• Journal of the Korean Professional Engineers Association
• /
• v.14 no.3
• /
• pp.9-21
• /
• 1981

The rationalization for Tunnel Drifting is based on the high productivity which is achievable due to Continuous work with a Jumbo Drill, resulting in a much higher efficiency them the Conventional method of blasting, mucking and supporting services. Large projects of over 4,000m Tunnel Drifting are condidated to justify the use of a Jumbo Drill with a combination of superior explosives, machinery and techniques. During a Tunnel Drifting test, Gulita, Nabit and slurry made by Nitro Nobel were employed with following results. 1, Conditions: a. Granite Rock with Two free face b. Burden (W), 2m c. Diameter of hole, 42mm d. Depth of hole 3.5m e. Hole pitch 0.6m f. Charged Explosive per hole Gelatin Dynamite 4 pieces (112.5${\times}$4ea)+Guuita 5 pieces(110g${\times}$5ea) g. Simal-taneous Detonation h. After the blasting resultant rock size was Less 40% of the 0.3m Lumps. 2. Calculation results W=q/Wn=100cm‥‥‥Burden in simultaneous blasting 0.865kg(7.7ea)/hole ‥‥‥Amount of charge but hole pitch is 1.5W-2W The estimated cost of using a Jumbo Drill for the Construction of a 3,000,000 bbL sub-surface oil storage would be as follows: This calculation is based on the Jumbo Drill advancing 3.6m per blasting cycle. Unit cost/bbL Excavation $3.13 The attached sheet shows ideal Drilling pattern with Burn Cut & Smooth blasting method. In conclusion, it is my opinion that this method will assure safety and save cost and improve our technical know-how.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.92.1-92.1
• /
• 2011

Anode off-gas of high temperature fuel cells such as MCFC contains a significant amount of combustible components like hydrogen, carbon monoxide and methane according to fuel utilization ratio of the fuel cell stack. Thus, it is important to fully burn anode off-gas and utilize the generated heat in order to increase system efficiency and reduce emissions as well. In the present study, 25 kW catalytic combustor has been developed for the application to a load-following 300kW MCFC system. Mixing and combustion characteristics have been experimentally investigated with the catalytic combustor. Since the performance of catalytic combustor directly depends on the combustion catalyst, this study has been focused on the experimental investigation on the combustion characteristics of multiple catalysts having different structures and compositions. Results show that the exhaust emissions are highly dependent on the catalyst loading and the ratio of catalytic components. Test results at load-following conditions are also shown in the present study.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.200-208
• /
• 2002

Two-component polyurethane flame-retardant coatings were prepared by blending trichloro lactone modified polyesters (TAPTS) and isocyanate, Desmodur IL. Polycondensation reaction of trichlorobenzoic acid (TBA) as a flame-retardant component, and adipic acid with trimethylolpropane, polycaprolactone 0201, and 1,4-butanediol gave the corresponding TAPTs. The content of TBA was adjusted from 10 to 30 wt% in our experiment. It was found that various properties of these new flame-retardant coatings were comparable to other non-flame-retardant coatings. We also carried out three different tests for the measurement of flammability of flame -retardant coatings. The results of vertical burning test for the coatings containing more than 20 wt% of TBA were determined as 'no burn'. The results of flammability test for the coatings with 20 and 30 wt% of TBA contents indicated the limiting oxygen index (LOI) values of 25% and 27% respectively, which implied relatively good flame retardancy. They also showed the char length of 3.6-5.2 cm according to $45^{\circ}$ Meckel burner test, which can be classified as the first grade flame-retardant coatings.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.233-238
• /
• 2002

