• 한국해양학회지
• /
• v.27 no.4
• /
• pp.277-289
• /
• 1992

Kyeonggi Bay, a macrotidal coastal embayment in the Yellow Sea coast of central korea, is fringed by vastly developed tidal flats. About 400 surface sediment samples were collected from the intertidal and subtidal zones of Kyeonggi Bay for a study of the sediment distribution pattern and the surface sediment characteristics of this environment. The kyeonggi Bay surface sediment becomes progressively finer in the shoreward direction, from offshore sand to shoreward silty sand and sandy silt. This shoreward-fining trend is repeated again on the tidal flat and, as a consequence, a grain-size break occurs near the low-water line which separates the intertidal area from the subtidal one. The intertidal and subtidal sediments differ from each other in textural characteristics such as mean grain size and skewness and this can be interpreted to result from differences in hydraulic energy and morphology between the two environments. The mineral and chemical compositions of the Kyeonggi Bay sediments are largely controlled by the sediment grain size. Smectite was nearly absent in the clay mineral assemblage of Kyeonggi Bay sediment. The contents of Co, Cu and Ni were high in the Banweol tidal flat, which suggests a continuous process of accumulation of these metals. the intertidal environment appears to respond rapidly to artificial coastal modifications, the effects of which should be taken into consideration when planning a dam construction or coastal reclamation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.84-93
• /
• 2011

Levee line mapping is critical to the protection of environments in river zones, the prevention of river flood and the development of river zones. Use of the remote sensing data such as LiDAR and aerial orthoimage is efficient for river mapping due to their accessibility and higher accuracy in horizontal and vertical direction. Airborne laser scanning (LiDAR) has been used for river zone mapping due to its ability to penetrate shallow water and its high vertical accuracy. Use of image source is also efficient for extraction of features by analysis of its image source. Therefore, aerial orthoimage also have been used for river zone mapping tasks due to its image source and its higher accuracy in horizontal direction. Due to these advantages, in this paper, research on three dimensional levee line mapping is implemented using LiDAR and aerial orthoimage separately. Accuracy measurement is implemented for both extracted lines generated by each data using the ground truths and statistical comparison is implemented between two measurement results. Statistical results show that the generated 3D levee line using LiDAR data has higher accuracy than the generated 3D levee line using aerial orthoimage in horizontal direction and vertical direction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.40-46
• /
• 2015

Arctic Ocean has rapidly melted due to global warming, by this, commercial ship has been operating through the area. Reason to develop the Northern Sea Route(NSR) even in extreme conditions, the distance than the existing route is shortened, which bring economic benefits. For these reason, the International Maritime Organization(IMO) established safety standards of the Arctic navigation(Polar Code) in order to ensure safe operation in the Northern Sea Route. In this study, it has been described ice types and safety standards of Artic vessel what officer needs to know for safe navigation on the Arctic Ocean. And It was verified by simulation the theoretical knowledge for the safe operation of the Arctic vessel. As a result, it was found that ship needs to reduce speed and analyze ice for safe operation before enter into the ice, it is necessary to enter at right angle to break ice safety and efficiently. Also according to the result of the simulation of navigation entering in ice channel(Lead), it was difficult to change course, it is believed that require emergency training for passing Vessel. In the future, It shall be analyzed precisely under various conditions of scenario.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.20-27
• /
• 1985

