• 한국측량학회지
• /
• 제29권5호
• /
• pp.441-448
• /
• 2011

최근 디지털 항공사진을 이용한 수치도화가 보편화 되었으며 이로 인해 지표에 대한 3차원 데이터를 정확하게 획득하고 있다. 도화원도는 도화사가 지표를 육안으로 확인하여 제작한 신뢰 있는 3차원 데이터이며 등고선과 표고점 이외에도 지형지물에 대해 3차원 좌표를 가지고 있는 점, 선으로 표현되었을 뿐 아니라 레이어로 분류되어 활용성이 매우 크다. 본 연구에서는 도화원도를 이용해 정밀하고 정확한 수치표고모델을 제작하고자 한다. 이를 위해 수치지형도에서 등고선과 표고점 레이어를 추출하였고 도화원도에서 Break Line을 추출하여 각각 수치표고모델을 제작하였으며 이 두 결과를 비교하였다. 비교를 위해 주거지, 산지, 농경지, 제방 등 경사가 완만하거나 복잡한 지형을 연구지역으로 선정하여 최적의 수치표모델이 제작될 때까지 반복적으로 레이어를 삭제하면서 Break Line을 추출하였다. 그 결과 도화원도에서 등고선과 표고점 레이어를 비롯해 8개의 도로 레이어 및 2개의 경계 레이어를 Break Line으로 추출하였으며 이를 이용해 더욱 정밀한 수치표고모델을 획득할 수 있었다. 또한 교차하거나 접하는 Break Line을 편집하여 복잡하고 변위가 급격한 지형에서 수치표고모델의 왜곡현상을 최소화할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3256-3263
• /
• 2021

The main steam line break accident is an essential initiating event of the pressurized water reactor. In present work, the fuzzy set theory and the signal-based fault detection method has been used to detect the occurrence and diagnosis of the location and break area for the small scale MSLB. The models are validated by the AP1000 accident simulator based on MAAP5. From the test results it can be seen that the proposed approach has a rapid and proper response on accident detection and location diagnosis. The method proposed to evaluate the break area shows good performances for small scale MSLB with the relative deviation within ±3%.

• 한국작물학회지
• /
• 제32권2호
• /
• pp.163-172
• /
• 1987

동해안 냉조풍지대의 풍해상습지에 대한 방풍망설치방법과 설치시기에 의한 풍해 경감 효과를 구명하고자 1983년부터 1985년까지 3개년간 경북영덕지방에서 실시한 결과를 요약하면 다음과 같다. 1. 동해안 냉조풍지대의 1954년부터 1985년까지 32년 동안 강풍 발생빈도는 8월 10일부터 9월 10일 사이에 높아 이 지역의 수도 안전출수한계기는 8월 10일 이전 안전하다고 생각된다. 2. 이 지대에 주로 풍해를 유발시키는 바람은 태백산맥을 넘어오면서 휀(Fohn) 현상에 의한 고온건조한 편서풍과 해양에서 내륙으로 부는 한냉과습한 냉조풍이었으며 도작기간중 발생빈도가 각각 25 %였다. 3. 방풍망 설치에 따른 1차 효과는 감풍효과였으며 방풍망이 설치된 지점으로부터 1m에서는 23.9%, 10m에서는 35.8%, 20m에서는 26.9% 감풍효과가 있었으며 그 효과는 설치된 방풍망 높이의 10배 거리까지 있었다. 4. 방풍망 설치에 따른 2차 효과는 기온, 지온, 수온의 상승효과였으며 무방풍구에 비해 기온은 최고 0.7$^{\circ}C$, 최저 0.4$^{\circ}C$, 평균 0.1$^{\circ}C$ 상승되었으며 수온은 최고 0.3$^{\circ}C$, 최저 0.3$^{\circ}C$ 상승되었고 지온도 0.3$^{\circ}C$ 상승효과가 있었다. 5. 방풍망 설치에 따른 3차 효과는 생육촉진 감수경감, 품질향상의 효과가 있었으며 무방풍구에 비해 출수기가 2~5일 단축되었고 간장, 주당수수, 수당영화수, 임실율의 증가로 20~28% 증수효과가 있었으며 완전중의 비율도 높았다. 6. 벼알의 변색정도가 심할수록 등숙율과 정조 1,000 입중이 현저하게 떨어졌으며 그 감소정도와 부의 상관관계가 있었다. 7. 방풍망 설치방법별로는 한냉과습한 냉조풍과 고온건조한 편서풍을 모두 방풍할 수 있는 종합방풍시설이 가장 효과가 컸으며 방풍망 설치시기별로는 수잉기에 설치하는 것이 가장 효과가 컸다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제8권2호
• /
• pp.29-45
• /
• 1985

