• Journal of Environmental Health Sciences
• /
• v.30 no.2
• /
• pp.167-172
• /
• 2004

In this study, we carried out the research for the recycling potential of the dyeing wastewater treatment sludges as construction materials. The incineration ash of sludges were solidified as interlocking block in condition of sludge/cement ratio 2.5%, 5.0% and 10%, respectively. Those interlocking blocks were cured for 3days, 7days and 28days in ambient air condition, respectively. The results of this research were summarized as follows: The dyeing wastewater treatment sludges was below the Korea Leaching Limit. After incineration, the ash was manufactured as interlocking block. Bendable strength over 50kg$_{f}$/$\textrm{cm}^2$ suitable for interlocking block was obtained only when the sample was cured for 7days at sludge/cement ratio 2.5% and 5.0%. Hygroscopic ratio of interlocking block was above the Korea Industry Standard. We think that recycling of the incineration ash from dyeing wastewater treatment sludges to interlocking block will have high potential possibility.y.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.257-263
• /
• 2004

This paper is related to the object-based stereo matching algorithm which makes it possible to estimate inner-region disparities for each segmented region. First, several sample points are selected for effectively representing the segmented region, Next, stereo matching is applied to the small area within segmented region which existed in the neighborhood or each sample point. Finally, inner-region disparities are interpolated using a plane equation with disparity of each selected sample. According to the proposed method, the problem of feature-based method that the depth estimation is possible only in the feature points can be solved through the propagation of the disparity in the sample point into the inside of the region. Also, as selecting sample points in contour of segmented region we can effectively suppress obscurity which is occurred in the depth estimation of the monotone region in area-based methods.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.256-261
• /
• 2013

The efficiency of the two extractions (refluxing extraction and heating-block extraction) was compared to develop the simple analytical method for the determination of capsaicinoids, including capsaicin and dihydrocapsaicin in red pepper powder. For the method development, the parameters, including particle size, extraction time and sample size, were evaluated using ultra high performance liquid chromatography (u-HPLC). It was found that the most effective extraction time of the refluxing extraction was 3 hr. The higher extraction efficiency was obtained with the fine particle of a mild red pepper powder, while the particle size did not affect the extraction efficiency in case of the hot red pepper powder. The higher extraction efficiency was obtained with the small size of sample taken because of the ratio of the large extracting solvent to sample amount. The extraction efficiency of the refluxing method was 3-9% higher than that of the heating-block method, however, the heating-block method could be applied to the determination of capsaicinoids in the red pepper powder for the purpose of quality control of the product.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.849-861
• /
• 1995

In this paper, a new trace driven simulation algorithm is proposed to evaluate the bus traffic and the miss ration of the various sector cache memories, which have various sub-block sizes and block sizes and associativities and number of sets, with a single pass through an address trace. Trace-driven simulaton is usually used as a method for performance evaluation of sector cache memories, but it spends a lot of simulation time for simulating the diverse cache configurations with a long address trace. The proposed algorithm shortens the simulation time by evaluating the performance of the various sector cache configurations. which have various sub-block sizes and block sizes and associativities and number of sets , with a single pass through an address trace. Our simulation results show that the run times of the proposed simulation algorithm can be considerably reduced than those of existing simulation algorithms, when the proposed algorithm is miplemented in C language and the address traces obtained from the various sample programs are used as a input of trace-driven simulation.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.5-10
• /
• 2010

This paper introduces a new fast motion estimation based on estimating a block matching error (i.e., sum of absolute difference (SAD)) between blocks which can eliminate an impossible candidate block much earlier than a conventional partial distortion elimination (PDE) scheme. The basic idea of the proposed scheme is based on predicting the total SAD of a candidate block using its partial SAD. In particular, in order to improve prediction accuracy and computational efficiency, a sub-sample based block matching and a selective pixel-based approaches are employed. In order to evaluate the proposed scheme, several baseline approaches are described and compared. The experimental results show that the proposed algorithm can reduce the computations by about 44% for motion estimation at the cost of 0.0005 dB quality degradation versus the general PDE algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.114-120
• /
• 2008

