• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.33-36
• /
• 2015

PURPOSES : It is desirable for buses to be parallel to the face of the bus shelter at a bus stop. In this way, passengers can safely use the buses without moving into the vehicle area. The study was a review of the current bus bay geometric guidelines, to determine whether they lead buses to stop parallel to the face of the bus shelter by analyzing vehicle trajectory. METHODS : A commercial software program for vehicle trajectory analysis was used under our assumptions about bus dimensions and geometric values. The final position of the bus was analyzed for multiple trajectory simulations, reflecting various geometric alternatives. RESULTS : Within the scope of the study, we concluded that the current design guidelines need to be revised by the design values suggested by the study. CONCLUSIONS : The results of the study suggested alternative design values for bus bay geometry, based on the assumption that buses should be parallel to the face of the bus shelter in order to prevent passengers from moving into the vehicle area.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.38-41
• /
• 2002

We have conducted Preliminary investigation to propose a suitable site for superconducting fault current limiter (SFCL) installation in the KEPCOs 154kV grid This investigation limited the application SFCL to the bus-tie position of the grid in the Seoul area. First, we calculated maximum Potential fault current for all substations. Then, among substations where the fault current exceeds the CB capacity, rye selected two substations where buses are being operated untied. For the selected two. S S/S and M S/S. fault currents at the M S/S were estimated to be 22.5㎄ and 24.3㎄ for two buses untied respectively, but 44.2㎄ if buses were tied. Simulation using a hypothetical SFCL of 5 Ohm impedance showed that it controlled the fault current up to 20. 1㎄ for bus-tie Position, 28.4㎄ and 29.9㎄ for both buses. respectively, each of which are under the capacity of the currently installed 31.5㎄ GIS. For both substations a SFCL with 5 Ohm impedance successfully controls the fault current under the CB capacity, and 10 Ohm SFCL may be recommendable to maximize the SFCL effect.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.7-13
• /
• 2011

Matrix multiplication is a fundamental operation of linear algebra and arises in many areas of science and engineering. This paper introduces an efficient parallel matrix multiplication scheme on N ${\times}$ N mesh-connected SIMD array processor, called multiple hierarchical SIMD architecture (HMSA). The architectural characteristic of HMSA is the hierarchically structured control units which consist of a global control unit, N local control units configured diagonally, and $N^2$ processing elements (PEs) arranged in an N ${\times}$ N array. PEs are communicating through local buses connecting four adjacent neighbor PEs in mesh-torus networks and global buses running across the rows and columns called horizontal buses and vertical buses, respectively. This architecture enables HMSA to have the features of diagonally indexed concurrent broadcast and the accessibility to either rows (row control mode) or columns (column control mode) of 2D array PEs alternately. An algorithmic mapping method is used for performance evaluation by mapping matrix multiplication on the proposed architecture. The asymptotic time complexities of them are evaluated and the result shows that paralle matrix multiplication on HMSA can provide significant performance improvement.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.499-510
• /
• 2015

The purpose of this research is to identify new service opportunities for enhancing driving safety of intra-city buses based on driving behavior analysis. Service opportunity identification involves finding target customers of service (to whom), motivations for service (why), service contents (what), and service delivery process (when, where). This paper presents an analysis of driving behaviors using the operational data of intra-city buses in conjunction with traffic accident data and drivers' driving history data. This paper also presents four identified service opportunities based on the data analysis results. This research would contribute to enhancing driving safety of intra-city buses in Korea and serve as a basis for developing new services for driving safety enhancement.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.39-46
• /
• 2018

Low-floor buses service in Korea has been spreading nationwide for transportation users with wheelchair since 2004. However, there is a lot of difficulty in using this information because the low-floor bus information is insufficient. Therefore, it is necessary to improve the service of using low-floor buses for the transportation weak in order to increase the usage rate of low-floor buses for those who use wheelchairs. In this paper, we designed and implemented a low-floor bus reservation system to provide low-floor bus service and low-floor bus reservation service to improve low-floor bus service of wheelchair users. The application of this system is expected to provide a better service to the transportation weak people using low - floor buses.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3347-3352
• /
• 2022

