations in meat quality between both breeds.

수온에 따른 지중해담치 (Mytilus galloprovincialis; Bivalvia) 의 여과율과 섭식율 변동 (The Influence of Water Temperature on Filtration Rates and Ingestion Rates of the Blue Mussel, Mytilus galloprovincialis (Bivalvia))

  • 이서이;신현출
    • 한국패류학회지
    • /
    • 제31권3호
    • /
    • pp.203-212
    • /
    • 2015
  • 본 연구는 먹이생물의 종류와 서식 위치 (패각 크기)에 따라서 지중해담치의 여과율이 수온에 따라 어떻게 변동하는 지를 알아보고자 하였다. 실험에 사용된 먹이생물은 Isochrysis galbana, Chaetoceros didymus and Prorocentrum dentatum의 3 종류이다. 지중해담치의 크기 (각고)는 중부조간대 상부 지역 (+ 5 cm MSL)에 서식하는 개체가 중부조간대 하부지역 (- 58 cm MSL)에 서식하는 개체보다 월등히 작았다. 지중해담치의 여수율과 섭식율은 먹이생물의 종류에 상관없이 중부조간대 상부에 서식하는 지중해담치가 중부조간대 하부에 서식하는 지중해담치보다 높은 값을 보였다. 전반적으로 수온에 따른 여수율과 섭식율 변동은 동일한 변동 양상을 보였다. 즉 수온이 상승함에 따라서 여수율과 섭식율도 증가하다가, 수온 $20-25^{\circ}C$ 정도에서 최대값을 보이며, 이 후 점차 감소하는 경향을 보였다. 다항회귀분석식에서 추정한 최대 여수율과 섭식율을 보이는 이론적 적정 수온 역시 $20-25^{\circ}C$의 범위내로 나타났다. 먹이생물의 종류에 따라서는 여수율과 섭식율이 약간 다른 변동을 보였다. 대체적으로 여수율과 세포수 기준 섭식율은 지중해담치의 서식위치 (조고)나 먹이생물의 종류에 상관없이 거의 유사한 경향을 보였다. 반면에 탄소함량 기준 섭식율의 경우 먹이생물이 P. dentatum일 경우가 I. galbana나 C. didymus일 경우 보다 월등히 높은 값을 보였다.

현삼 및 섬현삼 종자의 저장조건에 따른 발아특성 연구 (Effect of Storage Condition on the Germination of Scrophularia buergeriana and Scrophularia takesimensis)

  • 이정훈;안찬훈;이윤지;김성철;정찬식;김성민
    • 한국약용작물학회지
    • /
    • 제24권5호
    • /
    • pp.393-400
    • /
    • 2016
  • Background: This study was conducted to investigate the effects of germination temperature, storage container and storage temperature on Scrophularia buergeriana and Scrophularia takesimensis seeds. Methods and Results: Seed lengths of both species were 0.8 mm, while seed width differed, with S. buergeriana measuring 0.5 mm and S. takesimensis measuring 0.4 mm. The seeds of S. buergeriana were packaged in paper containers under room temperature ($15^{\circ}C$), cold temperature ($4^{\circ}C$), and freeze temperature ($-20^{\circ}C$). These seeds exhibited around 80% germination rate at temperatures between $15^{\circ}C$ and $30^{\circ}C$. The germiantion rate of S. takesimensis, on the other hand, differed significantly at different germination temperatures. Seeds of S. takesimensis which were packaged in vinyl and paper containers and stored under room and cold temperatures, exhibited around 80% germination rate at $15^{\circ}C$. However, the germination rate of freeze-stored seeds were decreased to lower than 20% at germination temperatures of $15^{\circ}C$, $25^{\circ}C$ and $30^{\circ}C$ germiantion conditions. The rate of germination showed a low positive to a significantly negativie correlation with the other factor that were determined to evaluate the germination performance. Conclusions: This study elucidates the most suitable germination and storage conditions to increase the germination rate for the two species of Scrophularia buergeriana and Scrophularia takesimensis needs to be stored in paper containers under cold temperature and requires a temperature of $20^{\circ}C$ for germination. On the other hand, S. takesimensis in vinyl containers need to be stored at room temperature and those in paper containers at cold temperature, and a temperature of $15^{\circ}C$ is required for germination.