This study was carried out to investigate the histological changes after the infection of nuclear and cytoplasmic polyhedrosis viruses(NPV, CPV) and the resistance to the viruses in various varieties of the silkworm fed on artificial diet. The results obtained were as follows; Among four varieties of silkworm tested, Jam 107$\times$Jam 108 was more resistant than the other varieties tested and Jam 119$\times$Jam 120 was the most resistant to CPV. In case of peroral infection with NPV, Jam 107$\times$Jam 108 showed lower mortality than the remained varieties in low concentration (104/ml). However, all varieties showed high mortality as the concentration of viruses was increased. With infection of CPV, the varieties showed high mortality at the concentration of 107 and 108/ml, while Jam 119$\times$Jam 120 showed the lowest mortality at virus concentration of 104/ml. The fat bodies, epidermal cells and tracheal epithelial cells showed high susceptibility to NPV to break the cells completely and liberate the debris to the body cavity. The CPV infected only the cylindrical cells of mid-gut and formed polyhedrons. In some cells, CPV was liberated to gastral cavity. In the electrophoretic pattern of hemolymph protein of silkworm larvae infected with NPV, bands were dimmed and disappeared as symptom aggravated after infection. Electrophoretic pattern of homolymph proteins of silkworm larvae infected with CPV showed no numerical difference at the later stage of infection, and one or two bands was observed along with lowering the concentrations.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.269-275
• /
• 2007

Sodium type faujasite(FAU) zeolite membranes with a thickness of 5${\mu}m$ and a Si/Al molar ratio of 1.5 were prepared by the secondary growth process. The $CO_2/N_2$ separation in the vacuum mode was investigated at $30^{\circ}C$ for an equimolar $CO_2-N_2$ mixed gas before and after embedding 13X zeolite beads in the permeate side. The embedded 13X zeolite beads improved both $CO_2$ permeance and $CO_2/N_2$ separation factor, simultaneously. The phenomenon was explained by an increment in the $CO_2$ desorption rate at the FAU zeolite/$\alpha-Al_2O_3$ phase boundary due to an enhanced $CO_2$ escaping through the pore channels of the $\alpha-Al_2O_3$ support layer. In the present paper, it will be emphasized that a hybridization of a membrane with an adsorbent can provide a key to break through the trade-off between permeance and separation factor, generally shown in a membrane separation.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.223-231
• /
• 2015

Korea port customs surveillance of administration is operated around the 24 hours without a break in accordance with the characteristic of trade, in this specific environment, Ocean fisheries officials are performing this important duty. This research investigated various factors which might influence Korea Customs Service civil servants who are engaged in port, based on advanced researches on job satisfaction and Herzberg's two factors(motive hygene factor), and analyzed the difference in job satisfaction in respect of job satisfaction composition according to Ocean fisheries officials at port customs sociodemographic characteristics through a survey. Also, the researcher comprehended the factors of job satisfaction which have the biggest influence on the whole job satisfaction. Based on the analysis result, The researcher expects that the results of this research can contribute to customs administration's inherent goal achievement by finding out customs civil servants' job satisfaction degradation factors, who are engaged in port surveillance of administration, and properly controlling them and improving organizational members' job satisfaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.268-275
• /
• 2018

The purpose of this study is to investigate what items are needed for reemployment according to the life cycle of women and to provide basic data to address the career discontinuity of women. The study selected five women currently unemployed living in Daejeon who were taking classes related to entrepreneurship at the Cultural Center and the Women Resource Development Center. The data collection period was from October to December, 2017, and collected from in depth interviews. An open-ended interview was used to explore the content of the interview process. The results of the study are as follows: Support policies for women with career disruptions should, above all, be given priority over career support to ensure that currently employed women do not quit their jobs due to marriage, childbirth or childcare. In addition, there is a need to improve the relevant systems and to implement vocational education and training programs so that women with career discontinuity can reenter the labor market. To do this, it is necessary to establish and support career planning in order to understand the effects of women's lifecycles and to support women's economic activity.