Moxibustion is one of major healing technique in oriental medicine. It has been widely used in many diseases such as rheumatoid arthritis, Hashimoto disease, breech presentation, etc. However, till now, effects of moxibustion on NK cell activity and relations between sympathetic nerve system(SNS) and the immune alteration induced by moxibustion were not well studied. This study was designed to evaluate effects of moxibustion on NK cell activity and the intervention of SNS in the alteration of NK cell activity induced by moxibustion. Splenic NK cytotoxity was measured in a standard 4-h 51Cr release assay. We measured the NK cytotoxity at after moxibustion stimulation for 1,3,5, and 7 days, and also measured the NK cell cytotoxity after 3 and 7 days burn stimulation with similar temperature. IL-2, IL-4, INF-γ in serum were measured by rat IL-2, IL-4, INF-γ ELISA TEST KIT. To evaluate the effects of sympathectomy on alteration of NK cell cytotoxity, 6-hydroxydopamine(6-OHDA : 5Omg/kg) was used. We showed that NK cell activity of moxibustion stimulation group increased at the 3rd day, and declined at 7th day in comparison with that of contol group. In moxibustion stimulation group, NK cell activity of 3 day stimulation group was significantly higher than sham group. On the contrary, in burn stimulation group, NK cell activity was significantly higher than that of sham groups at 3rd, 7th days. Patterns between moxibustion and burns were different. INF- γ level of 3 days moxibustion stimulation group significantly higher than sham group. IL 2 level among groups were not different. IL-4 was not detected in serum with this method. Sympathectomy abolished the NK cell activity alteration induced by moxibustion. The results suggest that moxibustion induces the alteration of NK cell activity, along with INF-γ and SNS is related to these effects.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.177-180
• /
• 2009

A Possibility of combustion instability on longitudinal mode has a high level at large scale of L/D. Solid propellant has a metal particle and a grain of control to pressure oscillation. Solid rocket motor in slotted-tube grain controls pressure oscillation of longitudinal mode. If slot length is shot, pressure oscillation of longitudinal mode is amplified by cylinder part after middle phase of total burn time. A study has analyzed pressure oscillation of longitudinal mode at spectrum and acoustic modal analysis at pressure of result on static firing test.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.3
• /
• pp.164-171
• /
• 2005

Iodine-Induced Stress Corrosion Cracking (ISCC) properties of Zircaloy-4 and HANA4 developed in KAERI for the high burn-up nuclear fuel cladding were evaluated. To confirm the effect of final heat treatment on ISCC resistance of Zr-alloy, stress relieved and recrystallized specimens were prepared and tested. With the pre-cracked specimen at internal surface, ISCC crack propagation rates and threshold stress intensity factor ($K_{ISCC}$) based on the fracture mechanics were measured by internal pressurization test at $350^{\circ}C$ in iodine environment. $K_{ISCC}$ of Zircaloy-4 and HANA4 cladding were $3.3MPa{\cdot}m^{1/2}$ and $4.4MPa{\cdot}m^{1/2}$, respectively. Pitting corrosion at the crack surface was observed and it seemed that TG crack propagation was derived from the pitting.

• Archives of Plastic Surgery
• /
• v.51 no.2
• /
• pp.251-257
• /
• 2024

Background Plastic surgery has developed to benefit in a variety of challenging areas formerly handled by other disciplines. Medical students do not have a clear picture of plastic surgery as a career due to lacking scope, clinical practice, and understanding of plastic surgery as a clinical area of expertise, including general practitioners, nursing staff, medical trainees, and the general public, and misconceptions about the extent of reconstructive and plastic surgery. Methods A cross-sectional observational study was conducted on Kuwait University Medical students (2nd-7th Years) over a period of 1 month. A questionnaire and a consent form were provided to eligible students. The inclusion criteria were Kuwait University Medical students from 2nd to 7th Years with signed consent form. The response was collected via email sent in coordination with the Vice Dean of Student Affairs in the Faculty of Medicine. Using statistical package for the social sciences, responses were statistically analyzed. Pearson's chi-square test was used to calculate p-values, where p < 0.05 was considered statistically significant. Results A total of 244 eligible medical students, 121 males and 123 females, were included in the study, with a mean age of 21 (±2) years. Similarly, 126 (51.6%) were preclinical students (2nd-4th-year students), while 118 (48.4%) were clinical students (5th-7th-year students). About 79.8% of medical students believed that plastic surgery plays an essential role in trauma management, whereas 9.2% did not consider plastic surgery significant for trauma management. This study found that only 15.5% of medical students were interested in enrolling in plastic surgery residency after graduation, while 47.1% of students did not consider plastic surgery residency after graduation. However, 37.4% were uncertain. The two most driving factors in deciding on plastic surgery residency were expected income (61.8%) and lifestyle (14.3%). Conclusion Improving medical students' education quality can enhance their perception and awareness of plastic surgery. Students should be taught the broader scope of plastic surgery. The inclusion of formal training during undergraduation is the essence of time and should be added to or improved during plastic surgery rotations with more emphasis on reconstructive and hand/peripheral nerve surgery. Student-led interest groups can be a useful tool for educating students about their specialty.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.111-111
• /
• 2003

