• 한국기계가공학회지
• /
• 제10권1호
• /
• pp.87-92
• /
• 2011

This article proposes a new technique of the dynamic model using multi-body dynamic analysis tool for a flexible main spindle rotor system with a novel phase adjusting control technique for the purpose of an active control of rotor vibration. The dynamic model is used as a plant model. Also in order to make control system, a component parameters and phase controller is composed and simulated by SIMULINK. The vibration is reduced to 50%. Therefore the ADAMS dynamic model for the flexible main spindle rotor and the phase adjusting control techniques may be effective for the suppressing the vibration and helpful for the future active control for rotor vibration.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.411-417
• /
• 2017

In this study, Sunroot was used as material in the fermentation process. Sunroot are widely distributed in Korea, The main component is composed of inulin. Fermented vinegar stimulates digestion in the body, as well as to relieve stress is a cause of increasing the neurotransmitter-Serotonin of the body. Therefore, we conducted fermentation studies using sunroot. This research conducted seven days, and the pH and brix value analysis was done every 12 hours during fermentation process. The experimental results show that the fermentation product under blender treatment is better than cutting treatment and without cutting treatment. Initial brix 25% is the best treatment for fermentation because produce fermentation product with a good taste and aroma than other treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.75-77
• /
• 2005

When measuring impedance of electronic component and so on, even the small size can reject the interference to shielding object. But, the interference through human body is grown when measuring bioimpedance without establishing shield specially. Consequently, when measuring bioimpedance in this paper, it proposed impedance measurement method to take advantage of spread spectrum technology, so that can reject the interference without establishing shield specially. Spread spectrum impedance measurement method to propose in this paper can reject the interference signal that occurring from medical instruments in the human body, the interference signal that is flowed in from surrounding environment when measuring impedance. It improved SJR(signal to jamming ratio) about 22dB than conventional method that actually realize and experiment spread spectrum impedance measurement method.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1133-1145
• /
• 2000

It is necessary to develop an efficient analysis method to identify the dynamic characteristics of a large mechanical structure and update its finite element model. That is because these processes need the huge computation of a large structure and iterative estimation due to the use of the first- order sensitivity. To efficiently carry out these processes, a new method, called the generalized free-interface mode sensitivity method, has been proposed in the authors' preceeding paper. This method is based on substructuring approach such as a free-interface method and a generalized synthesis algorithm. In this paper, the proposed method is applied to the model updating of a car body structure to verify its accuracy and reliability for a large mechanical structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.474-478
• /
• 1992

The non-rational transfer function of a Bernoulli-Euler beam, as an important component of a flexible structure, is analyzed. The true pattern of zeros of that transfer function is investigated as a function of sensor and actuator seperation. Translational displacement sensors are used for two cases in which a force input and a moment input are seperately applied. When the displacement sensor is located at a certain point, the first pair of zeros on the real axis of the s-plane arrive at the origin and cancel the rigid-body mode. The location of the translational displacement sensors on the beamat which the rigid-body mode of the beam is unobservable is analyzed as the center of percussion and is uniquely located for each case. If sensor is moved beyond such a point, a pair of zeros appear on the imaginary axis and move away from the origin along the imaginary axis of the s-plane.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권2호
• /
• pp.124-132
• /
• 2013

This study investigated the feasibility of gait recognition using points on the body in three-dimensional (3D) space based on comparisons of four different feature vectors. To obtain the point trajectories on the body in 3D, gait motion data were captured from 10 participants using a 3D motion capture system, and four shoes with different heel heights were used to study the effects of heel height on gait recognition. Finally, the recognition rates were compared using four methods and different heel heights.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.425-426
• /
• 2006

This study proposes a new simulation method of high speed rotor system with the dynamic model using multi body dynamic analysis tool and with a new phase modulating technique as a system control algorithm. A dynamic model of high speed rotor system was built by, ADAMS, commercial multi body dynamic program. The phase modulating technique is a new control algorithm for a rotor system. This algorithm can control system using an adaptive proportional gain and an adaptive phase which are obtained from periodical input signal. To make control system, a ADAMS model and component parameters and phase controller was composed by Matlab Simulink And simulate it.

• 센서학회지
• /
• 제22권3호
• /
• pp.219-222
• /
• 2013

The exhaled breath contains gases generated from human body. When disease occurs in the body, exhaled breath may include gas components released from disease metabolism. If we can find specific elements through analysis of the exhaled gases, this approach is an effective way to diagnose the disease. The lung function has a close relationship with exhalation. Exhaled gases from COPD (Chronic Obstructive Pulmonary Disease) patients can be analyzed by gas chromatography-mass spectroscopy (GC-MS) and a gas sensor system. The exhaled breath for healthy person and COPD patients had different components. Significantly more benzendicarboxylic acid was detected from COPD patients than in healthy persons. In addition, patients had a variety of decane. Phosphorous compounds with different isomers were detected from patients. The results obtained by gas sensor system were processed by PCA (Principal Component Analysis). The PCA results revealed distinct difference between the patients and healthy people.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권11호
• /
• pp.1527-1530
• /
• 2002

Factor analysis was applied to the phenotypic correlation matrix of 15 linear type traits (scored linearly 1 to 50 points) for 2035 Holstein cows of 38 sires computed from data collected between 1988 and 1992 in Beijing Shuangqiao Farm and Beijing Xijiao Farm. The 15 linear type traits were stature, body strength, body depth, dairy form, rump angle, rump length, rump width, rear leg side view, foot angle, fore udder attachment, rear udder height, rear udder width, udder cleft, udder depth and teat placement rear view. The first four components accounted for 49.1% of the total variance in type scores. Factor 1 reflected strong cows, with deep bodies, with long and wide rumps, and tall in stature. Factor 2 reflected cows with well attached fore udders, wide rear udders and whose udders were supported by strong suspensory ligaments with close teat placement. Factor 3 reflected cows with good dairyness, sickled in the hocks, high rear udders and udder floors above the hocks. Factor 4 reflected cows with sloping rumps from hooks to pins and with steep foot angle. Principal component and factor analyses are useful to clarify the relationships among type traits.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.89-94
• /
• 2006

다성분 탄성파 자료의 신호/잡음비를 높이기 위한 방법의 일환으로 다성분 복소트레이스 분석법을 이용한 분극필터를 개발하였다. 이 필터는 기존의 방법과는 달리, 실체파 신호의 수평/수직 진폭비와 레일리파 타원율을 이용하여 각 시간 샘플의 선형 및 타원형 성분이 정량적으로 계산되며 낮은 신호/잡음비에도 이상적으로 작동하는 특징이 있다. 합성파 뿐만 아니라 실제 자료에 적용시킨 결과, 기존 분극필터보다 타원형 입자운동의 레일리파가 잘 제거되어 선형의 P파 및 S파 신호를 효과적으로 인지할 수 있음을 보인다.