• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.41-48
• /
• 2006

An anti-collision algorithm is very important in the RFID system because it decides tag identification time and tag identification accuracy. We propose improved anti-collision algorithms using Bin slot in RFID system. In the proposed algorithms, if the reader memorizes the Bin slot information, it can reduce the repetition of unnecessary PingID command and the time to identify tags. If we also use ScrollA11ID command in the proposed algorithm, the reader knows the sequence of collided E bits. Using this sequence, the reader can reduce the repetition of PingID command and tag identification time. We analyze the performance of the proposed anti-collision algorithms and compare the performance of the proposed algorithms with that of the conventional algorithm. We also validate analytic results using simulation. According to the analysis, for the random tag n, comparing the proposed algorithms with the conventional algorithm, the performance of the proposed algorithms is about $130\%$ higher when the number of the tags is 200. And for the sequential tag ID, the performance of the conventional algorithm decreases. On the contrary, the performance of the proposed algerian using ScrollA11ID command is about $16\%$ higher than the case of using random tag ID.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.86-86
• /
• 2004

• International Journal of Contents
• /
• v.2 no.1
• /
• pp.34-38
• /
• 2006

In this paper, an overview of anti-collision algorithm for RFID system of a standard EPC Class1 protocol is presented, and the binslotted dynamic search algorithm (BDS) based upon the slotted ALOHA and binary tree procedure is proposed and analyzed. Also, the performance is evaluated as comparing the BDS algorithm with the standard bin-slotted algorithm (BSA) through the simulation program. The performance of the proposed BDS algorithm is improved by dynamically identifying the collided-bit position and the collided bins stored in the stack of the reader. As the results, the number of request command that a reader send to tags in the reader s interrogation zone and the total recognition time are decreased to 59% as compared with BSA algorithm. Therefore, the tag identification performance is fairly improved by resolving a collision problem using the proposed BDS algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.776-780
• /
• 2011

This paper is concerned with winding design in capacitor-run single phase motor. Winding design in single phase induction motor is more complicated than that in three phase induction motor, because of using concentric winding in the single phase. Various winding designs are possible, and accordingly layout of the slot is calculated by formula. And then accurate design of winding is available. Using the design process in this paper, we can get the base model with slot layout and turns of windings of 1.12 kW single phase induction motor, and it is verified by finite element analysis. In this paper, winding design and winding layout of single-phase induction motor using concentric winding are suggested.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1362-1369
• /
• 2018

A method aimed at improving the beam-wave interaction efficiency by changing the coupling slot configuration has been proposed in the study of extended interaction oscillators (EIOs). The dispersion characteristics, coupling coefficient and interaction impedance of the high-frequency structure based on different types of coupling slots have been investigated. Four types of coupled cavity structures with different layouts of the coupling slots have been compared to improve the beam-wave interaction efficiency, so as to analyze the beam-wave interaction and practical applications. In order to determine the improvement of the coupling slot to a coupled cavity circuit in an EIO, we designed four nine-gap EIOs based on the coupled cavity structure with different coupling slot configurations. With different operating frequencies and voltages takes into consideration, beam voltages from 27 to 33 kV have been simulated to achieve the best beam-wave interaction efficiency so that the EIOs are able to work in the $2{\pi}$ mode. The influence of the Rb and the ds on the output power is also taken into consideration. The Rb is the radius of the electron beam, and the ds is the width of the coupling slot. The simulation results indicate that a single-slot-type EIO has the best beam-wave interaction efficiency. Its maximum output power is 2.8 kW and the efficiency is 18% when the operating voltage is 31 kV and electric current is 0.5 A. The output powers of these four EIOs that were designed for comparison are not less than 1.7 kW. The improved coupling-slot configurations enables the extended interaction oscillator to meet the different engineering requirements better.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.142-155
• /
• 2017

It is anticipated that, in cases in which different train operators share railway network, conflicts may occur among train operators with regard to train operation rate, train priorities, and arrival and departure time; besides this, during times when there is high demand for trains, operators will request train operations intensively, steadily increasing train conflict phenomena. In the present study, train operation sequence, minimum headway, arrival and departure time, train priorities, etc., were analyzed, and while using train departure times as decision variables in variably given train schedules, by adjusting train time requested by train operators, and finally rejecting the train times in cases in which conflict resolution is impossible, so that various constraints can be satisfied, a train slot allocation model was suggested to find the objective function, that is, the maximum number of train slots that can be practically applicable to railway operation.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.2
• /
• pp.34-38
• /
• 2012

In this paper, the particle swarm optimization (PSO) algorithm is adopted to design a modified ring-slot type patch rectenna with a resonance frequency of 2.45GHz. In order to accomplish minimization of dimensions and circular polarization (CP) and harmonic suppression, axial direction slits and side-cuts are added to the patch of the ring. The PSO manipulated this kind of multi-dimensional problem very well, and as a result, the designed rectenna shows a desirable performance of return loss of 21.36dB and axial ratio of 2.92dB at the frequency of 2.45GHz with compact sizing.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.782-783
• /
• 2008

This paper deals with optimum design criteria for premium efficiency of 250kW traction induction motor using response surface methodology (RSM) & finite element method (FEM). The RSM has been achieved to use the experimental design method in combination with Finite Element Method and well adapted to make analytical model for a complex problem considering a lot of interaction of design variables. The proposed procedure allows to define the rotor copper bar shape, stator slot and stator, rotor dimensions starting from an existing motor or a preliminary design.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.33-39
• /
• 2010

In this paper, we propose an improved anti-collision algorithm. We have designed an anti-collision unit using this algorithm for the 18000-6 Type C Class 1 Generation 2 standard (Gen2). The Gen2 standard uses a Q-algorithm for incremental method on the Dynamic Slot-Aloha algorithm. It has basically enhanced performance over the Slot-Aloha algorithm. Unfortunately, there are several non-clarified parts: initial value. If an incorrect value is selected, it causes degradation in performance. To increase throughput and system efficiency, and to decrease tag identification time, we propose an improved anti-collision algorithm. prorosed Q algorithm has an increment of 5% of system efficiency and a decrement of 9% of tag identification time.

• Composites Research
• /
• v.25 no.2
• /
• pp.40-45
• /
• 2012

The comparison of the numerical results with those measured by the experiment showed good agreement. The design of composite joint which is the weakest part in the composite structures has become a very important research area since the composite materials are widely used in the aircraft and machine structure. In this paper, the new composite key joints that minimize the fiber discontinuity and strength degradation of adherend were proposed and their failure loads were evaluated. The failure index and damage area method were used for the failure prediction of the composite key joint. From the tests, the failure load of the composite key joint was 93% larger than that of a mechanical joint and the key joint whose slot depth and edge length were 0.88mm and 20mm had the largest failure load. Also, the analytic failure modes by the failure index and damage area were compared with experimental failure modes.