• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.105-116
• /
• 2011

No analytical solution exists for evaluating in-situ hydraulic conductivity of vertical cutoff walls by analyzing slug test results. Recently, an analytical solution to interpret slug tests has been proposed for a partially penetrated well in an aquifer. However, this analytical solution cannot be directly applied to the cutoff wall because the solution has been developed exclusively for an infinite aquifer instead of a narrow cutoff wall. To consider the cutoff wall boundary conditions, the analytical solution has been modified in this study to take into account the narrow boundaries by introducing the imaginary well theory. Two boundary conditions are considered according to the existence of filter cakes: constant head boundary and no flux boundary. Generalized steady-state shape factors are presented for each geometric condition, which can be used for evaluating the in-situ hydraulic conductivity of cutoff walls. The constant head boundary condition provides higher shape factors and no flux boundary condition provides lower shape factors than the infinite aquifer, which enables to adjust the in-situ hydraulic conductivity of the cutoff wall. The hydraulic conductivities calculated from the analytical solution in this paper give about 1.2~1.7 times higher than those from the Bouwer and Rice method, one of the semi-empirical formulas. Considering the compressibility of the backfill material, the analytical solution developed in this study was proved to correspond to the case of incompressible backfill materials.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.3
• /
• pp.207-215
• /
• 2020

Design of a shape transition nozzle is carried out as a part of building a lab-scale supersonic combustion experimental equipment. In order to connect directly the circular shaped vitiation air heater to the square shaped scramjet combustor, area change is evaluated by using the method of characteristics. Shape transition function is introduced to control the transition rate. Boundary layer correction was made through the three-dimensional computational fluid dynamics with the assessment on the several shape transition functions. The shape transition nozzle is proved minimizing the growth of boundary layer at the center of the rectangular nozzle surfaces that caused by the pressure gradient at the corners of the rectangular nozzle and the following recirculation regions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.79-87
• /
• 2013

An isogeometric topological shape optimization method is developed using the level sets and Heaviside enrichments. In the level set method, the initial domain is kept fixed and its boundary is represented by an implicit moving boundary embedded in the level set functions, which facilitates to handle complicated topological shape changes. The Heaviside enrichment improves the isogeometric analysis by adding some enrichment functions to model the internal boundaries. The proposed topological shape optimization method has several benefits: exact geometric models can be obtained using the isogeometric approach and the limitation of tensor-product patches can be overcome using the Heaviside enrichments to represent the internal voids. Even in a single patch, discontinuous displacement fields as well as smooth stress field can be obtained. Since the level sets offer the implicit moving boundary inside the domain, it is easy to represent the topological shape variations in the isogeometric analysis using Heaviside enrichments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.630-635
• /
• 2012

Nearfield acoustic holography method predicts an unmeasured sound field, therefore it depends on its prediction methods. In particular, if one has radiators or scatters, which cannot be expressed by simple geometry, then inverse boundary element method (BEM) is normally employed to reconstruct the sound field induced by sound sources with irregular profiles. The characteristics of boundary element, including the element shape, characteristic length, order of shape function and others, affect the reconstruction error. Investigating the errors by means of changing these factors will provide a guide line for selecting appropriate factors, associated with the elements of BEM. These factors are investigated by numerical simulations, and the accuracies with respect to the variant factors are compared. Novel suggestions for selecting appropriate boundary element factors are described based on the simulation results.

• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1531-1539
• /
• 2004

In this paper, we propose an efficient method for locating human lips. Based on Point Distribution Model and Principle Component Analysis, a lip shape model is built. Lip boundary model is represented based on the concatenated gray level distribution model. We calculate the distribution of shape parameters using Gaussian mixture. The problem to locate lip is simplified as the minimization problem of matching object function. The Down Hill Simplex Algorithm is used for the minimization with Gaussian Mixture for setting initial condition and refining estimate of lip shape parameter, which can refrain iteration from converging to local minima. The experiments have been performed for many images, and show very encouraging result.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.5
• /
• pp.187-194
• /
• 2014

Prostate cancer is a malignant tumor occurring in the prostate. Recently, the repetition rate is increasing. Image inspection method which we can check the prostate structure the most correctly is MRI(Magnetic Resonance Imaging), but it is hard to apply it to all the patients because of the cost. So, they use mostly TRUS(Transrectal Ultrasound) images acquired from prostate ultrasound inspection and which are cheap and easy to inspect the prostate in the process of treating and diagnosing the prostate cancer. Traditionally, in the hospital the doctors saw the TRUS images by their eyes and manually segmented the boundary between the prostate and nonprostate. But the manually segmenting process not only needed too much time but also had different boundaries according to the doctor. To cope the problems, some automatic segmentations of the prostate have been studied to generate the constant segmentation results and get the belief from patients. In this study, we propose an average shape model to segment the prostate boundary in TRUS prostate image. The method has 3 steps. First, it finds the probe using edge distribution. Next, it finds two straight lines connected with the probe. Finally it puts the shape model to the image using the position of the probe and straight lines.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.266-274
• /
• 2003

Distance Fourier descriptors of local target boundary and feature information fusion using multiple MLPs (Multilayer perceptrons) are proposed. They are used to identify nonoccluded and partially occluded targets in natural FLIR (forward-looking infrared) images. After segmenting a target, radial Fourier descriptors as global shape features are defined from the target boundary. A target boundary is partitioned into four local boundaries to extract local shape features. In a local boundary, a distance function is defined from boundary points and a line between two extreme points. Distance Fourier descriptors as local shape features are defined by using distance function. One global feature vector and four local feature vectors are used as input data for multiple MLPs to determine final identification result of the target. In the experiments, we show that the proposed method is superior to the traditional feature sets with respect to the identification performance.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.3
• /
• pp.207-214
• /
• 2000

For last 20 years, a number of researches and developments on finite element mesh generation has been carried out and most of them are comported of node generation part and node generation part. However these algorithms are inefficient in mesh veneration process and difficult to control the shape of elements when comparing with the generation of nodes and elements concurrently. In this study, therefore, an algorithm it proposed to generate nodes and elements concurrently for various two-dimensional objects having multiple holes. Inner node generation is performed by choosing three consecutive boundary nodes and comparing them with other close boundary nodes. As soon as inner nodes are determined, element generation is conducted based on the comparison of the distances among the generated inner nodes, three consecutive boundary nodes and other close boundary nodes. the generated element nodes become new boundary nodes for further repeated process. The processes are repeated through out each region until three consecutive boundary nodes finally form a tirangular element.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.3 s.5
• /
• pp.71-79
• /
• 2002

The purpose of this paper is to study the buckling characteristics of elliptical latticed domes under conservative loading conditions. The latticed domes are usually designed in geometrically spherical shape. For this type of latticed domes, many researchers have researched and even the simplified estimation codes for the buckling load level have been available. However, geometrically elliptical latticed domes have been often constructed, and show different buckling characteristics following with geometrical parameters as rise-to-span ratio and so on. Therefore, it is necessary to investigate the general tendency of buckling characteristics of the elliptical latticed domes. In this paper, to find out some buckling characteristics of elliptical latticed domes, height, boundary configuration and gap are used as the shape coefficients. For each model with different parameters, the eigen values and the buckling loads are evaluated.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.2
• /
• pp.12-17
• /
• 2010

A kind of disk-shape boundary layer pump is designed numerically by using a software of computational fluid dynamics, which is widely used for the special purposes such as artificial hearts, bio-fluidics and transportation of oceanic lives, etc. From the numerical simulation with an axisymmetric model, some benchmark problems are tested and compared with experimental results. The performance of disk pump is graphically visualized from the computational results, and converted to the dimensionless parameters. Finally, the obtained numerical data in the present investigation can be used for the baseline for new design to achieve a more efficient disk pump.