• Journal of the East Asian Society of Dietary Life
• /
• v.3 no.2
• /
• pp.107-119
• /
• 1993

The objeative of this study was to investigate the possibility of estimation of internal quality by observing visible state of strawberry. Several tests such as color("L", "A", H,V,C), degree of blackred ness, opening state of calyx, vitamin C content, brix degree, acidity, freshness, overall quality, chlorophyll content, and anthocyanin content were performend during circulation at 20$^{\circ}C$. Acidity(R=-0.96), chloroph-yll content(r=-0.99), vitamin C content(r=-0.98), freshness(r=-0.96), and overall quality(-0.99), degree of blackredness(r=0.98) and opening state of calyx(=0.98), color saturation(r=0.99), degree of blackredness(r=0.98) and opening state of calyx(=0.98) increased during circulation at 20$^{\circ}C$. in correlation between visible indicators andd internal qualities, "L" valu and brix degree was r=-0.74, "a" and brix degree was r=0.93 Hue and anthocyanin content was r=0.74, value and chlorophyll content, brix degree were r=-0.91, r=-0.77, chroma and brix degree was r=0.96. The correlations between color saturation and vitamin C content(r=-0.96), chlorophyll content(r=-0.98), freshness(r=-0.98), overall quality(r=-0.94), loss of total polyphenol(0.94) and acidity(r=-0.94) showed high correlation. The correlatiions between degree of blackrednes and vitamin C content(r=-0.99), chlorophyll content(r=-0.94), anthocyanin content(=-0.74), freshness(r=-0.97) overall quality (r=-0.95), loss of total polyphenol(r=0.93) and acidity(r=-0.91) chlorophyll content(r=-0.99), freshness(r=-0.98), overall quality(r=-0.92), loss of total polyphenol(r=0.99) and acidity(r=0.83) showed high correlation.

• Journal of Yeungnam Medical Science
• /
• v.14 no.1
• /
• pp.67-76
• /
• 1997

The occurrence of multidrug resistance (MDR) is one of the main obstacles in the successful chemotherapeutic treatment of cancer. In this study The gene expressions of multidrug resistance-associated protein (MRP), c-myc and c-fos were investigated in L1210 cells. Adriamycin- or vincristine-resistant L1210 cells, L1210AdR or L1210VcR, respectively, has been identified to overexpression of mdr1 gene. The expression leve of MRP gene in L1210AdR and L1210Cis was more decreased than that in L1210 cells. The c-myc and c-fos genes were expressed both in L1210 and resistant sublines. In L1210AdR, the expressions level of c-myc and c-fos genes were decreased than in L1210. However, in L1210VcR and L1210Cis, c-myc and c-fosgene expressionwere rather increased than L1210. These results suggested that MRP does not contribute in resistance of drug-resistant L1210 cells and there is no relations between MRP and mdr1 gene expression. The expression of c-myc and c-fos gene may be changed during transformation of L1210 to drug-resistant sublines.

• Textile Coloration and Finishing
• /
• v.19 no.3
• /
• pp.18-25
• /
• 2007

The fixing behaviors of anthraquinone disperse dyes containing dimethylamino substituent, such as C. I. Disperse Violet 26(D.V.26) and C. I. Disperse Blue 14(D.V.14), or containing diamino substituent, such as C. I. Disperse Blue 73(D.B.73), and monochlorotriazinyl azo reactive dyes, such as C. I. Reactive Orange 13(R.O.13), C. I. Reactive Red 3(R.R.3). C. I. Reactive Yellow 2(R.Y.2) on polyester/cotton blend(P/C) fabrics were examined for the one-step printing of P/C fabrics. The high temperature steaming of $175^{\circ}C$ is the most satisfactory fixing method for P/C one-step printing with above disperse and reactive dyes among the four different fixing methods: $175^{\circ}C$ steaming, $102^{\circ}C$ steaming${\rightarrow}175^{\circ}C$ steaming, $190^{\circ}C$ thermosol, $102^{\circ}C$ steaming${\rightarrow}190^{\circ}C$ thermosol. $190^{\circ}C$ thermosol is unfit to fix R.R.3 and R.Y.2 whose heat stability is poor. It was found that D.V.26 and D.B.14 containing dimethylamino substituent are unstable for heat and alkali, but D.B.73 is stable for them to print P/C blend fabrics with R.O.13 which is also stable for heat. Therefore we found that D.B.73, R.O.13 and a pair of D.B.73 and R.O.13 were very suitable for one-step printing of P/C blend fabrics.

