• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1923-1931
• /
• 2000

In this paper, e analyze the performance of the PSS-type Viterbi decoder which can reduce calculations and power consumption using the Monte Carlo simulations. Gaussian and burst noise channels are considered in this simulation, and we achieve that convolutional interleaver can reduce complexity and power consumption in burst noise channel. In order to implement the high-speed PSS-type Viterbi decoder, the architectures of decoder are presented, and we implemented the PSS-type Viterbi decoder for r=1/2, k=3 using the VHDL tool, and prove the decoding process.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.457-459
• /
• 2005

OBS(Optical Burst Switching) 망에서 우선 순위를 보장해 주기 위해 채널 선정 방식(preemptive channel reservation scheme)이 제안되어 왔다. 채널 선점으로 인해 drop된 버스트의 크기가 OBS 망의 전체 성능에 영향을 끼치는 요소인데도 불구하고 기존의 채널 선점 방식은 선점될 채널 선택 시에 버스트의 채널 사용 시간(elapsed time)만을 고려하고 있다. 따라서 본 논문에서는 각 버스트의 채널 사용 시간과 버스트 길이의 합이 작은 채널을 선택하는 선점 방식으로써 Length-based Smallest Elapsed time Selection(LSE)을 제안한다 시뮬레이션을 통하여 제안하는 LSE 방식이 기존의 SE(Smallest Elapsed time)에 비해서 버스트 손실 성능 면에서 우수함을 알 수 있었다.

• International Journal of Contents
• /
• v.11 no.1
• /
• pp.7-14
• /
• 2015

In this paper, we derive the outage probability for M-ary phase shifting keying (MPSK) and M-ary quadrature amplitude modulation (MQAM) burst transmission (BT) of adaptive decode-and-forward (ADF) cooperative relay systems over quasi-static Rayleigh fading channels. Within a burst, there are pilot symbols and data symbols. Pilot symbols are used for channel estimation schemes and each relay node's transmission mode selection schemes. At first, we focus on ADF relay systems in which the probability density function (PDF) is derived on the basis of error events at relay nodes corresponding to channel estimation errors. Next, the average outage probability is derived as an approximate expression for an arbitrary link signal-to-noise ratio (SNR) for different modulation orders. Its accuracy is demonstrated by comparison with simulation results. Further, it is confirmed that BT-ADF relay systems with pilot symbol based channel estimation schemes enables to select correctly decoded relay nodes without additional signaling between relay nodes and the destination node, and it is verified that the ideal performance is achieved with small SNR loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1548-1557
• /
• 1994

In this paper, the dual mode error correcting adaptive decoding algorithm which is adapted to the continuous phase frequency shift keying(CPFSK) modulation is presented as a technique for overcoming the distortion that reveals from the Rayleigh fading channel. The dual mode adaptive decoder nominally operates as a Viterbi decoder and switches to the burst error correcting mode, whenever the decoder detects an uncorrectable burst error pattern. Under the fading channel environment and when the usable memory quantity is restricted, the dual mode adaptive decoding algorithm shows an advantage in the BER performance over the interleaving technique, and also obtains the merit of not needing the large time delay that the interleaving technique requires. The experimental results from the computer simulation demonstrate the performance of the algorithm and verify the theoretical results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.43-50
• /
• 2003

This paper describes the optical resource reservation protocol for Optical Burst Switching(OBS) networks, in which the burst sending time and the burst size at an ingress node are determined by the available resources between the ingress and egress nodes. Our scheme attempts to improve the burst contention resolution and optical channel utilization. We analyze the performance of the optical resource reservation protocol by using NS2 simulator.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.679-681
• /
• 2007

In this letter, we demonstrate a technique for suppression of transients in output bursts of an erbium-doped fiber amplifier (EDFA) in an optical burst network. To suppress the transients, the EDFA is forward-fed by non-fluctuating input utilizing a power-modulated burst control packet channel. Using the technique, we obtained a maximum 1.7 dB reduction in gain transient in the EDFA output, and we transmitted 9.953 Gbps data bursts and 2.488 Gbps burst control packets stably.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1043-1048
• /
• 2011

In this paper, a newsynchronization technique applied to burst-mode communication is proposed. A synchronization technique is to estimate carrier frequency and phase offsets in a noisy channel environment. A fundamental problem for estimating the parameters(carrier phase and frequency offsets) in burst-mode transmission is that the ways of pursuing estimation accuracy and transmission efficiency are always trade-off. To solve this problem, a new carrier recovery technique is proposed to improve the transmission efficiency with reliable performance especially at low S/N. In the proposed technique, the synchronization parameters are first estimated based on a data-aided feed-forward estimation scheme. Then, a phase tracker using decision-directed DPLL estimates the phase offset for the data portion of the burst data. From simulation results, it shows fast synchronization with shorter preamble maintaining reasonable BER performance at low S/N.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.627-633
• /
• 2006

In spite of many advantages of Meteor Burst Communications(MBC) on its transmission channel, the fact that its duty rate is less than 10 percents is a considerable deficiency of MBC. To overcome with this deficiency without paying large cost, we use a direct sequence(DS) simple reception system. This method doesn't need to add the components for acquisition or tracking the signal so that it keeps the cost efficiency of the MBC. But it has a disadvantage that its duty rate shows a large decline by noise. For this problem we adopt the proposed system applying a transversal filter circuit. The improvement by this method is more significant when the received signal is weak Simulation results show as t1 is 100ms, then the burst length would be increased by 35% when the initial value of the received signal power increases by 3 dB, t2 is 135ms. If the power increases by 6dB the burst length would be 170ms thus increased by 70%, which shows a great enhancement. Suppose now that t1 is 50ms and the power is increased by 3dB, then t2 would be increased by 70% to 85ms, and increasing the power by 6dB it would be increased by 130% to 115ms.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.139-146
• /
• 2002

The third generation mobile communication needs to provide multimedia service with increased data rates. Thus an efficient allocation of radio and network resources is very important. This paper models the 'burst switching' as an efficient radio resource allocation scheme and the performance is compared to the circuit and packet switching. In burst switching, radio resource is allocated to a call for the duration of data bursts rather than an entire session or a single packet as in the case of circuit and packet switching. After a stream of data burst, if a packet does not arrive during timer2 value ($\tau_{2}$), the channel of physical layer is released and the call stays in suspended state. Again if a packet does not arrive for timerl value ($\tau_{1}$) in the suspended state, the upper layer is also released. Thus the two timer values to minimize the sum of access delay and queuing delay need to be determined. In this paper, we focus on the decision of $\tau_{2}$ which minimizes the access and queueing delay with the assumption that traffic arrivals follow Poison process. The simulation, however, is performed with Pareto distribution which well describes the bursty traffic. The computational results show that the delay and the packet loss probability by the burst switching is dramatically reduced compared to the packet switching.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1158-1163
• /
• 2002

In this paper it is focused on the relation between CLR (Cell Loss Ratio) and blocking probability, GoS(Grade of Services) parameters in the wireless ATM (Asynchronous Transfer Mode) access network which consists of access node and wireless channel. Traffic model of wireless ATM access network is based on the cell scale, burst scale and call connection level. The CLR equation due to buffer overflow for wireless access node is derived for CBR (Constant Bit Rate) traffic. The CLR equation due to random bit errors and burst errors for wireless channel is derived. Using the CLR equation for both access node and wireless channel, the CLR equation of wireless ATM access network is derived. The relation between access network CLR and blocking probability is analyzed for CBR traffic.