• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.129-134
• /
• 2013

Sapphire wafers are used as an important substrate for the production of blue LED (light emitting diode) and the LED's performance largely depends on the quality of the sapphire single crystals. There are several crystal growth methods for sapphire crystals and Kyropoulos method is an efficient way to grow large diameter and high-quality sapphire single crystals with low dislocation density. During Kyropoulos growth, the convection of molten melt is largely influenced by the hot zone geometry such as crucible shape, heater and refractory arrangements. In this study, CFD (computational fluid dynamics) simulations were performed according to the bottom/side ratios (per unit of the crucible surface area) of heaters. And, based on the results of analysis, the molten alumina flows and remelting phenomena were analyzed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.475-483
• /
• 2015

The marine microalgae Isochrysis galbana was cultured under various light-emitting diode (LED) light conditions with different wavelengths to examine changes in growth and in amino acid and fatty acid profiles. The culture conditions for the microalgae were Conway medium, salinity of 33 psu, temperature of $24^{\circ}C$, and a 16/8 h light/dark photoperiod. Six light sources, including 5 units of 180W LED lamps (peak wavelength: blue [LB] 470 nm; green [LG] 525 nm; yellow [LY] 595 nm; red [LR] 636 nm; white [LW] 442 nm) and 1 unit of a 175W metal halide (MH) lamp, were used for the experiment. The dry cell weights ($gL^{-1}$) of I. galbana under different light conditions were in the order of LW>LB${\geq}$MH>LR>LG>LY. Levels of essential amino acids were revealed to be significantly higher under LW, LG, and MH than under the other wavelengths (P<0.05). The fatty acid, unsaturated fatty acid, and DHA contents of I. galbana were higher under MH, LW, and LG. In addition, the carotenoid content was higher under MH, LW, and LG than under the other wavelengths (P<0.05). The fucoxanthin content was highest under MH (0.28%) and lowest under LY (0.2%), and it was 0.26% under LW and LG. The results indicate that the combined use of LW and LG is effective when using LED lamps for I. galbana cultivation.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.10-19
• /
• 2020

Light is an important factor for cordycepin production in Cordyceps militaris. We investigated the effects of different light-emitting diode (LED) conditions including various LED wavelengths and their combinations on cordycepin production in Cordyceps militaris cultivated in submerged culture. The results of our study showed that the combinations of LED wavelengths were more beneficial than single LED sources for cordycepin production. Among the three tested wavelength combinations, the greatest effects for cordycepin production were observed for the red:blue light combination at the wavelength ratio of 5:5 or 3:7. The optimal culture conditions were 19.2278 h/day of illumination time; 9.19497 g/50 mL of glucose content in the media; and 53.112 h of cultivation time. Our model predicted a maximum yield of 2860.01 ㎍/mL cordycepin. Finally, to verify the calculated maximum, we performed experiments in the culture media representing the obtained optimum combination and the cordycepin yield of 2412.5 ㎍/mL.

• Medical Lasers
• /
• v.10 no.2
• /
• pp.96-105
• /
• 2021

Background and Objectives Skin aging is reportedly associated with regulation in collagen and elastin synthesis. This study investigated the potential of combining light-emitting diode (LED) treatments using a 630-nm and 850-nm LED with simultaneous microcurrent application. Materials and Methods The dorsal skin of female pigs was treated with a home-use device. We examined the treatment effects using photography, thermocamera, microscopic pathology, and histological examination to determine the mechanism of action, efficacy, and safety of the procedure. A histological observation was performed using hematoxylin and eosin, Masson's trichrome, Victoria blue, and immunohistochemical staining. We also used the Sircol soluble collagen and elastin assay kit to measure the amounts of collagen and elastin in the porcine back skin tissue after 2 and 6 weeks. Results Evaluation by visual inspection and devices showed no skin damage or heat-induced injury at the treatment site. Histological staining revealed that accurate treatment of the targeted dermis layer effectively enhanced collagen and elastin deposition. Collagen type I, a protein defined by immunohistochemical staining, was overexpressed in the early stages of weeks 2 and 6. Combined therapy findings showed the superior capability of the 630-nm and 850-nm LED procedures to induce collagen; in contrast, elastin induction was more pronounced after microcurrent treatments. Conclusion The home-use LED device, comprising a combination of 630-nm and 850-nm LEDs and microcurrent, is safe and can be used as an adjunctive treatment for self-administered facial rejuvenation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.709-718
• /
• 2021

In this paper, it can be seen that the number of abandoned dogs increases every year through the statistics on the occurrence of abandoned animals. With the goal of reducing the number of stray dogs, a smart pet dog shoulder strap is implemented based on a real-time location tracking system using the ESP32 module and GPS sensor. It is an ESP32 module with a built-in Bluetooth module. It is input to the MCU using various sensors, and finally outputs to a smart-phone application, and communicates through the built-in blue-tooth module. In addition, it uses Neopixels to compensate the weaknesses at night through LED light emission, and automatically sets the warning distance to design a music playback system through the LED flashing effect and MP3 module. In addition, a smart pet dog shoulder strap was designed to help pet dog health care by measuring the moving distance according to the amount of activity through the gyro sensor.

