• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1615-1620
• /
• 2010

A thin film thermoelectric cooler for COB direct assembly was proposed and the COB cooler structure was modeled by electrical equivalent circuit by using SPICE model of thermoelectric devices. The embedded cooler attached between the die chip and metal plate can offer the possibility of thin film active cooling for the COB direct assembly. We proposed a driving method of TEC by using pulse width modulation technique. The optimum power to the TEC is simulated by using a SPICE model of thermoelectric device and passive components representing thermal resistance and capacitance. The measured and simulated results offer the possibility of thin film active cooling for the COB direct assembly.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.19-22
• /
• 2004

In this paper, we present a way that can implement the vector control Algorithm of induction motor and PWM signal generation on the basis of Matlab Simulink environment. The overall system model is designed by Simulink toolbox for vector control of induction motor, and then implement experiment with the DS1103 board of dSPACE. Although we are not coding the system, it is capable of doing simulation and experiment simultaneously. That is why Matlab and dSPACE board compiler can generate the '*.c' and '*.obj' files on the designed system automatically. After considering about hardware structure and driving system in Ds1103 board we verify the availability of Proposed method through in a comparison/analysis between simulation and experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.685-691
• /
• 1993

This paper introduces a PC-based image data processing unit that is composed of preprocessor board and main processor board; The preprocessor contains Inmos A110 processor and efficient H/W architecture for fast mask/logic operations at the speed of video signal rate. It is controlled by the main processor which communicates with the host PC. The main processor board contains TI TMS320C31 digital signal processor, and can access the frame memory of the processor for extra S/W tasks. We test 3*3, 5*5 masks and logic operations on 386/486/DSP and compare the result with that of the proposed unit. The result shows ours are extremely faster than conventional CPU based approach, that is, over several hundred times faster than even DSP.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.645-648
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to rahmen structures. With like this reason, dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are as follows. structure 1 satisfy domestic standard concerned with sound insulation between households at the laboratory and field test.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.1
• /
• pp.33-37
• /
• 2008

This paper describes the development of a new $5.0{\times}3.2mm$ SAW filter bank which is consist of 12 L, C matching components and 4 SAW bare chips on PCB substrate with CSP technology. We improved the manufacturing cost by removing the ceramic package through direct flip bonding of $LiTaO_3$ SAW bare chip on PCB board after mounting L, C passive element on PCB board. After that we realized the hermitic sealing by laminating the epoxy film. To confirm the confidentiality and durability of the above method, we have obtained the optimum flip bonding & film laminating condition, and figured out material property and structure to secure the durability & moisture proof of PCB board. The newly developed super mini $5.0{\times}3.2mm$ filter bank shows the superior features than those of existing products in confidence, electrical, mechanical characters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1379-1382
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to moment structures. With like this reason dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-hearing light weight concrete Panel using bottom ash, the Purpose of this study is to obtain basic data for application in the field. The results are that the structure 1 satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.11a
• /
• pp.63-67
• /
• 1997

The ISO(International Standard Organization) has standardized MPEG-2 audio. The MPEG-2 audio compression algorithm is based upon subband analysis and exploits the human auditory characteristics to achieve a low bit rate with minimum perceptual loss of audio signal quality. This thesis presents an enhanced MPEG-2 audio encoder using multiple TMS320C30 general purpose DSP's. The developed system is made up of five slave boards and one master board. Each slave board performs susband analysis psychoacoustic parameter calculation for one channel, and the master board manages bit allocation, quantization, and bit-stream formatting for all channels. Parallel processing and pipelining techniques are used in hardware structure and fast algorithms are applied in each subroutine to implement a real-time process. The implemented system supports multichannel up to 5.1 and various bitrates.

• Journal of the Korean Society for Railway
• /
• v.3 no.2
• /
• pp.92-99
• /
• 2000

Composites are very useful material for light train carbody due to its high specific strength and lightweight characteristics. The composites, called 3-D board, are developed with a special stitching method. In this process, the glass fiber fabrics of skin material and foam core material are stitched together with glass fiber thread. The glass thread in Z-axis turns into FRP form. The conventional delamination problem can be solved with 3-D sandwich structure. In addition, with the lower density of foam, the weight of the panel and the operation expenses can be highly reduced. To evaluate the usefulness of the 3-D board, the double-deck light train carbody is studied. The stress analyses are carried out under various loads and boundary conditions with FEM Code, ANSYS. On comparing with the aluminum carbody, 3-D board carbody can be reduced by about 2 ton for the total weight of carbody.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.335-342
• /
• 2006

This paper is to develop an integrated LAN unit (hereinafter called ILU) which connects the transformed signals from on-board equipments with the information display unit and vice versa In developing the ILU, the topology, transfer mode, and protocol was inspected considering the structure and characteristics of a related ship. The principle of development was determined type. Finally the ILU appropriate for the ship's characteristics was designed and developed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.113-120
• /
• 2006

This paper is to develop an integrated LAN unit (hereinafter called ILU) which connects the transformed signals from on-board equipments with the information display unit and vice versa. In developing the ILU, the topology, transfer mode, and protocol was inspected considering the structure and characteristics of a related ship. The principle of development was determined type. Finally the ILU appropriate for the ship's characteristics was designed and developed.