• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.3
• /
• pp.179-184
• /
• 2011

This study aimed to confirm the effect of molecular weight (MW) in solid dispersion of carvedilol with poly-vinylpyrrolidone (PVP) of various MW. Solid dispersion of carvedilol with PVP was prepared by spray-drying method. Scanning electron microscopy (SEM) was used to analyze the surface of solid dispersion samples. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) were used to analyze the crystalline of solid dispersion. Fourier transform infrared spectroscopy (FT-IR) was used to analyze the change of chemical structure characteristic of solid dispersion. DSC and XRD show that drug crystalline was changed. FT-IR revealed that chemical structure of solid dispersion comparing the chemical structure of drug was changed. The dissolution studies of solid dispersion presented at simulated gastric juice (pH 1.2). The dissolution rate of solid dispersion was dramatically enhanced than pure drug and the MW of PVP has an effect on the release property of carvedilol in solid dispersion. In conclusion, the present study has confirmed the effect of MW of PVP on release property of solid dispersion formulation of carvedilol with PVP.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.2
• /
• pp.409-421
• /
• 2014

This paper deals with the superlinear elliptic problem without Ambrosetti and Rabinowitz type growth condition of the form: $$\{-div\((1+\frac{|{\nabla}u|^{p(x)}}{\sqrt{1+|{\nabla}u|^{2p(x)}}}})|{\nabla}u|^{p(x)-2}{\nabla}u\)={\lambda}f(x,u)\;a.e.\;in\;{\Omega}\\u=0,\;on\;{\partial}{\Omega}$$ where ${\Omega}{\subset}R^N$ is a bounded domain with smooth boundary ${\partial}{\Omega}$, ${\lambda}$ > 0 is a parameter. The purpose of this paper is to obtain the existence results of nontrivial solutions for every parameter ${\lambda}$. Firstly, by using the mountain pass theorem a nontrivial solution is constructed for almost every parameter ${\lambda}$ > 0. Then we consider the continuation of the solutions. Our results are a generalization of that of Manuela Rodrigues.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.434-440
• /
• 2014

We prepared nanoparticles containing insoluble celecoxib by the method of solid dispersions using a spray dryer to improve solubility of celecoxib. We used PVP K30 and Eudragit EPO as water-soluble carriers for the solid dispersion, and poloxamer 407 as a surfactant. Characterization of celecoxib solid dispersion was performed by scanning electron microscope (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The results of SEM, DSC and XRD demonstrated that celecoxib is amorphous in solid dispersion. The dissolution rate measured in intestinal juice showed that the method of solid dispersion improved celecoxib solubility as compared with a conventional drug (Celebres$^{(R)}$). In conclusion, solid dispersion formulation prepared by a spray dryer would improve the solubility of celecoxib in oral administration.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.3
• /
• pp.106-111
• /
• 2018

Halide perovskite nanocrystals have become attractive for LED applications due to their high color purity and excellent luminescent properties. $CsPbX_3$ (X = I, Br, and Cl) nanocrystals were synthesized by hot-injection method and the emission wavelength was controlled by changing the composition of halide ion. Green- and red-emitting films were fabricated using a polymer binder. The outstanding optical properties of the synthesized nanocrystals and fabricated films were confirmed. The wLED designed by green- and red-emitting perovskite nanocrystal films on blue InGaN LED was characterized.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.6
• /
• pp.363-369
• /
• 2011

In this study, we demonstrated the release behavior of carvedilol with the content of polyvinylpyrrolidone K-30 (PVP K-30) and the effect of citric acid and fumaric acid as acidifiers on the release behavior of drug. In addition, it tries to inquire into the release behavior difference of the carvedilol according to the manufacturing method. The release behavior of the tablets was compared with Dilatrand$^{(R)}$ in the simulated gastric fluid (pH1.2). Differential scanning calorimeter (DSC), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) were characterized for the physicochemical properties of the tablets. In case of mixing the carvedilol and PVP K-30, in case the ratio of the carvedilol and PVP K-30 was 1:5, the release behavior was the highest among. As well as the dissolution rate of tablets manufactured by lyophilization and rotary evaporator was higher than physical mixture. The dissolution rate of containing acidifiers was more improved. But, rather the excessive amount of the acidifier addition reduced the dissolution rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.371-371
• /
• 2013

사파이어 단결정 웨이퍼는 제조과정에서 결정 성장 조건 및 기계적 연마에 의하여 내부적인 결함이 발생할 수 있다. 사파이어 단결정은 일반적으로 LED용 기판 재료로 사용되며, 내부결함이 발생 시 기판 위의 GaN 등 layer의 결함도 함께 증가하므로 기판의 결함을 줄이는 과정이 중요한 이슈이다. 이 과정에 X-선 토포그래피는 단결정의 내부 결함을 모니터링 하는데 있어서 매우 유용한 방법이다. 이에 본 연구에서는 사파이어 단결정 웨이퍼에 내재하는 결함 형태를 X-선 Lang 토포그래피 방법(X-ray Lang Topography)으로 이미징하여 관찰, 분석하였다. Lang 토포그래피 방법은 X-선 투과법으로 넓은 부분을 우수한 강도와 분해능으로 내부 결함을 관찰할 수 있는 장점을 지니고 있다. X-선 source는 Mo $k{\alpha}$ 1을 사용하였으며, 시료는 c-plane 사파이어 웨이퍼를 사용하였다. 사파이어 웨이퍼의 (110), (102) 회절면의 X-선 토포그래피 이미지를 통해 전위 결함의 유형에 따른 이미지 패턴의 형성 메커니즘에 대해 연구하였고, 측정 회절면과 두께, 표면 데미지에 따른 전위 결함 이미지의 변화를 확인하였다. X-선 토포그래피 이미지를 통해 단결정 c-plane 사파이어 웨이퍼의 전위 결함의 형성 메카니즘 연구와 유형별 이미지와 회절면, 두께, 표면 데미지에 따른 이미지 변화 등을 확인하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.58.2-58.2
• /
• 2011

Park, Gott, & Choi (2008) found that when a galaxy is located within the virial radius from its closest neighbor and the neighbor is an elliptical, the probability of the galaxy to be an elliptical is very sensitive to the large-scale background density over a few Mpc scales. They suggested that the large-scale dependence can be arise if the temperature of a diffuse hot gas held by elliptical galaxies are higher in higher density environment. In this study, to understand the large-scale environment affects the X-ray properties of individual galaxies, we investigated the dependence of the X-ray luminosities of the elliptical galaxies on the large-scale environment using X-ray and optical data which we selected from the ROSAT All-Sky Survey and the Sloan Digital Sky Survey Data Release 7. To exclude galaxies embedded in an intra-group/cluster medium which could enhance their observed X-ray luminosity, we used isolated elliptical galaxies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.3
• /
• pp.238-243
• /
• 1981

An empirical formula for the mass flow rate in natural convection flume above a spherical heated body which is submerged in a finite fluid contained in a tank was determined. The ratio of depth of submergence to diameter of the sphere for which the sphere sensed as infinite medium was found to be bigger than 7. A dimensionless heat transfer correlation for the natural convection from a sphere was determined for Gr.Prq etween 7x10$\^$7/ and 2x10$\^$8/ also.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.949-955
• /
• 2014

Let ${\Phi}_n(x)={\sum}^{{\phi}(n)}_{k=0}a(n,k)x^k$ denote the n-th cyclotomic polynomial. In this note, let p < q < r be odd primes, where $q{\not{\equiv}}1$ (mod p) and $r{\equiv}-2$ (mod pq), we construct an explicit k such that a(pqr, k) = -2.