Several fungal isolates were isolated from diseased monochoria(Monochoria vaginalis, weed of paddy field), which has an resistance to sulfonyl urea(S.U.) herbicide, and were evaluated in the laboratory and greenhouse as potential mycoherbicide. Eight fungi, Alternaria sp., Colletotrichum sp., Curvularia sp., Paenicillium sp and etc. were observed in the isolates. Pathogenicity testing were done on the monochorias in the greenhouse. Monochorias were inoculated with suspensions containing conidia of each isolate at the rates of 1.0 ${\times}$ 10$\^$5/ conidia/ml and 0.1％ Tween 80 with hand-gun sprayer. Curvularia sp. and an unidentified fungal isolate caused 90-95％ mortality on the monochorias 15∼20 days after inoculation. However the other isolates induced slight symptom of disease on the monochorias. In the early stage of disease development sun-burn appearance was shown at the infected site and the last infected leaves and stems were withered to death. Subsequently the pathogenicity on the rice was evaluated with above two effective isolates. From the test an unidentified isolate showed pathogenicity on the rice but Curvularia sp., named as DBB2003, didn't. Now the mass production and formulation using Curvularia sp. DBB2003 are in progress and the field test will be followed. Combination product with Curvularia sp. DBB2003 and chemical herbicide will be more effect to control the monochoria resisted on S.U. herbicide and need to be further tested.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3191-3195
• /
• 2012

New silver nanoparticle (AgNP)-loaded amino acid based hydrogels were synthesized successfully from poly (vinyl alcohol) (PVA) and poly(acryl amide-co-acryloyl phenyl alanine) (PAA) by redox polymerization. The formation of AgNP in hydrogels was confirmed by using a UV-Vis spectrophotometer and XRD. The structure and morphology of silver nanocomposite hydrogels were studied by using a scanning electron microscopy (SEM), which demonstrated scattered nanoparticles, ca. 10-20 nm. Thermogravimetric analysis revealed large differences of weight loss (i.e., 48%) between the prestine hydrogel and silver nanocomposite. The antibacterial studies of AgNP-loaded PAA (Ag-PAA) hydrogels was evaluated against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria. These Ag-PAA hydrogels showed significant activities against all the test bacteria. Newly developed hydrogels could be used for medical applications, such as artificial burn dressings.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.155-160
• /
• 2001

The low NOx characteristics have been investigated to develop the combustor for micro turbine. The lean premixed combustion technology was applied to reduce the NOx emission. The test was conducted at the condition of high temperature and ambient pressure. The combustion air which has the temperature of $450\sim650K$ were supplied to the combustor through the air preheater. The temperature and emissions of NOx and CO were measured at the exit of combustor, The exit temperature and NOx were increased and CO was decreased with increasing inlet air temperature. The premixing chamber can be operated very lean condition of equivalence ratio around 0.35. The NOx was decreased with decreasing the equivalence ratio. The CO was decreased with decreasing the equivalence ratio, but the CO was increased with decreasing the equivalence ratio below 0.4. But, at the very lean condition of equivalence ratio below 0.35 both NOx and CO were increased because of the flame unstability. The NOx was decreased and CO was increased with increasing inlet air flowrate. This results can be used to determine the size of combustor. Consequently the performance of combustor shows the possibility of the application to the gas turbine system.