Computed Tomography Scanner (CT) is highly expensive in operation as well as purchasing. That reason may cause not only to increase the burden of patients but also to waste the capital resources leading to financial difficulties. However the numbers of CT installed throughout the country is increasing, because of efficiency in medical care, patient's concern, competitions among the hospitals within the same area. In the non-Metropolitan area the scanners were expected to be less utilized and less profitable. Nine hospitals equipped with the CT were studied on the utilization of that equipment during the period from November 1984 to February 1985 in non-Metropolitan area and break-even point in one hospital was analyzed for estimating profitabilities. The results were as follows ; 1. Among those nine hospitals, four hospitals had less than 400 beds, which is one of the restrictive minimum standards on the installation of Whole-body Computed Tomography Scanner. 2. The operating time during the normal operation period was longer than those of any other studies, but the accumulated down time was also longer than those of any other studies. The average number of scanning per week for each CT was 45, while the estimated number of for the break-even point was 56.7 cases. 3. When the downtime was excluded in calculating the average operation would be much closer to the cases for the break-even point. Therefore the break-down of the equipment was to be a main cause of the low profitability. 4. The average scanning rate for head area was 33.6%, however three of the nine hospitals showed about 20%. 5. If scanning ratio for the body parts excepting head was increased, the number of scanning for the break-even point would be diminished. 6. The small size hospital especially located near the Metropolitan area showed largest loss in the CT operation. In purchasing the highly expensive equipments in hospitals, demand should be taken into account and planning is recommended.

• Journal of Biosystems Engineering
• /
• 제10권2호
• /
• pp.27-35
• /
• 1985

This study was carried out to determine the optimum size and number of farm machines for various sizes of land coverage of the cooperative farm machinery utilization systems in Korea-namely Saemaul Mechanized Farming Group (SMFG). Fifty-one SMFG were selected from 8 counties in Chonnam province, and ownership, operation and management of farm machinery were surveyed. Annual covered area, cost and the break-even-point area of farm machinery were analyzed on the bases of the surveyed data and the present governmental subsidy policy, and then the optimum level of farm machinery ownership was determined. The results are summarized as follows: 1. The break-even-point areas of the tractors of 22-23ps, 28ps and 47-50ps were estimated as 12.1ha, 15.3ha and 21.6ha, respectively. The optimum size of a tractor for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 22-23ps, 28ps, and 47-50ps, respectively. 2. The break-even-point area of a rice transplanter was estimated as 3.3ha. The optimum numbers of rice transplanter for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3, and 4, respectively. 3. The break-even-point areas of a speed sprayer (attached on power tiller) and a power sprayer were estimated as 114.6ha and 15.3ha, respectively. The optimum numbers of power sprayer for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3 and 4, respectively. A speed sprayer is desirable for an area of more than 30ha coverage. 4. The break-even-point area of a combine was estimated as 10.7ha. The optimum numbers of combine for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 1,2, and 3, respectively.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.211-218
• /
• 1991

In this study, the break of the rotary blade which is occured from a stress concentration of the inside of blade by the outside impulsive load, is analyzed to 3-dimension used by the Freezing Photoelastic Method. These results are as follows. 1. The bending and compression stress are the greatest at the location of blade case. 2. The section area of 3cm-location from the blade case is the smallest, therefore, there are breaked 58% of all at this location and are proofed to the most danger section 3. The section area which by stress concentration of 3cm-location from blade case is caused by the production of blade, and it was higher danger of break than another location's. 4. In the location of 6cm and 9cm from the blade case, the bending stress has received a little and the section area has larger than another's, so it is not almost possible that the break at that location 5. In order to prevent of break, the external part which has contacted soil have to made tender for receiving a little stress and the internal part which received a large stress have to strengthen.

• Nuclear Engineering and Technology
• /
• 제33권1호
• /
• pp.12-24
• /
• 2001

The post-LOCA long term cooling (LTC) performance of the Korean Standard Nuclear Power Plant (KSNPP) is analyzed for both small break loss-of-coolant accidents (LOCA) and large break LOCA at cold leg. The RELAP5/MOD3.2.2 beta code is used to calculate the LTC sequences based on the LTC plan of the Korean Standard Nuclear Power Plants (KSNPP). A standard input model is developed such that LOCA and the followed LTC sequence can be calculated in a single run for both small break LOCA and large break LOCA. A spectrum of small break LOCA ranging from \ulcorner.02 to 0.5 k2 of break area and a double-ended guillotine break are analyzed. Through the code calculations, the thermal-hydraulic behavior and the boron behavior are evaluated and the effect of the important action including the safety injection tank (SIT isolation and the simultaneous injection in LTC procedure is investigated. As a result, it is found that the sufficient margin is available in avoiding the boron precipitation in the core. It is also found that a further specific condition for the SIT isolation action need to be setup and it is recommended that the early initiation of the simultaneous injection be taken for larger break LTC sequences.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.283-289
• /
• 2014

