• Korean Journal of Environment and Ecology
• /
• v.27 no.1
• /
• pp.99-112
• /
• 2013

This study aims to show the changes of characteristics of vegetation structure for 20 years(1991~2010) in Naejangsan National Park. As a result of analysis of actual vegetation, the mixed community of Quercus variabilis and Quercus serrata was distributed with 56.1%, and Q. variabilis community showed in southern steep slope with 17.6%. Pinus densiflora community(5.8%) was observed on the ridge and Carpinu tschonoskii community distributed in the slope of the valley with 6.6%. Zelkova serrata and Prunus sargentii community were distributed in valley. The classification by TWINSPAN, ordination by DCA considering importance percentage and property of vegetation class were divided into 4 communities, which are community I(P. densiflora-Q. variabilis community), community II(Q. variabilis community), community III(C. tschonoskii community) and community IV(Mixed deciduous broad-leaved trees community). The age of Pinus densiflora was 32years old and Q. serrata was 36 years old in the community I, that of Q. variabilis was 64 years old in the community II, Q. serrata was 46 years old and C. tschonoskii was 45 years old in the community III, and Acer palmatum was 54 years old and Cornus controversa was 47 years old in the community IV. As the result of Shannon's index of species diversity, the community Iwas ranged from 0.9751 to 1.4199, community II was ranged from 1.0765 to 1.3278, community III was ranged from 1.0353 to 1.2881, and community IV was ranged from 1.1412 to 1.3807. The change of vegetation structure analyzed through the comparison with results of studies carried out 20 years ago were natural selection of P. densiflora, expansion of Quercus spp. and increase of C. tschonoskii. Especially, A. palmatum is dominated by Q. variabilis in canopy layer like the result of study 20 years ago. A. palmatum was analysed by 14.6% in the canopy layer of only mixed deciduous broad-leaved trees community. As a result of analysis of habitat property of Q. variabilis and A. palmatum, Q. variabilis was distributed in dry area with the low value of pH, O.M., exchangeable cations and Avail. P, and A. palmatum was located in the wet valley with huge value of nourishment. The tendency of reduction of bio-diversity by Sasa borealis is same as previous study but, the distributed areas were reduced in Naejangsan area.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.288-292
• /
• 2008

This study was conducted to identify the effects of irrigation amount to produce high quality melon fruit in fertigation culture. Irrigation amount of during fruit harvesting period was doubled at the low irrigation point ($(-45{\sim}50\;kPa$) treatment as 115 mm as than that of the high irrigation point ($-20{\sim}25\;kPa$) treatment. The plant growth rates such as stem length, leaf weight and plant height were a little diminished at the low irrigation point ($-45{\sim}50\;kPa$) than those of the other treatments. Internode length was however not affected by irrigation amount. Fruit weight was lighter at the low irrigation point ($-45{\sim}50\;kPa$) than that of at the high irrigation point and fruit height was shorter, but fruit diameter was not affected by irrigation amount. Fruit soluble solid was $0.9^{\circ}Bx$ higher at the low irrigation point ($-45{\sim}50\;kPa$) than at the high irrigation point ($-20{\sim}25\;kPa$) and net index was higher. Total marketable yield was highest by 3,937 kg/10a at the high irrigation point ($-20{\sim}25\;kPa$), but the excellent marketable yield was highest by 2,531 kg/10a at the low irrigation point ($-45{\sim}50\;kPa$). Inorganic contents of the soil N, K, Ca and Mg were not affected by irrigation amount. It was therefore thought that optimum irrigation point to produce high quality melon fruit by fertigation culture was $-45{\sim}50\;kPa$ at ripening stage.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.438-446
• /
• 2019