• Korean Journal of Environment and Ecology
• /
• v.30 no.5
• /
• pp.821-828
• /
• 2016

We examed physiological and flowering response of S. capitata, the endangered plant in Korea, under LED light conditions in plant factory to cultivate artificially for conservation. We cultivated S. capitata and measured its physiological responses and the number of flowers under red, blue, white, red+far-red mixed, red+blue mixed, and red+blue+white mixed light. The results showed that its photosynthetic rate and chlorophyll content were recorded relatively high in red+blue+white and red+blue mixed light respectively. Transpiration rate and stomatal conductance appeared relatively high in the white single light while water use efficiency was no difference. Photochemical efficiency of photochemical photosystem II by minimum and maximum chlorophyll fluorescence was the highest in the red+blue+white mixed light condition than other ones. The number of flowers of S. capitata was at its peak under the red light or red+far-red mixed light. Therefore, we conclude that the most efficient way to grow for flowering of S. capitata is to provide red light or red+far-red mixed light in the plant factory.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.134-142
• /
• 2019

This study was conducted to evaluate the growth characteristics of lettuce (Lactuca sativa L.) as affected by artificial light sources and different growing media in a closed-type plant production system (CPPS). The lettuce seeds were sown in the 128-cell plug tray filled with 5 different growing media such as urethane sponge (US), rock-wool (RW), Q-plug (QP), TP-S2 (TP) and PU-7B (PU). The germination rate of lettuce seeds was examined during 12 days after sowing. On the 13 days after sowing, the lettuce seedlings were transplanted in a CPPS with temperature $25{\pm}1^{\circ}C$ and nutrient solution (EC $2.0dS{\cdot}m^{-1}$, pH 6.5) using recirculating deep floating technique system. The light sources were set with FL (fluorescent lamps) and combined RB LEDs (red : blue = 7 : 3) with $150{\pm}10{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and a photoperiod of 14/10 hours (light/dark). The initial germination rate of lettuce was the highest in TP. The final germination and mean daily germination were the significantly highest in RW, QP and TP. The plant height, leaf length, leaf width, leaf area, and fresh and dry weights of shoot were the greatest in QP irradiated with RB LED. The number of leaves, fresh and dry weights of root and SPAD were the greatest in QP and TP irradiated with RB LED. The root length was the longest in TP irradiated with RB LED. Therefore, these results indicate that RB LED was effective for the growth of lettuce and it was also found that the QP and TP were effective for the germination and growth of lettuce in a CPPS. In addition, we confirmed the applicability of the newly developed growing medium TP for the lettuce production in a CPPS.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.43-50
• /
• 2007

We have investigated the electro-optical characteristics and reliability of LEDs with the Indium-Tin-Oxide (ITO) electrodes formed by different deposition methods: electron beam evaporation, sputtering, and hybrid method of electron beam evaporation and subsequent sputtering. The deposition method of the ITO electrode has significant influence on the electro-optical characteristics and reliability of LEDs. The LEDs with the ITO electrodes formed by sputtering and electron beam evaporation have problems caused by sputtering damage and increased electrical resistance, respectively, and the problems have been solved by the hybrid method.

• Korean Journal of Clinical Pharmacy
• /
• v.30 no.1
• /
• pp.59-64
• /
• 2020

The emergence of phosphodiesterase (PDE) 5 inhibitors gave rise to the solution for erectile dysfunction, starting with the development of sildenafil. Although their efficacy in treating erectile dysfunction has been shown, the side effects of PDE5 inhibitors, especially sildenafil, must be taken into consideration. A 64-year-old man received 100 mg of sildenafil and experienced blue vision in both eyes; however, after a day or so, his symptoms improved. The symptoms disappeared when he stopped administering sildenafil, but reappeared when the medication was re-administered. Therefore, he discontinued sildenafil treatment and was prescribed udenafil instead. After that, visual adverse events no longer occurred. Causality assessment showed that in this case, sildenafil-induced cyanopsia was "certain" under the World Health Organization-Uppsala Monitoring Center (WHO-UMC) criteria and Korean causality assessment algorithm (Ver.2), and was "probable" according to the Naranjo scale. In addition, sildenafil also led to abnormal visual reactions in other cases. Sildenafil can also inhibit PDE6, which is present in retinal cells, unlike other PDE5 inhibitors. Thus, visual adverse reactions, such as blue vision, are the unique results of sildenafil, and other PDE5 inhibitors may be used to prevent them.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.471-476
• /
• 2006

series of Ca1-xSrxS:Ce phosphors were synthesized by solid-state reactions. The Ca1-xSrxS:Ce phosphors have a strong absorption in region from 430 nm to 470 nm. The emission peaks of CaS:Ce are located at 510 nm and 570 nm. The partial replacement of Ca by Sr in Ca1-xSrxS:Ce causes a blue shift of emission wavelengths. The Ca1-xSrxS:Ce can be used as bluish green and yellow emitting phosphors for white light emitting diodes (LEDs) pumped by the blue LED. We reported the optical properties of Ca1-xSrxS:Ce phosphors for application in phosphor converted white LEDs.