• 한국실내디자인학회논문집
• /
• 제13권5호
• /
• pp.125-132
• /
• 2004

The purpose of this study is focused on defining the types of spatial configuration of internal functions in city hotels by researching and analyzing city hotels in Korea and Japan. The scope of this study is limited to the period of early 1980's to the end of 1990's and 18 city hotels in Korea and Japan are selected as subject. Researching existing records and analyzing plans, surveys are used as the method of the study. The result of this study is as follow. First, block composition of floor plans that is used for hotel construction could be divided into three types (immanent type-6hotels, combined type-7hotels, adjacent type-4hotels). Second, the result of analysis about the internal functions and structural types of public area in city hotels is as follow. More Korean city hotels are taking concourse type (Korea 77.8%, Japan 55.6%) and hall type (Korea 22.2%, Japan 11.1%) than Japanese city hotels. However, the mixed type (concourse type +hall type) is only used in Japan (Korea 0%, Japan 33.3%). Third, as the result of the comparison of the size of public area between Korea and Japan, Korean hotels (36.70%) have larger space than Japanese hotels only in the service area. public (Korea 33.98% < Japan 34.71%), business (Korea 27.68% Japan 31.41%)and empty (Korea 1.64% < Japan 6.13%) area is taking larger space in Japanese city hotels than Korean.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권7호
• /
• pp.990-996
• /
• 2005

The effect of diets varying in level and source of nitrogen (N) and fermentable organic matter on dynamic characteristics of microbial populations in rumen liquor and their impact on substrate fermentation in vitro was studied. The diets tested were straw alone, straw+concentrate mixture and straw+urea molasses mineral block (UMMB) lick. The same diets were taken as substrates and tested on each inoculum collected from the diets. Diet had no effect on the amino acid (AA) composition of either bacteria or protozoa. Differences among the diets in intake, source of N and OM affected bacterial and protozoal characteristics in the rumen. Upper asymptote of gas production (Y$\alpha$) had a higher correlation with bacterial pool size and production rate than with protozoal pool size and production rate. Among the parameters of the gas production model, Y$\alpha$ and lag time in total gas has showed significant (p<0.01) correlation with bacterial characteristics. Though the rate constant of gas production significantly differed (p<0.01) between diet and type of straw, it was least influenced by the microbial characteristics. The regression coefficient of diet and type of straw for Y$\alpha$ indicated that the effect of diet on Y$\alpha$ was threefold higher than that of the straw. As microbial characteristics showed higher correlation with Y$\alpha$, and diet had more influence on the microbial characteristics, gas production on a straw diet could be used effectively to understand the microbial characteristics.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.128-136
• /
• 2013

This study presents the development of Gateway Control Module using SAE J1939 protocol for the commercial vehicles. Presently, the load rate of CAN bus is increased by the single network composition and addition of new ECUs for development of intelligent vehicles. Because the embedded system of the integrated network control function has the errors of the CAN bus caused by the increase of ECU, it is needed for development of commercial vehicles. Also, this study presents the development of smart functions that can diagnosis CAN bus errors, fault diagnosis of ECU and basic function that arbitrates CAN bus between ECUs of commercial vehicle. GCM was designed for 4channel separation about Gateway function as solution of load rate decrease and smart functions. HILS(Hardware in the loop simulation)system that can achieve simulation about CAN Messages of all systems on vehicle was applied to evaluate performance and verification of all functions and performance. The load rate on CAN bus was decreased at using functions what was delivery, block and process of GCM. Through this, it was enabled to organize systematic architecture for gateway.

• 한국초지조사료학회지
• /
• 제33권3호
• /
• pp.185-192
• /
• 2013

This study was carried out to investigate the influence of the seeding dates on the yield and feed value in cultivating Italian rye grass on paddy soil. The field experiment was designed in a randomized block design of 3 repetitions with seeding dates of Oct. 19 (T1), Oct. 26 (T2), Nov. 2 (T3), Nov. 9 (T4), and Nov. 16 (T5) treatments. Plant length, fresh yield, dry matter yield and TDN yield were increased with early seeding dates (p<0.05). Crude protein, Crude fat and crude ash were increased with early seeding dates (p<0.05). On the other hand, NDF, ADF and Crude fiber were decreased with early seeding dates (p<0.05). Total mineral contents were higher in the order of T4 > T3 > T5 > T1 > T2 (p<0.05). The total composition amino acid content was decreased significantly (p<0.05) as the seeding dates delayed. Total free sugar content was highest in T1, whereas the lowest in T5 treatment (p<0.05). Nutrition yields (crude protein, crude fat, amino acid and free sugar) were increased significantly with early seeding dates (p<0.05). The above result indicated that it is favorable to seed soon after rice harvest to increase dry matter yield and nutrition yield of Italian ryegrass in the midlands.

• 한국초지조사료학회지
• /
• 제17권4호
• /
• pp.351-356
• /
• 1997

With a purpose of finding out the influences of herbicide treatment on the forage value and ecological characteristics of grassland vegetations in the Rumex acetosella dominated pasture, this trial was arranged as a randomized block design with three treatments[1) Seeding(cntrol), 2)dicamba 4${\ell}$/ha+seeding+dicamba 4 ${\ell}$/ha and 3) dicamba 4${\ell}$/ha+lime+seeding+dicamba 4 ${\ell}$/ha], and conducted in Youngam, Jeonnam Province ftom June, 1995 to October, 1996. In the Rumex acetosella dominated pasture, the treatment of dicamba 4${\ell}$/ha+ lime+seeding+dicamba 4${\ell}$/ha was improved to the most desirable grassland vegetation with pasture plants of 87%. In the renovated grassland, the life forms of Hemicryptophytes increased greatly by 57.0%, on the other hand Geophytes was much more decreased by 56.8% than those of low productive grassland. The similarity coefficients between grassland vegetation groups were greatly affected by botanical composition. The forage value of standing crop in the renovated grassland with 6.56 was much more increased than low productive grassland with 2.76. The treatment of dicamba 4${\ell}$/ha+lime+ seedingdicamba 4${\ell}$/ha increased 2 1% of dry mattaer yield, and were high 18- 19% of energy (NEL and TDN) productivity than those of the control(seeding), respectively.

