• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.294-294
• /
• 2015

하천과 해양에서 발생한 수질오염은 특성상 유속의 흐름에 따라 광범위하며 급속도로 퍼져나가기 때문에 이를 효율적으로 유지, 관리하기 위해서는 오염인자들에 대한 모니터링이 수행되어야 한다. 원격탐사 기술을 이용한 하천의 수질측정은 대규모지역으로 분포해있는 수질농도의 변화양상을 시 공간적으로 모니터링 하는 것이 가능하게 할 뿐 아니라, 사람이 접근하기 어려운 지역에는 직접취수를 하지 않음으로써 기존의 수질측정방법들에 비해 편의성을 높여 시간적, 경제적 측면에서 효율적이다. 이에 본 연구에서는 최근 수질오염이 심화되고 있는 낙동강유역을 대상으로 인공위성 이미지영상을 이용하여 수질인자들의 농도측정을 수행하였다. 연구를 위해 사용된 인공위성은 NASA와 USGS가 공동으로 운용중인 Landsat 8 인공위성이다. Landsat 8의 11개 band 중 band2(Blue), band3(Green), band4(Red), band5(Near Infrared)를 사용하여 실제로 측정된 지점자료와 인공위성자료간의 상관관계를 규명하였다. 사용된 인공위성자료는 지점자료 날짜를 포함하는 총 4개의 연구날짜(2013/10/27, 2013/11/12, 2014/04/14, 2014/05/16)에 해당하는 위성이미지영상이다. Pearson상관계수를 통한 밴드와 수질인자간의 상관 결과, 본 연구지역에서는 $0.85-0.88{\mu}m$(band5)의 파장영역에서 클로로필-a와 부유물질이 가장 민감하게 반응함을 알 수 있었다. 두 수질인자들은 band2, band3, band4에서도 비교적 높은 상관성을 보였으며, 이를 근거로 band combination, band ratio를 통해 클로로필-a와 부유물질의 회귀모델식을 유도하였다. 각각의 회귀모델식은 실제 측정된 데이터들과 비교 검증을 통해 4개의 연구기간 중 2013년 10월 27일, 2014년 5월 16일에 대해서 클로로필-a와 부유물질의 공간적인 분포양상을 시각적으로 도시화하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.63-67
• /
• 1991

Amorphous silicon films were deposited on glass, [100] single crystal silicon wafer with thermally grown silicon dioxide, and [100] silicon wafer substrates by Plasma Enhanced Chemical Vapor Deposition(with argon diluted silane source gas). Growth rate, UV optical band edge, and the hydrogen quantity in the amorphous silicon films have been investigated as a function of the preparation conditions by measuring film thickness, UV-absorbency, and FT-IR transmittance. The growth rate of the ${\alpha}$-Si:H films increases with increasing substrate temperture, flow rate and R.F. power density. The UV optical band edge shifts to blue with the increases in the deposition pressure. Increasing substrate temperature shifts the UV optical band edge of the films to red. Hydrogen quantity in the ${\alpha}$-Si:H films increases with an increases in the R.F. powr and decreases with an increase in the substrate temperature.

• 전기화학회지
• /
• 제12권3호
• /
• pp.234-238
• /
• 2009

In the excitation spectra of $YNbO_4$ : $Eu^{3+}$, the charge transfer (CT) band around 270 nm due to $[NbO_4]^{3-}$$-Eu^{3+}$ interaction and sharp excitation peaks by f-f transition of $Eu^{3+}$ strongly appeared simultaneously. CT band depended on the structural properties of powders, showing the red-shift with increasing the crystallinity, while the f-f transition peaks were independent of the crystallinity. For $YNb_{1-x}Ta_xO_4$ : $Eu^{3+}$ (x = 0.05.0.2), $[TaO_4]^{3-}$. configuration was locally constructed, leading to the blue-shift in CT band and the decrease in the red emission intensity with increasing the Ta content.

• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.139-143
• /
• 1997

The photoluminescence characteristics of the zinc gallate have been investigated as a function of the composition and the firing atmosphere. Two distinct emission bands were observed whose peaks are 360 nm and 430 nm respectively. These emission bands are considered to be from two different emission centers. For $ZnO/Ga_2O_3$=49.3/50.7 or higher, 430 nm band is predominant and for $ZnO/Ga_2O_3$=49.2/50.8 or lower, 360nm band becomes predominant, whereas 430 nm band is almost completely suppressed. The shift of emission peak is though to be due to the change of the cation distribution with the zinc content in the spinel zinc gallate. Also, the emission centers responsible for the 360nm band are considered to be more efficient energy absorbers than the ones for the 430 nm band. Highly efficient green emitting phosphor was obtained by activating Zn-deficient zinc gallate with manganeses.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.359-363
• /
• 2004

Photoluminescence excitation (PLE) spectroscopy studies were performed for anodically etched porous Zn, which exhibited a PL in the blue/violet spectral range peaking at 420 nm (2.95 eV), and oxidzed porous Zn at 380$^{\circ}C$ for 10 min and 12 h. A broad absorption band was observed at 4.07 eV (305 nm), 3.49 (355 nm) for anodically etched porous Zn. In contrast, both the oxidized porous Zn and sintered ZnO exhibited an almost identical one broad absorption band at 3.85 eV (322 nm), when PLE spectra were measured at 378 nm (3.28 eV). The oxidized porous Zn and sintered ZnO, which displayed both UV and green luminescence band, showed an additional absorption band at 389 nm (3.19 eV) and 467 nm (2.66 eV). In contrast, no significant absorption band was detected for a 10-min oxidized porous Zn, which only displayed one UV luminescence void of deep-level luminescence. These absorption bands determined by PLE studies enabled a clear understanding of an emission mechanism for the UV and green luminescence from ZnO.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2523-2528
• /
• 2012

Green phosphors $(Zn_{1-a-b}M_aM^{\prime}_b)_xGa_yS_{x+3y/2}:Eu^{2+}$ (M, M' = alkali earth ions) with x = 2 and y = 2-5 were prepared, starting from ZnO, MgO, $SrCO_3$, $Ga_2O_3$, $Eu_2O_3$, and S with a flux $NH_4F$ using a conventional solidstate reaction. A phosphor with the composition of $(Zn_{0.6}Sr_{0.3}Mg_{0.1})_2Ga_2S_5:Eu^{2+}$ produced the strongest luminescence at a 460-nm excitation. The observed XRD patterns indicated that the optimized phosphor consisted of two components: zinc thiogallate and zinc sulfide. The characteristic green luminescence of the $ZnS:Eu^{2+}$ component on excitation at 460 nm was attributed to the donor-acceptor ($D_{ZnGa_2S_4}-A_{ZnS}$) recombination in the hybrid boundary. The optimized green phosphor converted 17.9% of the absorbed blue light into luminescence. For the fabrication of light-emitting diode (LED), the optimized phosphor was coated with MgO using magnesium nitrate to overcome their weakness against moisture. The MgO-coated green phosphor was fabricated with a blue GaN LED, and the chromaticity index of the phosphor-cast LED (pc-LED) was investigated as a function of the wt % of the optimized phosphor. White LEDs were fabricated by pasting the optimized green (G) and the red (R) phosphors, and the commercial yellow (Y) phosphor on the blue chips. The three-band pc-WLED resulted in improved color rendering index (CRI) and corrected color temperature (CCT), compared with those of the two-band pc-WLED.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.1-4
• /
• 2006

White-light-emitting ZnS:Mn, Cu, Cl phosphors with spherical shape and the size of $20\;{\mu}m$ are successfully synthesized. They have the double phases of cubic and hexagonal structures. They are applied to electroluminescent (EL) devices by silk screen method with the following structure: $electrode/BaTiO_3$ insulator layer ($50{\sim}60\;{\mu}m$)/ ZnS:Mn, Cu, Cl phosphor layer ($30{\sim}50\;{\mu}m$)/ITO glass. The EL devices are driven with the voltage of 100 V and the frequency of 400 Hz. The EL devices show the three emission peaks. The blue and green emission bands are originated from $CICu^{2+}$ transition and $ClCu^+$ transition, respectively. The yellow emission band results from $^4T^6A$ transition of $Mn^{2+}$ ion. As an increase of Cu concentrations, the blue and green emission intensities decrease whereas the yellow emission intensity increases; the quality becomes warm white. It is due to the energy transfer from the blue and green bands to the yellow band.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.900-909
• /
• 2018

