• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.343-352
• /
• 2010

A zirconia gel/polymer hybrid nanofiber was produced in a nonwoven fabric mode by electrospinning a sol derived from hydrolysis of zirconium butoxide with a polyvinyl butyral. Results indicated that the hydroxyl groups on the vinyl alcohol units in the backbone of the polymer were involved in the hydrolysis as well as grafting the hydrolyzed zirconium butoxide. In addition, use of acetic acid as a catalyst resulted in further hydrolysis and condensation in the sol, which led to the growth of -Zr-O-Zr- networks among the polymer chains. These networks gradually transformed into a crystalline zirconia structure upon heating. The as-spun fiber was smooth but partially wrinkled on the surface. The average fiber diameter was $690{\pm}110\;nm$. The fiber exhibited a strong but broad blue photoluminescence with its maximum intensity at a wavelength of ~410 nm at room temperature. When the fiber was heat-treated at $400^{\circ}C$, the fiber diameter shrunk to $250{\pm}60\;nm$. Nanocrystals which belonged to a tetragonal zirconia phase and were ~5 nm in size appeared. A strong white photoluminescence was observed in this fiber. This suggests that oxygen or carbon defects associated with the formation of the nanocrystals play a role in generating the photoluminescence. Further heating to $800^{\circ}C$ resulted in a monoclinic phase beginning to form In the heat-treated fibers, coloring occurred but varied depending on the heating temperature. Crystallization, coloring, and phase transition to the monoclinic structure influenced the photoluminescence. At $600^{\circ}C$, the fiber appeared to be fully crystallized to a tetragonal zirconia phase.

• Korean Journal of Materials Research
• /
• v.20 no.5
• /
• pp.246-251
• /
• 2010

The composite photocatalysts of a Fe-modified carbon nanotube (CNT)-$TiO_2$ were synthesized by a two-step sol-gel method at high temperature. Its chemical composition and surface properties were investigated by BET surface area, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD) and ultraviolet-visible (UV-Vis) spectroscopy. The results showed that the BET surface area was improved by modification of Fe, which was related to the adsorption capacity for each composite. Interesting thin layer aggregates of nanosized $TiO_2$ were observed from TEM images, probably stabilized by the presence of CNT, and the surface and structural characterization of the samples was carried out. The XRD results showed that the Fe/CNT-$TiO_2$ composites contained a mix of anatase and rutile forms of $TiO_2$ particles when the precursor is $TiOSO_4{\cdot}xH_2O$ (TOS). An excellent photocatalytic activity of Fe/CNT-$TiO_2$ was obtained for the degradation of methylene blue (MB) under visible light irradiation. It was considered that Fe cation could be doped into the matrix of $TiO_2$, which could hinder the recombination rate of the excited electrons/holes. The photocatalytic activity of the composites was also found to depend on the presence of CNT. The synergistic effects among the Fe, CNT and $TiO_2$ components were responsible for improving the visible light photocatalytic activity.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.208-213
• /
• 2000

Using three types of porcelain clays such as White, Blue, and Yellow clays, which were used as raw materials for Bae씨a, C Chungja, and common porcelains, the biological refinement by an enrichment culture of iron reducing bacteria was studied. | In the biological clay refining, amounts of leached iron increased as increasing sucrose $\infty$ncentration, which was s supplemented as a carbon and electron donor source for cell growth and iron reduction. Total amounts of the leached iron a and specific rate of iron reduction were dependent on the types of the clay. Strength and chromaticity of refined clays which a are important properties required for porcelain clays were improved as increasing sucrose concentration. The degree of s shrinking, however, did not changed. the redness among the chromaticity of refined clays is favorably reduced through the r ripening by the iron reducing bacteria. Considering iron removal efficiency and the change of physical properties, the optimal c concentration of sucrose was 4%(w/w) in the clay.

• Korean Journal of Clinical Laboratory Science
• /
• v.44 no.4
• /
• pp.229-238
• /
• 2012