Purpose: This study was carried out to evaluate the labor requirement and the cost-reducing effects of the pick-up type pulse crop harvester compared with those of conventional harvesting for soybeans and red beans. Methods: The labor requirement and the cost to gather, thresh, and clean for conventional harvesting operations were surveyed; those for the pick-up type pulse crop harvester were estimated for soybeans and red beans. The annual capacity of the harvester and the break-even area of the two harvesting methods were also estimated. Results: For soybean harvesting, the labor requirement of 0.57 hour-persons/10 a for the pick-up type pulse crop harvester reflects a 91.9% reduction in the labor requirement of 7.00 hour-persons/10 a for conventional harvesting. Machinery costs of 51,300 won/10 a for the harvester were estimated for an annual harvesting area of 52.5 ha/year, representing a reduction of 33.3% from the 78,700 won/10 a cost of conventional harvesting. A break-even area of 28.4 ha was estimated for the two harvestings. For red bean harvesting, the labor requirement of 0.57 hour-persons/10 a for the harvester reflects a 92.6% reduction in the labor requirement of 7.66 hour-persons/10 a for conventional harvesting. For an annual harvesting area of 52.5 ha/year, annual capacity of 52.5 ha/year and machinery costs of 51,700 won/10 a were estimated for the harvester, reflecting a reduction of 44.7% in the cost of 93,500 won/10 a for conventional harvesting. A break-even area of 23.1 ha was estimated for the two harvestings. A governmental subsidy for purchasing the harvester could contribute to reducing the break-even area and harvesting costs. Conclusions: The pick-up type pulse crop harvester for soybean and red bean harvesting could reduce the labor requirement and costs of conventional harvesting, and a governmental subsidy for purchasing the harvester will improve the economics of the harvester for efficient mechanical harvesting.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.702-708
• /
• 2019

This paper deals with break size estimation of loss of coolant accidents (LOCA) using a nonlinear autoregressive with exogenous inputs (NARX) neural network. Previous studies used static approaches, requiring time-integrated parameters and independent firing algorithms. NARX neural network is able to directly deal with time-dependent signals for dynamic estimation of break sizes in real-time. The case studied is a LOCA in the primary system of Bushehr nuclear power plant (NPP). In this study, number of hidden layers, neurons, feedbacks, inputs, and training duration of transients are selected by performing parametric studies to determine the network architecture with minimum error. The developed NARX neural network is trained by error back propagation algorithm with different break sizes, covering 5% -100% of main coolant pipeline area. This database of LOCA scenarios is developed using RELAP5 thermal-hydraulic code. The results are satisfactory and indicate feasibility of implementing NARX neural network for break size estimation in NPPs. It is able to find a general solution for break size estimation problem in real-time, using a limited number of training data sets. This study has been performed in the framework of a research project, aiming to develop an appropriate accident management support tool for Bushehr NPP.

• 대한토목학회논문집
• /
• 제31권4B호
• /
• pp.333-341
• /
• 2011

본 연구에서는 RANS를 지배방정식으로 하는 3치원 수치모의를 이용하여 댐 붕괴로 인한 3차원적인 흐름 특징이 지배하는 댐 직하류에서 댐 붕괴파의 전파 현상, 특히 홍수파의 비정상성과 불연속성, 홍수파와 그 빈사파의 영향, 상류 및 사류 흐름의 혼재, 마른 하도에서의 전파, 이동상 수로에서의 전파와 같은 복잡한 현상을 포함하는 홍수파의 전파를 해석하였다. 부분 댐 붕괴로 인한 홍수파의 전파 해석과 90${\circ}$ 만곡을 가지는 실험수로에서의 홍수파 전파 해석에서는, 2차원 천수방정식을 지배방정식으로 사용하는 수치모의의 한계점으로 지적되었던 댐 붕괴 지점에서의 급격한 수위 변화와 저수지에서의 수위 진동 현상을 제대로 모의할 수 있었다. 또한 댐을 경계로 상류와 하류의 지형이 평행하거나 상류가 높은 또는 하류가 높은 계단형의 이동상 수로에서의 홍수파의 전파 및 하상변동을 성공적으로 모의할 수 있었다.