• Geomechanics and Engineering
• /
• v.23 no.2
• /
• pp.115-125
• /
• 2020

This study aims to explore practical and useful equations for rapid evaluation of uniaxial compressive strength of concrete (UCS-C) during the preliminary design stage of aggregate selection. For this purpose, aggregates which were produced from eight different intact rocks were used in the production of concretes. Laboratory experiments involved the tests for uniaxial compressive strength (UCS-R), point load index (PLI-R), P wave velocity (UPV-R), apparent porosity (n-R), unit weight (UW-R) and aggregate impact value (AIV-R) of the rock samples. UCS-C, point load index (PLI-C) and P wave velocity (UPV-C) of concrete samples were also determined. Relationships between UCS-R-rock parameters and UCS-C-concrete parameters were developed by regression analyses. In the simple regression analyses, PLI-C, UPV-C, UCS-R, PLI-R, and UPV-R were found to be statistically significant independent variables to estimate the UCS-C. However, higher coefficients of determination (R²=0.97-1.0) were obtained by multiple regression analyses. The results of simple regression analysis were also compared to the limited number of previous studies. The strength conversion factor (k) values were found to be 14.3 and 14.7 for concrete and rock samples, respectively. It is concluded that the UCS-C can roughly be estimated from derived equations only for the specified rock types.

• Journal of the Korean Institute of Gas
• /
• v.12 no.3
• /
• pp.43-49
• /
• 2008

The evaporation heat transfer coefficient and pressure drop of R-22 and R-407C in horizontal copper tubes were investigated experimentally. The main components of therefrigerant loop are a receiver, a compressor, a mass flow meter, a condenser and a double pipe type evaporator (test section). The test section consists of a smooth copper tube of 4.3 mm and 6.4 mm inner diameter. The refrigerant mass fluxes were varied from 100 to $300[kg/m^2s]$ and the saturation temperature of evaporator were 5 [$^{\circ}C$]. The evaporation heat transfer coefficients of R-22 and R-407C rise with the increase in mass flux and vapor quality. The evaporation heat transfer coefficient of R-22 for inner diameter tube of 4.3 mm and 6.4 mm is about $7.3{\sim}47.1%$ and $5.68{\sim}46.6%$ higher than that of R-407C, respectively.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.934-941
• /
• 1997

