• Nutritional Sciences
• /
• 제2권2호
• /
• pp.93-101
• /
• 1999

The aim of this study was to investigate influence of body build on body composition, energy metabolic state and insulin concentration of blood. 29 male athletes and 36 male non-athletic students were recruited for the study. Anthropometry including chest depth and breadth, fat mass, fat fee mass, tricep skinfold thickness were measured. fasting glucose, lactate, triglyceride, fee fatty acid, and insulin concentration in serum were measured . Body build was assessed using metric index, which calculated by regression equations of Mohr and Greil. The athletic and non-athletic students were allocated to 3 body build, that is leptomorph, mesomorph, and pyknomorph. Resting metabolic rate was calculated. Respiratory quotient was determined through ratio of measured VO$_2$, and V$CO_2$. Most non-athletes have a leptomorphic body build, in contrast to athletes mesomorphic type. The body build type influenced body composition differently between non-athletic group and athletic group. Weight, body mass index, body fat mass and fat mass proportion (%), and fat-free mass increased from leptomorph to pyknormorph in non-athletic group. Pyknormorphic athletes have a significant higher body mass index, fat mass, fat free mass than other body build type. Serum glucose, triglyceride, lactate, insulin showed significant differences only in non-athletic group between leptomorph and mesomorph. RMR increased significantly from leptomorph to mesomorph in non-athletes. There was no significant difference of RQ among 3 body build types in both athletes and non-athletes. This study gives a coherent data on body build and body composition for athletes and non-athletes students. The influence of body builds on energy metabolic status of serum was different between athletes and non-athletes.

• 한국건설관리학회논문집
• /
• 제4권3호
• /
• pp.119-127
• /
• 2003

오늘날 프로젝트 수행방식 중 설계시공일괄방식은 전통적 수행방식의 대안으로 점차 선호되고 있다. 1995년 처음 도입된 설계시공일괄방식은 아직까지 많은 문제들을 발생시켜오고 있다 초기 선행연구보고서들은 여러 가지 방법으로 설계시공일괄방식 프로젝트 수행을 향상시키고자 노력해 왔으나, 아직까지는 그다지 큰 영향을 미치지 못하고 있다. 본 연구에서는 설계시공일괄방식 프로젝트 수행을 향상하기 위해 4단계에 걸쳐 설계시공일괄방식 성공모델을 제시하고자 한다. 첫째로 연구를 위한 적절한 모델링 방법을 찾고, 둘째로 설계시공일괄방식의 현황을 분석하여 현황모델을 만든다. 셋째로 현황모델과 기존연구들을 분석하여 문제점 모델을 만든다. 마지막으로 해외 설계시공일괄방식을 분석하여 성공요소와 환경을 찾아 성공적인 설계시공일괄방식의 모델을 구현한다.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.13-17
• /
• 2019

This study was conducted to analyse the application of pollutant build-up model on various urban landuses and to characterize pollutant build-up on urban areas as a source of stormwater runoff pollution. The monitored data from impervious surfaces in urban areas such as commercial (8 sites), industrial (10 sites), road (8 sites), residential (10 sites), recreational (5 sites) from 2008 to 2016 were used for the analysis of pollutant build-up model. Based on the results, the average runoff coefficients vary from 0.35 to 0.61. In all landuses except recreational landuse, the runoff coefficient is 0.5 or more, which is the highest in the commercial area. Commercial landuse where pollutants occur at the highest EMC in all landuse, and it is considered that NPS management is necessary compared with other landuses. The maximum build-up load for organic matter (BOD) was highest in the commercial area ($4.59g/m^2$), and for particular matter (TSS) in the road area ($5.90g/m^2$) while for nutrient (TN and TP) in the residential area ($0.40g/m^2$, $0.14g/m^2$). The rate constants ranged from 0.1 to 1.3 1/day depending on landuse and pollutant parameters, which means that pollutant accumulation occurs between 1 and 10 days during dry day. It is clear that these build-up curves can generally be classified based on landuse. Antecedent dry day (ADD) is a suitable and reasonable variable for developing pollutant build-up functions. The pollutant build-up curves for different landuse shows that these build-up curves can be generally categorized based on landuse.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.130-136
• /
• 2000

Generally, the build-up printed circuit board manufactured by the sequential process with etching, plating, drilling etc. requires many types of equipments and lead time. Etching process is suitable for mass production, however, it is not adequate for manufacturing prototype in the developing stage. In this study, we introduce a screen printing technology to prototyping a build-up printed circuit board. As for the material, photo/thermal curable resin and conductive paste are used for the formation of dielectric and conductor. The build-up structure is made by subsequent processes such as the formation of liquid resin thin layer, the solidification by UV/IR light, and via filling with conductive paste. By use of photo curable resin, productivity is greatly enhanced compared with thermal curable resin. Finally, the basic concept and the possibility of build-up printed circuit board prototyping are proposed in comparison with to the conventional process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1089-1092
• /
• 2001