Cyclooxygenase(COX-2) is an inducible enzyme that catalyzes the synthesis of prostaglandins (PGs) from arachidonic acid. Over-expression of COX-2 has been reported to be associated with progressive hepatic fibrosis in chronic hepatic C infection and rat liver fibrosis induced by carbon tetrachloride($CCl_4$). Recently, it is well known that mast cell products can stimulate the proliferation of hepatic stellate cells and key players in liver fibrosis. But little is known regarding their role in $CCl_4$-induced liver fibrosis in rat. Our aim was to investigate the relation between COX-2 expression and mast cells during liver fibrosis after $CCl_4$ treatment. Thirty Wistar rats were divided into five groups (non-treated 0, 2, 4, 6 and 8-week after $CCl_4$-treatment). Reverse transcription polymerase chain reaction (RT-PCR) and immunohistochemistry were used to assess the expression of ${\alpha}$-smooth muscle actin (${\alpha}$-SMA), collagen-1 and COX-2 in liver tissue from $CCl_4$-treated rats. The density of collagen and mast cells were determined using a computerized image analysis system in liver sections stained with picrosirius red and toluidine blue, respectively. The expression levels of ${\alpha}$-SMA, collagen-1 and COX-2 mRNA were significantly higher at 2 wk in $CCl_4$-treated groups than non-treated group. The number of mast cells in liver tissues increased gradually from 2 wk to 6 wk depending on the fibrosis severity but decreased abruptly at 8 wk. The significant increase of collagen-1 and ${\alpha}$-SMA mRNA expression in $CCl_4$-treated rats was continued until 6 wk while the COX-2 mRNA was significantly decreased at 8 wk. These results suggest that increased mast cells are closely associated with COX-2 over-expression during hepatic fibrogenesis of $CCl_4$-treated rats.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1195-1198
• /
• 2013

Nickel hexacyanoferrate supported palladium nanoparticles (Pd-NiHCF NPs) were synthesized and studied for oxygen reduction reactions in direct methanol fuel cell. The NiHCF support was readily synthesized by a comixing of $Ni(OCOCH_3)_2$ and equimolar $K_3[Fe(CN)_6]$ solution into DI water under rigorous stirring. After the preparation of NiHCF support, Pd NPs were loaded on NiHCF via L-ascorbic acid reduction method at $80^{\circ}C$. Pd-NiHCF NPs were electrochemically active for oxygen reduction reaction in 0.1 M $HClO_4$ solution. X-ray absorption near edge structure analysis was conducted to measure the white line intensity of Pd-NiHCF to verify the OH adsorption. As a comparison, carbon supported Pd NPs exhibited same white line intensity. This study provides a general synthetic approach to easily load Pd NPs on porous coordination polymers such as NiHCF and can provide further light to load Pd based alloy NPs on NiHCF framework.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.335-342
• /
• 1991

The effect of pressure and temperature on the stabilities of the charge transfer complexes of 1,3,5-trinitrobenzene, tetrachloro-p-benzoquinone and tetracyanoethylene with hexamethylbenzene in carbon tetrachloride has been investigated by spectrophotometric measurements. The equilibrium constants for the formation of the complexes were obtained at various temperature and pressure, and thermodynamic parameters for the formation of the charge transfer complexes are calculated from these values. The relative stabilities of charge transfer complexes with hexamethylbenzene increase in the order; 1,3,5-trinitrobenzene < tetrachloro-p-benzoquinone < tetracyanoethylene. This may be regarded as an order of relative acidity of these compounds in complexation with hexamethylbenzene and is explained in terms of the negative inductive effect of the ${\pi}$ acceptors. The red-shift at higher pressure, the blue-shift at higher temperature and the relation between pressure and oscillator strength are discussed on the basis of thermodynamic functions.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1589-1595
• /
• 2010

In order to effective degradation of organic dye both under visible light or ultrasonic irradiation, the MWCNTs (multiwalled carbon nanotube) deposited with Fe and $TiO_2$ were prepared by a modified sol-gel method. The Fe/$TiO_2$-MWCNT catalyst was characterized by surface area of BET, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) and ultraviolet-visible (UV-vis) spectroscopy. The low intensity visible light and low power ultrasound was as an irradiation source and the methylene blue (MB) was choose as the model organic dye. Then degradation experiments were carried out in present of undoped $TiO_2$, Fe/$TiO_2$ and Fe/$TiO_2$-MWCNT catalysts. Through the degradation of MB solution, the results showed the feasible and potential use of Fe/$TiO_2$-MWCNT catalyst under visible light and ultrasonic irradiation due to the enhanced formation of reactive radicals as well as the possible visible light and the increase of ultrasound-induced active surface area of the catalyst. After addition of $H_2O_2$, the MB degradation rates have been accelerated, especially with Fe/$TiO_2$-MWCNT catalyst, in case of that the photo-Fenton reaction occurred. The sonophotocatalysis was always faster than the respective individual processes due to the more formation of reactive radicals as well as the increase of the active surface area of Fe/$TiO_2$-MWCNT catalyst.