부산 콘테이너 부두의 하역료에 관한 연구 - 공영기업 차원의 요금산정을 중심으로 - (A Study on the Container Charges of Pusan Container Terminal)

  • Lee, Cheol-Yeong;Lee, Kwang-Hee
    • 한국항만학회지
    • /
    • 제3권1호
    • /
    • pp.3-33
    • /
    • 1989
  • The amount of the Korean export & import in 1987 reached $88.3 billion which was 1.75% of the total world trade and the proportion of foreign dependence to G.N.P was 74.5%. From these facts, we can infer that the development of national economy is largely dependent upon trade. Therefore the role of transportation, especially Ocean transportation, as a basis of economic development through trade is one of the main factors that can not be passed over. Here, We can define that a port as a subsystem of transportation determines the efficiency of the total transportation system. Thus, the purpose of this paper is to contribute in improvement of the efficiency in port, reinforcement of the international competitiveness for exporting goods by the analysis of the cargo handling charges. In order to do this, this paper deals the case of B.C.T.O.C. Furthermore, this study gives some important informations related to the level of tariffs for establishing an autonomous port administration. The Summary of the conclusions of this paper is as follows ; 1) The object of port administration in Korea has been emphasized on the maximization of efficiency in using the port facilities. Nowadays, however, it should be moved to a direction that port is operated under the compound aims considering the public interests and economy. 2) For a criterian of tariff calculation, A tariff system based on the cost accounting is desirable. In general it is recommended that the cost for construction, management, and operation of port is compensated by the revenue from port operation. Therefore, it is necessary for the administration bodies of each port to establish a tariff system on the basis of the independent profit system. 3) For the investigation of actors of tariff adjustment by the Break-even point analysis, (1) When we conducted the B.E.P analysis using total cost as cost term, we got 3.8% discount in tariff at 12% of target profit rate and 1.5% discount at 15% of rate. when we set the target profit rate as 17% we could have the proper tariff level. (2) When using operating cost as cost term, we got 13.1% discount in tariff at 12% of target profit rate and 10.9% discount at 15% of rate. When setting the target profit rat as 28%, we could have the proper tariff level. 4) Comparing with the tariffs of foreign ports for the basic terminal rate, The tariff level of B.C.T.O.C showed 33% of stevedoring charge and 80% of marshalling charge incurred at Kobe port. The comparison with Singapore port gave 50% of transhipment charge and 17% - 20 % of stevedoring charge. 5) We found that the financial structure of B.C.T.O.C was better than those of other companies and the worth fixed assets ratio was too low. The fact of low worth fixed assets ratio implies that the cargo handling facilities should be increased. Moreover, The return of assets for B.T.T.O.C was good but non-operating expenses were still contained too much in. Therefore, we think that it is necessary for B.C.T.O.C. to rationalize business management. Although the present cargo handing charge for B.C.T.O.C is a proper level in terms of a public corporation, for the final recommendation in connection to the results, It is required to take the rationalization process for business management.

  • PDF

새만금호의 수질예측과 그에 따른 대책 3. 환경오염이 담수산 미세조류, Cryptomonas ovata의 증식과 참재첩(Corbicula leana) 섭이율에 미치는 영향 (Prediction of Water Quality and Water Treatment in Saemankeum Lake 3. Effects of Environmental Pollutants on Propagation of Freshwater Microalgae, Cryptomonas ovata and Feeding Rate of Corbicula leana)

  • 최문술;정의영;신윤경
    • 한국패류학회지
    • /
    • 제14권2호
    • /
    • pp.167-172
    • /
    • 1998
  • As a preliminary study, effects of environmetal pollutants on propagation of freshwater microalgae, Cryptomonas ovata and feeding rate of Corbicula leana were investigated at 20${\pm}$1$^{\circ}C$, over 20 days after treatment of pollutants, glucose, complex fertilizer and NH4Cl. Number of C. ovata in control group was increased from 38${\times}$104 cell/ml to 1.910${\times}$104 cell/ml after 20 days cultivation in Sorokin-Krauss medium. Increments of cell number in experimental groups treated with glucose, complex fertilizer and NH4Cl were higher than that of control group. The higher propagation rate of C.ovata was observed when 30 mg/l of glucose treated, 120 mg/l of complex fertilizer treated, and 4 mg/l of NH4Cl treated, compared with other concentrations in each pollutant treated group. The feeding rates of large size group of C. leana which fed with a living organism, C. ovata in each experimental group were higher than small size group, and slightly reduced with the increase of pollutant concentrations. The feeding rates were not significantly different between any concentrations of the pollutant, and among experimental groups treated with glucose, complex fertilizer and NH4Cl.

  • PDF

보일러 배관용 P92 파이프강의 기계적 특성 및 미세조직에 관한 연구 (A Study on the Mechanical Property and Microstructure of SA213 P92 Boiler Pipe Steel)

  • 김범수;손태하;민택기
    • 설비공학논문집
    • /
    • 제24권11호
    • /
    • pp.777-783
    • /
    • 2012
  • The hardness and strength test was performed to make the manufacturing process of SA213 P92 boiler pipe steel. And the microstructure change was studied to find out the cause of room temperature property of P92 steel, ie, low hardness and strength property. The room temperature property of P92 steel depends on the improper normalizing and cooling rate. Especially, Ferrite was formed and the steel had low hardness when the temperature was decreased slowly under the cooling rate $1^{\circ}C$/min after normalizing at the temperature around $A_{c1}$ to $A_{c3}$. The critical heat treatment temperature and cooling rate was over $900^{\circ}C$ and over $10^{\circ}C$/min to satisfy the minimum yield and tensile stress which was laid down by ASME Code.