A $ZnO/TiO_2$ photocatalyst decorated with PbS quantum dots (QDs) was synthesized to achieve high photocatalytic efficiency for the decomposition of dye in aqueous media. A $TiO_2$ porous layer, as a precursor photocatalyst, was fabricated using micro-arc oxidation, and exhibited irregular porous cells with anatase and rutile crystalline structures. Then, a ZnO-deposited $TiO_2$ catalyst was fabricated using a zinc acetate solution, and PbS QDs were uniformly deposited on the surface of the $ZnO/TiO_2$ photocatalyst using the successive ionic layer adsorption and reaction (SILAR) technique. For the PbS $QDs/ZnO/TiO_2$ photocatalyst, ZnO and PbS nanoparticles are uniformly precipitated on the $TiO_2$ surface. However, the diameters of the PbS particles were very fine, and their shape and distribution were relatively more homogeneous compared to the ZnO particles on the $TiO_2$ surface. The PbS QDs on the $TiO_2$ surface can induce changes in band gap energy due to the quantum confinement effect. The effective band gap of the PbS QDs was calculated to be 1.43 eV. To evaluate their photocatalytic properties, Aniline blue decomposition tests were performed. The presence of ZnO and PbS nanoparticles on the $TiO_2$ catalysts enhanced photoactivity by improving the absorption of visible light. The PbS $QDs/ZnO/TiO_2$ heterojunction photocatalyst showed a higher Aniline blue decomposition rate and photocatalytic activity, due to the quantum size effect of the PbS nanoparticles, and the more efficient transport of charge carriers.

• 복식문화연구
• /
• 제26권4호
• /
• pp.632-648
• /
• 2018

This study aims to contribute to the development of sports wearables. It was conducted by a convergence team of professionals in the fashion industry, kinesiology and sports studies, and computer science and engineering. The purpose of the current study was to design and develop a fabric-type fitness band for a sensor to measure acceleration during jump rope exercises. Computer science and engineering professionals developed the Arduino board and sensor, kinesiology and sports studies provided the necessary exercise protocol, and the fashion industry professionals developed the band. First, a fitness band preference survey was completed by men and women between the ages of 20 and 50. Typical uses of the band included tracking exercise amount as measured by the number of steps taken and calories burned. Strap watch closure, a single color and achromatic color, and soft and smooth touch materials were preferred as band design. Second, two fabric-type fitness bands were designed and developed. Design 1 had a 3-dimensional pocket for the sensor, bright blue color, and stretch binding around the edges and for a loop. Design 2 had a flat pocket for the sensor, achromatic color, mesh binding around the edges and two metal loops. Both designs had Velcro as a closure. Third, wear testing of both bands with the sensor were conducted of 15 women in their 20s. They wore the bands during jump rope exercises. Both bands generally satisfied the participants. The Design 2 band was slightly more satisfying than the Design 1 band.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.14-22
• /
• 2022

To improve light absorption ability in the visible light region and the efficiency of the charge transfer reaction, Pd nanoparticles decorated with reduced TiO₂ nanotube photocatalyst were synthesized. The reduced TiO₂ nanotube photocatalyst was fabricated by anodic oxidation of Ti plate, followed by an electrochemical reduction process using applied cathodic potential. For TiO₂ photocatalyst electrochemically reduced using an applied voltage of -1.3 V for 10 min, 38% of Ti⁴⁺ ions on TiO₂ surface were converted to Ti³⁺ ion. The formation of Ti³⁺ species leads to the decrease in the band gap energy, resulting in an increase in the light absorption ability in the visible range. To obtain better photocatalytic efficiency, Pd nanoparticles were decorated through photoreduction process on the surface of reduced TiO₂ nanotube photocatalyst (r10-TNT). The Pd nanoparticles decorated with reduced TiO₂ nanotube photocatalyst exhibited enhanced photocurrent response, and high efficiency and rate constant for aniline blue degradation; these were ascribed to the synergistic effect of the new electronic state of the TiO₂ band gap energy induced by formation of Ti³⁺ species on TiO₂, and by improvement of the charge transfer reaction.