• 천문학회보
• /
• 제36권2호
• /
• pp.147.1-147.1
• /
• 2011

We investigate the chemical differentiation in F, G, K type stars with and without planets to extend the work by Kang et al. (2011) to various spectral types. Since the primordial chemical composition has been preserved in the stellar atmosphere, stellar metallicity can provide the information on the primordial material, which is the potential building block of planets. Therefore, we can explore the favored conditions for planet formation through the comparison of chemical compositions between planet-host stars (PHSs) and stars without planets. In this work, we analyze 19 F, G, and K type stars. In each spectrum, we measure equivalent widths (EWs) of Fe, Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Co, and Ni using TAME (Tools for Automatic Measurement of Equivalent width). The abundances of these species can be derived with the measured EWs and MOOG code (Sneden 1973). Like results by precedent studies, we find that planet-host stars have abundances higher than stars without planets. The typical difference in the abundances of Na, Mn, Co and Ni is $0.4{\pm}0.2dex$. In addition, as found in Kang et al. (2011), Mn is the most different element between PHSs and comparison stars.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.858-864
• /
• 2019

The increasing demands of lifting lugs can be attributed to the rapid advancement of shipbuilding and offshore-structure production technologies and an exponential increase in the size of the block units of ship structures. Therefore, to ensure safety during the transportation and turnover of large blocks, it is important to determine the structural integrity and position of lifting lugs. However, because the manufacturing cost and availability of lugs are important considerations, low cost and easily obtainable steel compositions of grades different from those of the blocks are often used as alternatives. The purpose of this study is to investigate the effect of a lifting-lug metal on the physical properties of a base metal in a dissimilar welding between the base metal and lifting lug. The effect was evaluated by observing the metal microstructures and determining the hardness and dilution values on the cross-sectional surface of the lifting lug. According to the results of the metal microstructures, impact, hardness, and emission spectrochemical analysis at the surface from where the lug was removed confirmed that the chemical composition of the lifting-lug metal did not influence the physical properties of the base metal.

• KIEAE Journal
• /
• 제9권6호
• /
• pp.13-18
• /
• 2009

Korean traditional houses have been developed in harmony with natural environment and comfortable indoor condition by using the natural resources including building layout, space composition and materials. Originally Korea traditional architectures have used wood lintel constructions and loess walls through the many years. Theses loess have many strength such as highly heat capacity, controling of humidity, a deodorant than any other materials. Nowaday it is recommended to use exterior and interior walls in loess wall to meet the eco-friendly materials to improve our residental environmental. Thus this study aims to research the sound insulation performance of traditional loess brick wall varied with thickness, thermal insulation materials and cavity wall. The sound insulation performance of these loess walls are compared with other masonry wall's and sound insulation performance of th walls were tested in anechoic laboratory to measure the sound transmission loss of these walls. The loess brick wall with 75mm thickness of cavity is shown the sound insulation performance with Rw 57 which is nearly same performances of 1B brick wall and cement 8' block wall, The improving effect of insulation materials is shown in the high frequency bandwidth. Especially, there is improving as much as 11 dB using the extruded poly stylene form(75mm) and poly ethylene film(0.7mm).

• ETRI Journal
• /
• 제38권5호
• /
• pp.847-857
• /
• 2016

Broadcasting services such as multi/single channel HDTV and 3DTV/2DTV use a multi-channel encoder that changes the bitrate and composition of the video service depending on the time. However, this type of multi-channel encoder could cause a longer latency owing to the variable bitrate and relatively bigger size of the buffers, which results in the same delay as in 3DTV even for a conventional DTV service. On the other hand, systems built based on separate encoders, each of which is optimized for the target service, might not have such latency problems. Nevertheless, there might be a distortion problem in the image and sound at the time of a switchover between two encoders with different output bitrates and group of picture structures. This paper proposes a system that can realize a seamless video service conversion using two different video encoders optimized for each video service. An overall functional description of the video service change control server, which is a main control block for the proposed system, is also provided. The experiment results confirm the seamless switchover and reduced broadcasting latency of DTV services compared with a broadcasting system composed of a multi-channel encoder system.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권1호
• /
• pp.15-22
• /
• 2015

Poly(ethylene glycol) end-capped with pentafluorophenyl group(s) in ABA (FP-PEG-FP) and AB (mPEG-FP) types were prepared. Even though they were similar in composition, the lower critical solution temperature (LCST) of FP-PEG-FP was observed at $23^{\circ}C$, whereas that of mPEG-FP was observed at $65^{\circ}C$. To understand the large difference in solution behaviour of the two polymers, UV-VIS spectroscopy, microcalorimetry, 1H-NMR spectroscopy, and dynamic light scattering were used. FP-PEG-FP has two hydrophobic pentafluorophenyl groups at the ends of hydrophilic PEG (1000 Daltons), whereas mPEG-PF has a highly dynamic PEG (550 Daltons) block that are anchored to a hydrophobic pentafluorophenyl group. PF-PEG-PF not only has a smaller conformational degree of freedom than mPEG-PF but also can form extensive intermolecular aggregates, therefore, PF-PEG-PF exhibits a significantly lower LCST than mPEG-PF. This paper suggests that topological control is very important in designing a temperature-sensitive polymer.