• Journal of Distribution Science
• /
• v.13 no.11
• /
• pp.123-130
• /
• 2015

Purpose - Due to highly elevated levels of competition, many companies today have to face the problem of decreasing profits even when their actual sales volume is increasing. This is a common phenomenon that is seen occurring among companies that focus heavily on quantitative growth rather than qualitative growth. These two aspects of growth should be well balanced for a company to create a sustainable business model. For supply chain management (SCM) planners, the optimized, quantified flow of resources used to be of major interest for decades. However, this trend is rapidly changing so that managers can put the appropriate balance between sales volume and sales quality, which can be evaluated from the profit margin. Profit optimization is a methodology for companies to use to achieve solutions focused more on profitability than sales volume. In this study, we attempt to provide executional insight for companies considering implementation of the profit optimization system to enhance their business profitability. Research design, data, and methodology - In this study, we present a comprehensive explanation of the subject of profit optimization, including the fundamental concepts, the most common profit optimization logic algorithm -linear programming -the business functional scope of the profit optimization system, major key success factors for implementing the profit optimization system at a business organization, and weekly level detailed business processes to actively manage effective system performance in achieving the goals of the system. Additionally, for the purpose of providing more realistic and practical information, we carefully investigate a profit optimization system implementation case study project fulfilled for company S. The project duration was about eight months, with four full-time system development consultants deployed for the period. To guarantee the project's success, the organization adopted a proven system implementation methodology, supply chain management (SCM) six-sigma. SCM six-sigma was originally developed by a group of talented consultants within Samsung SDS through focused efforts and investment in synthesizing SCM and six-sigma to improve and innovate their SCM operations across the entire Samsung Organization. Results - Profit optimization can enable a company to create sales and production plans focused on more profitable products and customers, resulting in sustainable growth. In this study, we explain the concept of profit optimization and prerequisites for successful implementation of the system. Furthermore, the efficient way of system security administration, one of the hottest topics today, is also addressed. Conclusion - This case study can benefit numerous companies that are eagerly searching for ways to break-through current profitability levels. We cannot guarantee that the decision to deploy the profit optimization system will bring success, but we can guarantee that with the help of our study, companies trying to implement profit optimization systems can minimize various possible risks across various system implementation phases. The actual system implementation case of the profit optimization project at company S introduced here can provide valuable lessons for both business organizations and research communities.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.183-192
• /
• 2017

This study aims to suggest improved design for both non-smokers and smokers to minimize inconvenience of smoke, at the same time, allow smoking in comfortable environment. The study was researched in three categories: First, consciousness research regarding smoking booth, second, preference research regarding product design, and third, research on emotional words about smoking booth by emotion evaluation. The result of design preference research was, first of all, smoking booth for smokers should be designed in both notable and familiar shape rather than stiff and rough shape. Second, color for the booth should apply warm colors such as white, pastel, and bright tone rather than prime colors. Third, the internal circulation filter in smoking booth should be managed thoroughly. In addition, extra seats and ventilation design is necessary to prevent passive smoking. The result of emotion evaluation was that people recognized certain words in four aspects. Each image word for factor 1 was "functional emotion', factor 2 was "psychological emotion", factor 3 as "color emotion", and factor 4 as "shape emotion". User-centered service design is necessary for both smokers and non-smokers, to minimize the damage by smoke and to spend time for short break.

• Journal of Nutrition and Health
• /
• v.42 no.6
• /
• pp.505-515
• /
• 2009

Collagen is the major matrix protein in dermis and consists of proline and lysine, which are hydroxylated by prolyl hydroxylase (PH) and lysyl hydroxylase (LH) with cofactors such as vitamin C, oxygen, iron (Fe$^{2+}$), ketoglutarate and silicon. The collagen degradation is regulated by matrix metalloproteinase-1 (MMP-1), of which is the major collagen-degrading proteinase whereas tissue inhibitors of metalloproteinase-1 (TIMP-1) bind to MMP-1 thereby inhibiting MMP-1 activity. In this study, we investigated the effects of vitamin C, silicon and iron on mRNA, protein expressions of PH, LH, MMP-1 and TIMP-1. The physiological concentrations of vitamin C (0-100 $\mu$M), silicon (0-50 $\mu$M) and iron (Fe$^{2+}$：0-50 $\mu$M) were treated to human dermal fibroblast cells (HS27 cells) for 3 or 5days. The expression level of mRNA and protein was increased in not only PH but also LH when cells were incubated with vitamin C. A similar increase in LH mRNA or protein expression occurred when cells were incubated with silicon. Our results suggest that treatment of vitamin C and silicon increased mRNA and protein expression of PH and LH in human dermal fibroblast.