The interest in mini watermelon (Citrullus lanatus) with small fruits weighing 2-3 kg has increased by the increasing trend in one-person households and consequent tendency to consume small meals. Watermelon grafting onto cucurbit rootstocks is a very effective way to control soil-borne diseases, such as Fusarium wilt; however, this practice negatively impacts the fruit quality. This study was conducted to investigate the growth, fruit set, and fruit quality of mini watermelon grafted onto wild watermelon accessions (Citrullus spp.) resistant to Fusarium wilt. Five watermelon accessions (Galactica, IT 208441, PI 482322, PI 500303, and PI 593358) were evaluated as rootstocks for the mini watermelon "Ministar". Non-grafted "Ministar" and "Ministar" grafted onto "Shintozwa" (Cucurbita maxima D. C. moschata D.) or "Bullojangsaeng" (Lagenaria leucantha) were used as controls. The roots of the transplants grafted onto "PI 593358" and "Shintozwa" weighed more than those on other rootstocks. Additionally, the transplants on "PI 593358" showed better growth and fruit set in the field than the other transplants. However, the total soluble solid contents and fruit quality indices of the transplants on "PI 593358" and "Shintozwa" were lower, whereas the total fruit quality index of those on "PI 482322" was higher. Thus, the wild watermelon accessions tested can potentially be used as basic germplasm for developing watermelon rootstocks instead of cucurbit rootstocks. The most promising accession for this purpose was found to be "PI 482322".

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.419-428
• /
• 2021

In order to develope a mobile-based greenhouse energy calculation program, firstly, the overall thermal transmittance of 10 types of major covers and 16 types of insulation materials were measured. In addition, to estimate the overall thermal transmittance when the cover and insulation materials were installed in double or triple layers, 24 combinations of double installations and 59 combinations of triple installations were measured using the hotbox. Also, the overall thermal transmittance value for a single material and the thermal resistance value were used to calculate the overall thermal transmittance value at the time of multi-layer installation of covering and insulating materials, and the linear regression equation was derived to correct the error with the measured values. As a result of developing the model for estimating thermal transmittance when installing multiple layers of coverings and insulating materials based on the value of overall thermal transmittance of a single-material, the model evaluation index was 0.90 (good when it is 0.5 or more), indicating that the estimated value was very close to the actual value. In addition, as a result of the on-site test, it was evaluated that the estimated heat saving rate was smaller than the actual value with a relative error of 2%. Based on these results, a mobile-based greenhouse energy calculation program was developed that was implemented as an HTML5 standard web-based mobile web application and was designed to work with various mobile device and PC browsers with N-Screen support. It had functions to provides the overall thermal transmittance(heating load coefficient) for each combination of greenhouse coverings and thermal insulation materials and to evaluate the energy consumption during a specific period of the target greenhouse. It was estimated that an energy-saving greenhouse design would be possible with the optimal selection of coverings and insulation materials according to the region and shape of the greenhouse.

• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.66-77
• /
• 2019

The present study investigated pine trees, which forms a major plantation species in Korea, with the objective of improving the survival rate of pine trees after planting. Growth responses and characteristics were assessed by controlling the level of fertilizer application, which is a basic controlling the growth of pine seedlings, to identify the optimal fertilization treatment. Pine tree seedlings were grown in 104 containers and were examined 8 weeks after planting. Stem height and were measured at 4-week intervals. In terms of fertilization treatment for 1-0 pine seedlings, the treatment group with gradually-increasing fertilizer concentration ($500{\rightarrow}1000{\rightarrow}1000{\rightarrow}1000mg{\cdot}L^{-1}$) had the biggest increase in stem height and diameter at the root. The survey results indicated that the increased concentration treatment group and the gradually-increasing concentration treatment group had more growth compared with that in the fixed concentration treatment group. The gradually-increasing concentration treatment group ($500{\rightarrow}1000{\rightarrow}1000{\rightarrow}1000mg{\cdot}L^{-1}$) had the highest total dry matter production. Nine weeks after fertilization, the tips of the pine leaves turned yellow in the fixed concentration treatment group ($3000mg{\cdot}L^{-1}$). The same phenomenon was observed in the treatment group in which the concentration was increased to $2000mg{\cdot}L^{-1}$, and in the gradually-increasing concentration treatment group, when the concentration was raised up to $2000mg{\cdot}L^{-1}$. We concluded that the optimal fertilization conditions for producing healthy pine 1-0 seedlings involve fertilizing once a week with Multifeed 19 at $500mg{\cdot}L^{-1}$ during the seedling period, Multifeed 19 at $1000mg{\cdot}L^{-1}$ during the rapid growth period, and Multifeed 32 at $1000mg{\cdot}L^{-1}$ during the maturation period.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.384-392
• /
• 2022