• Conservation Science in Museum
• /
• v.14
• /
• pp.13-22
• /
• 2013

The Nectar Ritual Painting(Jeung7551) in National Museum of Korea is estimated to have been produced in the 16th century. Ezimagodo who is the head priest of Ruganji in Kyoto, Japan donated this painting in 2010. Overall, damages were serious, such as missing, staining, folding, insects of the face and mounting silk, therefore, it need to conservation treatment. The treatment of conservation in painting was removing surface stains and repairing missing area. It was mounted by following the original form. The analysis result of textile in mounting and support fiber used silk and hemp in microscope. Pigments in paint were divided into six color types. This painting was used that vermilion(cinnabar) and red lead for red color, litharge(massicot) and gold for yellow color, lead white for white color, malachite for green color, azurite for blue color, and carbon black(chinese ink) for black color.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.267-267
• /
• 2015

가상수의 흐름을 보다 가시적으로 파악하기 위하여 대두된 개념이 물발자국(water footprint)이다. 이는 흔히 사용되고 있는 생태발자국(ecological footprint)이나 탄소발자국(carbon footprint)에 착안하여 도입된 개념으로 한 국가의 물발자국은 직 간접적으로 물건이나 재화를 생산하는데 국민이 소비하는 물의 총량으로 정의된다. 물발자국을 내적/외적으로 단순히 구분하여 산정하는 방식이 진화하여 1단위의 생산에서 유통 및 서비스까지 확대하여 그 전 과정을 모두 포함하는 물발자국 산정방식이 도입된 것은 최근의 일이다. 직접적인 물사용과 간접적인 물사용을 구분하여 물발자국을 산정하고, 그 위에 물의 성질에 따라 green water, blue water, 그리고 grey water로 각각 개념을 상세화하여 물발자국을 산정하는 방안이 도입되었다. 2009년 물발자국 산정의 표준화를 위한 스위스의 제안이 ISO에 제출되었고, 각 국가들에 의한 투표가 진행되어 2010년 물발자국 국제표준안이 채택되었다. 본 연구는 이러한 국제기구에 의한 일련의 국제표준화 작업을 대상으로 진행되었다. 2014년 ISO/TC 207 국제총회가 개최되어 환경경영시스템(SC1), 환경감사(SC2), 환경 라벨링(SC3), 환경성과평가(SC4), 전과정평가(SC5), 온실가스관리(SC7)의 6개 분과위원회(Sub-Committees)가 구성되어 세부논의가 진행되었으며, 이러한 과정을 분석함으로서 물발자국 국제표준(ISO 14046)과 향후 우리나라의 대응방안을 고찰하였다. 물발자국 국제표준(ISO 14046) 제정을 통해 물발자국의 필요성 및 중요성에 대한 국가 간 합의는 도출되었으나, 적용시기 및 세부적인 방법론 등에 대한 이견이 여전히 존재하고 있다. ISO 14046의 실질적 적용에 필요한 세부사항과 관련된 기술보고서 작업초안(WD 14073)은 작업반(SC5/WG8)에서 진행되고 있다. 그러나 물발자국 국제표준이 국가 간 무역장벽이나 특정국의 진입을 막는 수단으로 사용될 수 있는 점 등 실질적으로 국제표준의 도입에 따른 문제점 역시 존재한다. 본 연구에서 제시된 국제표준의 도입 방안을 통하여 가상수무역의 국제적 선점효과를 기대함과 동시에 수자원의 유효한 활용을 기대할 수 있을 것이다.

• Advances in materials Research
• /
• v.11 no.3
• /
• pp.225-235
• /
• 2022

It includes the synthesis of pristine ZnO nanoparticles and a series of Ag-doped zinc oxide nanoparticles was carried out by reflux method by varying the amount of silver (1, 3, 5, 7 and 9% by mol.). The morphology of these nanoparticles was investigated by SEM, XRD and FT-IR techniques. These techniques show that synthesized particles are homogenous spherical nanoparticles having an average particle size of about 50-100 nm along with some agglomeration. The photocatalytic activity of the ZnO nanoparticles and Ag doped ZnO nanoparticles were investigated via photodegradation of methylene blue (MB) as a standard dye. The data from the photocatalytic activity of these nanoparticles show that 7% Ag-doped ZnO nanoparticles exhibit much enhanced photocatalytic activity as compared to pristine ZnO nanoparticles and other percentages of Ag-doped ZnO nanoparticles. Furthermore, 7% Ag-doped ZnO was made composites with sulfur-doped graphitic carbon nitride by physical mixing method and a series of nanocomposites were made (3.5, 7.5, 25, 50, 75% by weight). It was observed that the 25% composites exhibited better photocatalytic performance than pristine S-g-C 3 N 4 and pure 7% Ag-doped ZnO. Tauc's plot also supports the photodegradation results.