In 2013, the International Atomic Energy Agency (IAEA) changed the recommended maximum range of the Emergency Planning Zone (EPZ) to 30 km, and the Kori Nuclear Power Plant in Republic of Korea has also expanded the EPZ to 30 km, following the recommendation. As a result, metropolitan cities with a high population density are contained within the EPZ, and evacuating millions of people should be considered if the 30 km range of evacuation is to take place. This study proposes an evacuation plan using buses (public transportation) to transport people outside of the EPZ, quickly and efficiently. To verify the appropriate mode share ratio of buses that can guarantee the right of vulnerable road users and reduce traffic congestion, a model was built simulating the Kori Nuclear Power Plant in Ulsan Metropolitan City. The scenarios were established by changing the mode share ratio of buses and passenger cars by 10%. Considering a large-scale network analysis at the city level, a cell transmission model was applied to calculate the evacuation time in each scenario. The result shows that the optimal mode share ratio of buses is 40%, with a total evacuation time of 132 min, considering feasible bus fleets in Ulsan Metropolitan City.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.8
• /
• pp.55-63
• /
• 2020

Recently, people have come to enjoy using movies and music applications, such as YouTube, Netflix, and Watcha Play, on their smart devices while riding public transportation. However, they sometimes miss their destination stations because of these activities. Therefore, in this paper, we propose a disembarking notification system for public city buses using smart devices and high frequencies generated via the buses' speakers. The high frequencies are generated by the public buses' station information broadcasters. Smart devices then analyze the high-frequency signals with their inner microphones, and the proposed application displays a disembarking notification to the user when the user's destination or stop-over station's signal is the same. To evaluate this system's performance, we tested 1,000 real-time disembarking notifications, and the test results showed 98.9% accuracy. Moreover, we compared these results to those using only OpenAPI, and our proposed system featured far better outcomes. Thus, this proposed notification system can prove a useful technology for many people who often use public city buses, as it can notify specific users of their destination stations. Furthermore, this system will become innovative technology for global public transportation by informing users of their desired stations using speakers.

• Journal of Environmental Health Sciences
• /
• v.48 no.1
• /
• pp.44-51
• /
• 2022

Background: Air pollution is increasing together with industrialization and urbanization. In order to reduce air pollution, public transportation is recommended rather than private cars, and the number of passengers using public transportation is increasing accordingly. This study observes the concentration of indoor pollutants in city buses over time. Through this means, we intend to suggest a plan to manage the indoor air quality in city buses. Objectives: The concentration of indoor pollution in public transportation was investigated from April 2021 to January 2022. Based on this, we evaluated the exposure to indoor pollutants. Methods: Six city bus lines in an industrial city were selected for the research, and indoor pollution was measured through IoT (Internet of Things)-based sensor-type measuring devices. The concentration of pollutants was measured every minute, and statistical data were constructed based on the measurement results. Results: In all the city buses studied, the average concentration of pollutants were below the guidelines. However, some measurement results showed cases of exceeding the guidelines. As a result of the analysis by time zone, there were more cases in which pollutants exceeded the standard value during rush hour compared to at other times. A risk assessment for PM₁₀ was performed by evaluating the excess mortality risk from exposure and the risk from inhalation exposure. Conclusions: All measured indoor pollutants in the city buses did not exceed the guidelines. Also, the risk assessment results were found to be within the level of safety. However, if a city bus is used for a long time, there is a possibility that there may be an impact on the human body due to inhalation exposure, so additional management is required.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.66-76
• /
• 2023

The government recently implemented policies to improve transportation for the disabled passengers. On the other hand, metropolitan public transport still lacks adequate services for these individuals. Many new cities lack urban rail lines and focus on high-floor buses for expansion. Wheelchair users can only access to double-decker low-floor seat express buses for intercity travel. This study examined the necessity and rationale for introducing low-floor seat buses by estimating the user's willingness to pay through a contingent valuation method. Two methods for eliciting the willingness to pay were adopted: open-ended and dichotomous choice questions. The binomial logit model was used to estimate the willingness to pay. The results indicated that the general public is willing to pay an additional 126.7 Korean won, while the disabled passengers are willing to pay an additional 117.5 Korean won. When translated into annual economic benefits, this amounts to approximately 35 billion Korean won.

• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.319-323
• /
• 1999

This study was designed to evaluate the exposure to benzene by residents in neighborhoods near a major roadways, by persons waiting buses, and by drivers and service station attendants while refueling. It was confirmed that the outdoor air benzene concentrations near the major roadways were higher than those further away from the sources. However, neither the indoor air nor breath concentrations were different for two specified residential areas. Smoking was confirmed as an important factor for the indoor air benzene levels. Persons waiting buses, drivers and service station attendants were exposed to elevated benzene levels compared to even the residents in neighborhoods near a major roadways. The mean benzene concentration at bus stop was 2.7 to 6.9 times higher than the mean ambient air concentration. The mean benzene concentrations in the breathing zone of drivers and service station attendants were 95 to 160 and 120 to 202 times higher than the mean ambient air concentrations, respectively.