The objective of this study was to estimated nitrogen content and chlorophyll using RGB, Hyperspectral sensors to diagnose of nitrogen nutrition in apple tree leaves. Spectral data were acquired through image processing after shooting with high resolution RGB and hyperspectral sensor for two-year-old 'Hongro/M.9' apple. Growth data measured chlorophyll and leaf nitrogen content (LNC) immediately after shooting. The growth model was developed by using regression analysis (simple, multi, partial least squared) with growth data (chlorophyll, LNC) and spectral data (SPAD meter, color vegetation index, wavelength). As a result, chlorophyll and LNC showed a statistically significant difference according to nitrogen fertilizer level regardless of date. Leaf color became pale as the nutrients in the leaf were transferred to the fruit as over time. RGB sensor showed a statistically significant difference at the red wavelength regardless of the date. Also hyperspectral sensor showed a spectral difference depend on nitrogen fertilizer level for non-visible wavelength than visible wavelength at June 10th and July 14th. The estimation model performance of chlorophyll, LNC showed Partial least squared regression using hyperspectral data better than Simple and multiple linear regression using RGB data (Chlorophyll R²: 81%, LNC: 81%). The reason is that hyperspectral sensor has a narrow Full Half at Width Maximum (FWHM) and broad wavelength range (400-1,000 nm), so it is thought that the spectral analysis of crop was possible due to stress cause by nitrogen deficiency. In future study, it is thought that it will contribute to development of high quality and stable fruit production technology by diagnosis model of physiology and pest for all growth stage of tree using hyperspectral imagery.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.194-203
• /
• 2022

Cultivation of tomatoes in Korea grown in soil covers 89% of the total area for tomato cultivation. Tomatoes grown in soil often encounter various environment stresses including not only salt stress and soil-borne diseases but also cold stress in the winter season. This study was conducted to comparatively analyze the performance of rootstocks with cold stress by measuring the growth, yield, and photosynthetic efficiency in tomatoes grown in soil. The rootstocks were used 'Powerguard', 'IT173773', and '20LM' for the domestic rootstock cultivars and 'B-blocking' for a control cultivar. The tomato cultivar 'Red250' was used as the scion and the non-grafted tomatoes. Stem diameter, flowering position, leaf length, and leaf width were investigated for the growth parameters. The stem diameter of the non-grafted tomatoes decreased by 15% compared to the grafted tomatoes at 80 days after transplanting when exposed to low temperatures of 9-14℃ for 14 days. The leaf length and width of the non-grafted tomatoes were the lowest with 42.4 cm and 41.8 cm at 80 days after transplanting. The total yield per plant was the highest in tomato plants grafted on 'Powerguard' with 1,615 g and lowest in non-grafted tomatoes with 1,299 g. As the result of measuring the chlorophyll fluorescence parameters, PI_ABS and DI₀/RC, which mean the performance index and dissipated energy flux, 'Powerguard' was the highest with 3.73 in PI_ABS and the lowest with 0.34 in DI₀/RC, whereas non-grafted tomatoes was the lowest with 2.62 in PI_ABS and the highest with 0.41 in DI₀/RC at 80 days after transplanting. The stem diameter has positive correlation with PI_ABS, while it has negative correlation with DI₀/RC. The results indicate that can be analyzed by chlorophyll fluorescence parameters can be used for analyzing the differences in the growth of tomato plants grafted on different rootstocks when exposed to cold stress.

