• 한국항공우주학회지
• /
• 제42권12호
• /
• pp.1028-1036
• /
• 2014

연구에서는 MOC 및 CFD를 이용한 극초음속 노즐 설계 절차를 수립하였다. MOC를 이용하여 설계된 비점성 노즐 형상에 대하여, 점성 유체 전산 해석을 통하여 경계층 두께를 산출하여 노즐 형상을 보정하였다. 여러 가지의 경계층 두께 정의를 비교한 결과, 노즐 단면 최대 속력의 95% 속력을 가지는 경계층 두께의 정의가 설계 마하수를 가장 잘 만족하는 것으로 여겨진다. 노즐 설계과정은 MOC 설계에 대한 격자 형성, 비점성 해석 및 점성 해석, 경계층 보정 및 점성 해석에 의한 확인 및 결과 도출의 순서로 진행되며, 모든 과정은 자동 일괄 처리토록 작성되었다.

• Spatial Information Research
• /
• 제11권4호
• /
• pp.421-437
• /
• 2003

전산화된 지적도를 그대로 사용하여 필지경계점 위치, 필지면적, 필지경계선의 길이를 계산하고, 법적으로 유효한 도면으로 사용하기 위해서는 왜곡을 보정하여야 한다. 왜곡보정방법으로서 4 도곽점을 이용한 2차원부등각변환법, 지적도를 9개의 영역으로 분할하는 방법, 세부측량원도를 이용하는 방법, 도곽선을 직선화하면서 보정하는 방법들이 연구되었다. 본 연구에서는 이 네가지 보정방법을 지적도에 적용하여 필지경계점의 위치 보정을 하고, 그 보정의 정확도를 비교 분석하였다. 불규칙적으로 일어난변형을 완전하게 보정할 수는 없으나, 4 도곽점을 이용하여 2차원투영변환으로 보정한 후 도곽선 직선화에 의한 보정을 추가하는 것이 왜곡을 최소화할 수 있는 방안으로 판단되었다.

• Wind and Structures
• /
• 제16권1호
• /
• pp.25-46
• /
• 2013

This paper presents a boundary-layer wind tunnel (BLWT) study on the effect of variable dominant openings on steady and transient responses of wind-induced internal pressure in a low-rise building. The paper presents a parametric study focusing on differences and similarities between transient and steady-state responses, the effects of size and locations of dominant openings and vent openings, and the effects of wind angle of attack. In addition, the necessity of internal volume correction during sudden breaching, i.e., a transient response experiment was investigated. A comparison of the BLWT data with ASCE 7-2010, as well as with limited large-scale data obtained at a 'Wall of Wind' facility, is presented.

• Journal of Information Processing Systems
• /
• 제9권1호
• /
• pp.89-102
• /
• 2013

The paper presents a fuzzy based impulse noise filter for both gray scale and color images. The proposed approach is based on the technique of boundary discriminative noise detection. The algorithm is a multi-step process comprising detection, filtering and color correction stages. The detection procedure classifies the pixels as corrupted and uncorrupted by computing decision boundaries, which are fuzzified to improve the outputs obtained. In the case of color images, a correction term is added by examining the interactions between the color components for further improvement. Quantitative and qualitative analysis, performed on standard gray scale and color image, shows improved performance of the proposed technique over existing state-of-the-art algorithms in terms of Peak Signal to Noise Ratio (PSNR) and color difference metrics. The analysis proves the applicability of the proposed algorithm to random valued impulse noise.

• 대한기계학회논문집
• /
• 제4권3호
• /
• pp.113-118
• /
• 1980

Stresses were calculated for finite-width orthotropic laminates with a circular hole and remote uniaxial loading using a two-dimensional finite-element analysis with both uniform stress and uniform displacement boundary conditions. Five different laminates were analyzed: quasi-isotropic [0.deg./.+-.45.deg./90.deg.].$\_$s/, 0.deg., 90.deg., [0.deg./90.deg.]$\_$s/, and [.+-.45.deg.]$\_$s/, Computed results are presented for selected combinations of hole diameter-sheet-width ratio d/w and length-to width ratio L/w. For small L/w values, the stress-concentration factors K$\_$tn/ were significantly different for the uniform stress and uniform displacement boundary conditions. Typically, for the uniform stress conditions, the K$\_$tn/ values were much larger than for the infinite-strip reference conditions; however, for the uniform displacement conditon, they were only slighty smaller than for this reference. The results for long strips are also presented as width-correction factor. For d/w.leg.33, these width-correction factors are nearly equal for all five laminates.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.231-233
• /
• 2008

본 논문은 전류경계영역(Boundary Conduction Mode:BCM) 역률개선(Power Factor Correction:PFC) 플라이백 Converter의 전류 대신호 모델을 제시하였다. 역률개선 플라이백 Converter의 Small Signal Model을 확립하였으며, 60W급 전원회로의 구현을 통해 제안된 모델링의 유용성을 검증하였다.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.92-97
• /
• 1999

This paper reports by simple method that is quickly corrected the effects of fluid temperature for the hot wire anemometer. We are concerned with a variable output of hot wire anemometer on arbitrary fluid temperature. Hot wire by measuring boundary layer of turbulent flow has been calibrated by arbitrary temperature lower than 10$0^{\circ}C$, and velocity lower than 20m/s. As a result, we could pick up the temperature factor affected by output of hot wire anemometer from related in output of arbitrary temperature to output of room temperature. By using temperature factor on the output of hot wire anemometer, we also obtained that the relationship of velocity was of no effect by temperature of fluids. About results of calibrated hot wire, uncertainly of velocity is 2.15% at room temperature and 3.1% at arbitrary temperature.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.873-876
• /
• 2002

It has been reported that discrepancies exist in the case of double panels with an air layer when the measured sound transmission loss is compared with the calculated values. It has been known that the cause of this discrepancy is in major from the unavoidable dips associated with the double wall resonances. In this work, several correction methods to make up for such resonances are studied. In particular, the ‘boundary damping’concept is revisited and its effects are discussed by comparing with measured values. It is shown that the correction methods are necessary for the sound insulation analysis of double partitions with an air layer, in order to ascertain the quantitative correlation between measured and predicted values.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2312-2325
• /
• 2013

In this paper, we propose a preprocessing method that it is to correct the distortion of text area in Korean signboard images as a preprocessing step to improve character recognition. Distorted perspective in recognizing of Korean signboard text may cause of the low recognition rate. The proposed method consists of four main steps and eight sub-steps: main step consists of potential vertical components detection, vertical components detection, text-boundary estimation and distortion correction. First, potential vertical line components detection consists of four steps, including edge detection for each connected component, pixel distance normalization in the edge, dominant-point detection in the edge and removal of horizontal components. Second, vertical line components detection is composed of removal of diagonal components and extraction of vertical line components. Third, the outline estimation step is composed of the left and right boundary line detection. Finally, distortion of the text image is corrected by bilinear transformation based on the estimated outline. We compared the changes in recognition rates of OCR before and after applying the proposed algorithm. The recognition rate of the distortion corrected signboard images is 29.63% and 21.9% higher at the character and the text unit than those of the original images.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1678-1683
• /
• 2003

Some characteristics of the sensitivities of the eigenvalues for beams have been found in the paper. For cantilever beams and simply supported beams, the sensitivities of the eigenvalues to the stiffness correction factor of one element are equal and opposite to the sensitivities to the mass correction factor of the symmetrically positioned element. The relationship means that to increase stiffness in one element has the same effects on the eigenvalues as to decrease mass by the same proportion in the symmetrically positioned element. For beams with other boundary conditions, however, the relationship does not hold.