• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.45-52
• /
• 2005

Recent observations based on geological evidence and laboratory tests confirm that complex segmentation of hydraulic fractures is common phenomena. It is expected that the segmentation causes mechanical interaction between the fractures and affects fracture opening and measured net pressure. In this study, therefore, the opening of the fractures is computed using boundary collocation method to evaluate the mechanical interaction quantitatively. Also, improved boundary collocation method is suggested to evaluate the displacement of the fracture wall accurately and the reliability of this method is confirmed by comparing with that of the finite element method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.117-124
• /
• 2009

The p-convergent boundary element method has been proposed to analyze two-dimensional potential problem on the basis of high order Legendre shape functions that have different property comparing with the shape functions in conventional boundary element method. The location of nodes corresponding to high order shape function are not defined along the boundary, called by nodeless node, similar to the p-convergent finite element method. As the order of shape function increases, the collocation point method is used to solve linear simultaneous equations. The collocation patterns of p-convergent boundary element method consist of non-symmetric hierarchial or symmetric non-hierarchical. As the order of shape function increases, the number of collocation point increases. The singular integral that appears in p-convergent boundary element has been calculated by special numeric quadrature technique and semi-analytical integration technique. The L-shape domain problem including singularity in the vicinity of reentrant comer is analyzed and the numerical results show that the relative error is smaller than $10^{-2}%$ range as compared with other results in literatures. In case of same condition, the symmetric p-collocation point pattern shows high accuracy of solution.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.31-37
• /
• 1999

This paper describes the far-field estimation using the near-field measurement data. Measurement in far-field region gives us the acoustical characteristics of the source but in general measurement is made in near-field such as acoustic water tank or anechoic chamber, so far-field acoustical characteristics of the source should be predicted from near-field data. In this case, the number of measurement points in the near field which relates to the accuracy of the predicted field and the amount of data processing, should be optimized. Existing papers say that measurement points is proportional to kL and depends on geometry and directivity of the source. But they do not give us any definite criterion for the required number of measurement points. Boundary Collocation Method which is one of the far-field prediction methods, is analyzed based on Helmholtz integral equation and Green function and it has been found that the number of measurement points is optimized as 0.54kL which is about one half of the existing results.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.93-100
• /
• 2005

The occurrence of multi-segmented hydraulic fractures that show different behavior from the single fracture is common phenomenon. However, it is not easy to evaluate the behavior of multiple fractures computed by most numerical techniques because of complicated process computation. This study presents how to efficiently calculate the displacement of the multi-segmented hydraulic fractures using the boundary collocation method (BCM). First of all, asymptotic solutions are obtained for the closely spaced overlapping fractures and are compared with those by the BCM where the number of collocation points is varied. As a result, the BCM provides an excellent agreement with the asymptotic solutions even when the number of collocation points is reduced ten times as many as that of conventional implementations. Accordingly, the numerical simulation of more realistic and, hence, more complex fracture geometries by the BCM would be valid with such a significant reduction of the number of collocation points.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.2
• /
• pp.595-612
• /
• 2014

The spectral collocation method for a second order elliptic boundary value problem on a domain ${\Omega}$ with curved boundaries is studied using the Gordon and Hall transformation which enables us to have a transformed elliptic problem and a square domain S = [0, h] ${\times}$ [0, h], h > 0. The preconditioned system of the spectral collocation approximation based on Legendre-Gauss-Lobatto points by the matrix based on piecewise bilinear finite element discretizations is shown to have the high order accuracy of convergence and the efficiency of the finite element preconditioner.

• Journal of applied mathematics & informatics
• /
• v.8 no.1
• /
• pp.129-136
• /
• 2001

We introduce and discuss a new numerical method for solving system of second order boundary value problems, where the solution is required to satisfy some extra continuity conditions on the subintervals in addition to the usual boundary conditions. We show that the present method gives approximations which are better than that produced by other collocation, finite difference and spline methods. Numerical example is presented to illustrate the applicability of the new method. AMS Mathematics Subject Classification : 65L12, 49J40.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.4
• /
• pp.180-183
• /
• 2004

This paper presents a description of the point collocation method and its application to the electromagnetic field computation. The interpolation scheme is based on the fast moving least square reproducing kernel approximation. In the method, the integration cell is not required and the essential boundary conditions can be enforced directly. Numerical simulations on 1-D and 2-D problems are carried out to validate the method. It is found that computational efficiency is higher than the general mesh-free methods.

• Structural Engineering and Mechanics
• /
• v.76 no.4
• /
• pp.435-449
• /
• 2020

This work presents the formulation of the isogeometric collocation method to solve the strong form equation of a unified and integrated approach of Reissner Mindlin plate theory (UI-RM). In this plate theory model, the total displacement is expressed in terms of bending and shear displacements. Rotations, curvatures, and shear strains are represented as the first, the second, and the third derivatives of the bending displacement, respectively. The proposed formulation is free from shear locking in the Kirchhoff limit and is equally applicable to thin and thick plates. The displacement field is approximated using the B-splines functions, and the strong form equation of the fourth-order is solved using the collocation approach. The convergence properties and accuracy are demonstrated with square plate problems of thin and thick plates with different boundary conditions. Two approaches are used for convergence tests, e.g., increasing the polynomial degree (NELT = 1×1 with p = 4, 5, 6, 7) and increasing the number of element (NELT = 1×1, 2×2, 3×3, 4×4 with p = 4) with the number of control variable (NCV) is used as a comparable equivalent variable. Compared with DKMQ element of a 64×64 mesh as the reference for all L/h, the problem analysis with isogeometric collocation on UI-RM plate theory exhibits satisfying results.

• Journal of the Chungcheong Mathematical Society
• /
• v.7 no.1
• /
• pp.141-152
• /
• 1994

We consider a numerical scheme for solving a nonlinear boundary integral equation (BIE) obtained by reformulation the nonlinear boundary value problem (BVP). We give a simple alternative to the standard collocation method for the nonlinear BIE. This method consists of one conventional linear system and another coupled linear system resulting from an auxiliary BIE which is obtained by differentiating both side of the nonlinear interior integral equations. We obtain an analogue BIE through the perturbation of the fundamental solution of Laplace's equation. We procure the super-convergence of approximate solutions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.103-110
• /
• 1987

When a crack in the plate with a circular hole approaches to the hole, the large stress concentration phenomenon appears at the boundary of the circular hole and the crack tip. As a numerical analysis method for the stress concentration in a structure, the Finite Element Method has been used. In this paper, however, the Boundary Element Method is employed, which may reduce the numbers of input data and the calculating time when compared with the Finite Element Method. A finite flat plate having a crack between the two circular holes is chosen as a model in this study. The results by the Boundary Element Method are compared with those of the Boundary collocation Method by Newman, which are already well established. And the structural behavior near the circular hole and at the crack tip is also investigated.