• Journal of Bio-Environment Control
• /
• v.33 no.2
• /
• pp.88-98
• /
• 2024

This study provides basic data on the growth and production of seedlings produced in plant factories with artificial lighting by comparing seedling quality, growth and fruit characteristics, and production after transplanting cucumber seedlings according to environmental differences between plant factories with artificial lighting and conventional nurseries in greenhouse. The control group consisted of greenhouse seedlings (GH) grown in the conventional nursery before transplanting. Plant factory to greenhouse seedlings (PG) were grown for 9 days in a plant factory with artificial lighting and for 13 days in an conventional nursery. Plant factory seedlings (PF) were grown in a plant factory with artificial lighting for 22 days until planting. In terms of seedling quality, PFs had the highest relative growth rate and compactness and the best root zone development. After transplanting PFs tended to grow faster, the first harvest date was 2 days earlier than that of GHs, and the growing season ended 1 day earlier. The female flower flowering rate of the PFs was high, and the fruit set rate was of PF the lowest. The production per unit area was highest for PFs at 10.23kg Performance index on the absorption basis, the most sensitive chlorophyll fluorescence parameter, was highest at 4.14 for PFs at 4 weeks after transplantation. By comparing the maximum quantum yield of primary PS II photochemistry and dissipated energy flux per PS II reaction center electron at 4 weeks after transplantation, PFs tended to be the least stressed. PFs had the best seedling quality, growth, and production after planting, and fruit quality was consistent with that of greenhouse seedlings. Therefore, plant factory seedlings can be used in the field.

• Journal of Life Science
• /
• v.19 no.4
• /
• pp.486-491
• /
• 2009

This study was conducted to investigate microbial distribution in the processing steps and to estimate quality index and shelf life of packaged Tofu (soybean curd). Sanitation and safety of Tofu were analysed in aspects of total viable counts (TVCs) and coliforms. Organoleptic deterioration was observed from some packaged Tofu when their TVCs were over $10^6\;CFU/g$. The controlled simply packaged Tofu and sterilized Tofu with TVCs of under $10^5\;CFU/g$ were 32.0% and 86.9% of the total samples, respectively. Also, the controlled simply packaged Tofu and sterilized Tofu with negative coliforms were 12.0% and 83.7% of the total samples, respectively. TVCs and coliforms increased in some processing steps, which include washing and soaking of raw soybeans, and formation and 1st cooling of packaged Tofu. Increases of TVCs and coliforms in the washing and soaking step were due to contamination from the soaking tank and airborne bacteria, whereas increases of TVCs and coliforms in the grinding step were due to contaminations from the grinder, line and reserving tank. TVCs and coliforms increased in the formation and 1st cooling step of packaged Tofu due to contaminations from filter wools, trays, employee's hands, cooling water, formed products and filter wools.

• Korean Journal of Environment and Ecology
• /
• v.28 no.1
• /
• pp.24-32
• /
• 2014

Our study is purposed to understand effect on spatio-temporal variability of macroinvertebrate community 11 sampling times at 4 sites between two streams (Shinchon stream and Gongji stream in Chuncheun City) from May 2011 to October 2013. In this study, the possible physical factors on spatio-temporal variability of macroinvertebrate community were discussed. After stream improvement project, the effects of anthropogenic disturbance in study sites appeared as increased water temperature more than $30^{\circ}C$ and the difference of water temperature between Shinchon stream and Gongji stream was by maximum $9^{\circ}C$ on 2012. The monsoon rainfall decreased number of species, individuals and biodiversity index of macroinvertebrate community, particularly, in Shincheon stream compare to Gongji stream. Dominant species of macroinvertebrate taxa was caddisfly in Shincheon stream and Diptera in Gongji stream but on August 2013, it was dominated by Diptera, Chironomidae spp. in all study sites. The spatio-temporal variability of macroinvertebrate community in the streams may be useful as bio-indicator influencing anthropogenic factors such as soil erosion (landslide or cultivation) or monsoon rainfall.