XLPE cable is using insulator for Cross Linked Polyethylene(XLPE), because insulation Performance is superior and easy comparatively. Need systematization of accident transaction for electrical equipment accident, It is no disposal standard for defect of manufacture and second to accidents. in this paper deals with the change of XLPE cable insulation. To understand the electrical properties of XLPE insulation. Made of XLPE block sample, Penetration fracture Sample and flashover sample. Ogura needles having tip radius of $10[{\mu}m]$ were inserted into each sample. AC voltage of 1[kV/sec] increased at 60[Hz] were apple to breakdown sample and flashover sample. AC voltages of 12[kV], 17[kV] at 60[Hz] were a lied to XLPE block sample. The electrical properties of specimens were measured were measured from initiation of tree and breakdown to their characteristics were analyzed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.59-69
• /
• 2008

The purpose of this paper is to measure the level of difficulty of fingerprint database based on sample quality. This paper proposes distribution of a sample quality analyzer and a difference of sample quality analyzer to measure the level of difficulty. Experimental results demonstrate that there are stronger correlation between matching performance and level of difficulty based on difference of sample quality than other measure. Especially, level of difficulty based on OQ Block of MPQ co-occurrence matrix shows highest correlation with matching performance, and moreover it can predict the matching performance of unknown databases.

• Journal of Fashion Business
• /
• v.9 no.3
• /
• pp.64-87
• /
• 2005

The purpose at this study is to develop the appropriate bodice model for Chinese women in order to contribute to the improvement of fitness at clothing products that are exported to China. The sample group was the subject of 149 persons with the standard body shape at 19-24 years old women who reside in Beijing and Shanghai, China. The data analysis is processed for statistics using SPSSWIN 10.0 PROGRAM, and the used analysis methods are technical statistics analysis, factor analysis, group analysis, and one-way ANOVA. The outcome of this study is summarized as follows. 1. Prior to develop the tight-fitting shape of bodice model, the body classification approach by the posture and type of bending and stretching is selected to use 6 index items, and the body types are classified into bent body, right body, and pull-back body. 2. The average body size of standard body shape had 3 times of wearing experiment based on the tight-fitting shape of ESMOD bodice block drawing, and the system was corrected and supplemented to present the final bodice block drawing. 3. Comparisons have been made based on the center front line, center back line and chest circumference for each of existing bodice block for Chinese women, existing bodice block for Korean women and the combination of the bodice block under this study.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.3
• /
• pp.165-171
• /
• 2007

Dependent models in quality statistics are classified as serially autocorrelated model, multivariate model and dependent sample model. Dependent sample model is most efficient in time and cost to obtain samples among the above models. This paper proposes to implement parametric and nonparametric models into production system depended on demand pattern. Nonparametric models have distribution free and asymptotic distribution free techniques. Quality statistical models are classified into two categories ; the number of dependent sample and the type of data. The type of data consists of nominal, ordinal, interval and ratio data. The number of dependent sample divides into 2 samples and more than 3 samples.

• Communications for Statistical Applications and Methods
• /
• v.26 no.6
• /
• pp.611-622
• /
• 2019

This paper considers the estimation of the long memory parameter in nonparametric regression with strongly correlated errors. The key idea is to minimize a unified mean squared error of long memory parameter to select both kernel bandwidth and the number of frequencies used in exact local Whittle estimation. A unified mean squared error framework is more natural because it provides both goodness of fit and measure of strong dependence. The block bootstrap is applied to evaluate the mean squared error. Finite sample performance using Monte Carlo simulations shows the closest performance to the oracle. The proposed method outperforms existing methods especially when dependency and sample size increase. The proposed method is also illustreated to the volatility of exchange rate between Korean Won for US dollar.