In the stereolithography process, build parameters are laser power, scan velocity, scan width, bean diameter, layer thickness and so on. These values are determined according to product accuracy and build time. Build time can be reduced by improving of scan velocity, laser power, layer thickness, hatching space and so on. But variation of these parameters influence part accuracy, surface roughness, strength. This paper observed cure properties in various beam diameter. In order to examine these, relationships of scan velocity and cure depth, scan velocity and cure width according to various beam diameter in one scan line are measured. And cure thickness is measured according to beam diameter and scan velocity in scan surface of one layer. For reduction of build time, beam diameter and scan velocity is proposed in stereolithography process.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.25-27
• /
• 2006

This paper proposes a new full ZVS-range asymmetrical half bridge converter. It uses the variable transient current build-up technique with the load variations. The current build-up is accomplished by using the secondary synchronous switch control. Due to the blocking capacitor in secondary side, the voltage applied to leakage inductor varies with the load variations during current build-up period. Therefore, the unnecessary current build-up of leakage inductor current in heavy load condition is prevented and more current build-up in medium and light load condition is achieved for ZVS operation. That is, the variant current build-up with the load variation is accomplished for the ZVS operation. Furthermore, the DC offset of the transformer magnetizing current is also eliminated and the utilization of magnetic core is maximized.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.129-130
• /
• 2012

Although the order of Design-Build is being expanded by increasing construction scale and demanding hybrid function, the suitable regulation of the contracts is not settled. Design-Build is way by government because there are big construction of much government leading in contract relation high position occupy. So, case that prebendary's claim institution develops by litigation is very rare. But, recently Design-Build is magnified. So, these dispute factors is becoming visualization gradually. The contract system is needed to be consistent by international standard to deal with the problem. This study suggests the useful solutions in detail concerned with the main factor of change order claim by each Design-Build phases through practical sorting and analysis of the causes of Change Order-Claim.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.289-296
• /
• 1999

The integration of the LSI has been greatly improved and the circuit patters on the LSI are becoming finer line and pitch. The high-density electronic packaging technology is improved. In order to realize the high-density packaging technology, the density of the circuit wiring of the printed circuit boards have also been more dense. The build-up process multilayer printed circuit board technology have a lot of vias, possibilities of the finer conductor wirings and have a freedom of capabilities of wiring design. The build-up process printed circuit boards have the wiring rules which are the pattern width: $100-20\mu\textrm{m}$, the via hole diameter: $100-50\mu\textrm{m}$. There three kinds of build-up processes as far materials and hole drilling. In this paper, the recent technology trends of the build-up printed circuit board technologies are described.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.410-413
• /
• 2003

건설시장에서 경쟁력을 강화하고 국제정책에 대응하기 위하여 설계업체와 시공업체의 협력을 장려하는 설계시공 일관입찰방식이 대두되었다. 설계시공일괄입찰방식은 공기단축, 사업비 절약, 품질 향상을 위한 전도 유망한 입찰방식이지만 국내 건설산업에서는 제도의 미비, 관계자들의 경험 및 인식부족 등으로 이러한 장점을 살리지 못하고 있다. 이에 따라 본 연구에서는 국내 공공공사 설계시공일괄입찰방식에서의 문제점을 사업비, 품질, 사업기간의 측면에서 분석하여 개선방안을 제안하고자 한다.

• 한국건설관리학회논문집
• /
• 제6권4호
• /
• pp.91-100
• /
• 2005

건설 전체 프로세스를 하나의 주체가 단일 책임하에 수행하는 일괄입찰방식은 설계와 시공의 연계로 인한 기술력확보, 공기단축, 사업비절감, 품질확보 등의 예상효과로 인해 적용이 확대되리라 예상되는 발주방식의 하나이다. 한편, 국내 일괄입찰방식의 낙찰자 결정방법은 일괄입찰방식으로 수행되는 모든 프로젝트에 동일한 배점기준을 적용하도록 되어 있어, 일괄사업자 선정시 발주자의 목적과 프로젝트의 특성을 반영하기 어려운 것이 현실이다. 이에 본 연구에서는 일괄사업자 선정에 있어서 발주자의 목적과 프로젝트의 특성을 반영할 수 있는 일괄입찰방식의 적격심사 분야별 배점 결정모델을 제안함으로써, 발주자가 당해 프로젝트에 최적인 일괄사업자를 합리적으로 선정하는 것을 돕고자 하였다.