C $r_{3}$ $C_{2}$-20wt% NiCr 이 크래드된 분말을 이용하여 HVOF 용사층의 특성(미세조직, 결정상, 경도 그리고 erosion rate)에 미치는 연료/산소 비(=3.2,3.0,2.8,2.6)의 영향을 조사했다. 실험범위 내에서 F/O=3.0의 경우가 C $r_{3}$ $C_{2}$-20wt%(NiCr)크래드 분말의 최적용사조건 이었다. XRD분석결과 F/O비에 관계없이 카바이드분해는 일어 났다. C $r_{3}$ $C_{2}$에서C $r_{7}$ $C_{3}$로의 상변화는 F/O비가 감소함에 따라 증가했다. 열처리 온도가 높아짐에 따라 C $r_{7}$ $C_{3}$분율은 증가 하였으며, 100$0^{\circ}C$에서 50시간 열처리후 용사층의 주된상은 C $r_{7}$ $C_{3}$이였다. 용사상태에서 경도값은 F/O=3.0조건으로 용사된 코팅층이 $H_{v300}$-1040으로 가장 높았으며, 공기중에서 $600^{\circ}C$, 50시간 열처리한 후, 경도값은 1340으로 증가하였다. 그리고 80$0^{\circ}C$열처리 후 경도값은 약간 감소하였다. 그러나 100$0^{\circ}C$ 열처리 후에도 1060정도로 용사상태의 경우 보다는 높은 경도값을 유지하였다. 이와같이 경도값이 증가하는 이유는 열처리에 따라 용사층이 치밀하게 되고 또한 C $r_{2}$ $O_{3}$의 산화물이 C $r_{3}$ $C_{2}$/C $r_{7}$ $C_{3}$ 내에 생성되어 탄화물/산화물 복합체를 이루기 때문으로 생각된다. 용사상태에서 drosion rate는 F/O비에 따라 2.6-3.05x$10^{-4}$mg/g까지 변화하였다. 또한 $600^{\circ}C$열처리 후에는 2.15-2.3 x $10^{-4}$mg/g이였으며, 80$0^{\circ}C$에서 열처리한 후에는 2.3-2.4x$10^{-4}$mg/g으로 $600^{\circ}C$열처리후 보다 약간 높은 결과를 보였다.결과를 보였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.492-498
• /
• 1999

Mass flow rates of R407C and R290 through capillary tubes were measured with various capillary tube geometries and flow conditions. For all refrigerants tested in the present study, mass flow rate through the capillary tube was strongly dependent on the condensing pressure, subcooling and capillary length and diameter. The flow rate of R407C was 5~10［%］ higher than that of R22 at the same condensing temperature and degree of subcooling, while flow rate for R290 was 40［%］ lower than that for R22. Based on experimental results, an empirical correlation was developed using Pi theorem to predict the mass flow rate through capillary tubes. The predicted flow rates using the model were consistent with the experimental data within ${\pm}$10[%］.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.139-145
• /
• 1998

This paper addresses the R-curve properties, wear resistance, and erosion resistance of the two silicon carbide ceramics with different microstructures, i.e. , fine grained SiC and in situ-toughened SiC(IST SIC). Fine grained SiC exhibits a relatively flat R-curve behavior whereas the IST SiC exhibits a increasing R-curve behavior. The increasing R-curve behavior in IST SiC is attributed to relatively weak grain boundaries. The rate of material removal during wear tests and erosion tests was higher for IST SiC than that for fine grained SiC. This is attributed to the weaker grain boundaries in IST SiC than that in fine grained SiC. It is implied that fracture toughness in short crack regime should be taken into consideration in the interpretation of the microscopical material removal process. We show that the higher the strength of grain boundaries is, the higher wear and erosion resistances are.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.2
• /
• pp.377-386
• /
• 2011

For a smooth algebraic curve C of genus g $\geq$ 4, let $SU_C$(r, d) be the moduli space of semistable bundles of rank r $\geq$ 2 over C with fixed determinant of degree d. When (r,d) = 1, it is known that $SU_C$(r, d) is a smooth Fano variety of Picard number 1, whose rational curves passing through a general point have degree $\geq$ r with respect to the ampl generator of Pic($SU_C$(r, d)). In this paper, we study the locus swept out by the rational curves on $SU_C$(r, d) of degree < r. As a by-product, we present another proof of Torelli theorem on $SU_C$(r, d).

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.353-360
• /
• 2005

When the weight if a concrete member makes problems, or when the cost of the concrete is relatively high, it may be economical to use a hollow concrete member. But a hollow R.C Pier may have poor ductility because of the brittle failure at the inner face of the hollow R.C Pier. This brittle failure results from the absence of the confinement at the inner face of the hollow R.C Pier. To avoid this brittle failure an internally confined hollow R.C Pier was developed. Test results show that the energy ductility ratio of a internally confined hollow R.C Pier have a superior energy ductility ratio to a general hollow R.C Pier.