• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.12
• /
• pp.585-587
• /
• 2005

In this paper, We studied two methods to measure optical characteristics of an electrodeless light source using the integrating sphere(diameter 1.5m). One is to use a center measurement method and the other is to use a side measurement method. As a result of analysis, a side measurement methode without auxiliary lamp is almost similar against a center measurement with auxiliary lamp to reduce a measurement of an error for luminous flux, luminous efficacy and spectral distribution etc. Therefore, Sample which cannot measured by reason of big size and heavy weight can be measured by a side measurement method.

• Journal of KIISE:Software and Applications
• /
• v.28 no.9
• /
• pp.662-668
• /
• 2001

Since the problem of disproving a tautology is as hard as the problem of proving it, no polynomial time algorithm for falsification(or testing invalidity) is feasible. Previous algorithms are mostly based on either divide-and-conquer or graph representation. Most of them demonstrated satisfactory results on a variety of input under certain constraints. However, they have experienced difficulties dealing with big input. We propose a new falsification algorithm using a Merge Rule to produce a counterexample by constructing a minterm which is not satisfied by an input expression in DNF(Disjunctive Normal Form). We also show that the algorithm is consistent and sound. The algorithm is based on a greedy method which would seek to maximize the number or terms falsified by the assignment made at each step of the falsification process. Empirical results show practical performance on big input to falsify randomized nontautological problem instances, consuming O(nm$^2$) time, where n is the number of variables and m is number of terms.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.6-8
• /
• 2005

Study that uses geometrical information in computer vision is lively. Problem that should be preceded is matching problem before studying. Feature point should be extracted for well matching. There are a lot of methods that extract feature point from former days are studied. Because problem does not exist algorithm that is applied for all images, it is a hot water. Specially, it is not easy to find feature point in endoscope image. The big problem can not decide easily a point that is predicted feature point as can know even if see endoscope image as eyes. Also, accuracy of matching problem can be decided after number of feature points is enough and also distributed on whole image. In this paper studied algorithm that can apply to endoscope image. SIFT method displayed excellent performance when compared with alternative way (Affine invariant point detector etc.) in general image but SIFT parameter that used in general image can't apply to endoscope image. The gual of this paper is abstraction of feature point on endoscope image that controlled by contrast threshold and curvature threshold among the parameters for applying SIFT method on endoscope image. Studied about method that feature points can have good distribution and control number of feature point than traditional alternative way by controlling the parameters on experiment result.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1071-1072
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• International Journal of Internet, Broadcasting and Communication
• /
• v.4 no.1
• /
• pp.8-12
• /
• 2012

The purpose of this study is to review the possible effect of the learning paradigm shift from traditional method to ubiquitous learning. What are the societal issues that need to be address in order to design a new pedagogical platform trending from e-learning to m-learning and now the u-learning? That without the proper study of how learning environment may affect the learning process of an individual will lead to poor quality of education. This new era of learning environment offer a big opportunity for "anytime, anywhere" learning. Thus, Lifelong learning is at hand of everyone. Maximizing the benefit of new trend will be a great help and addressing the limitations will lead to quality education.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.5
• /
• pp.75-84
• /
• 2004

Loess, PAC, MACF and plants were applied to the control of the phytoplankton bloom in laboratory and in field, In field experiment using oil fence, 5ppm concentration of coagulant(PAC) was observed to be effective in controlling the cyanobacterial bloom, resulting in 90% removal of cyanobacteria and phytoplankton from the water column, hi case of Synedra sp., however, only 50% of biomass decreased with the same PAC concentration. MACF(micro-air bubble coagulation and floating), a kind of physicochemical method, was applied to the column of the Kyongan stream and resulted in over 80% chlorophyll a and 73.5% TP removal, Chlorophyll a and total phosphorus were effectively removed from water body when 2.0 g/L of loess with the particle radius of 125 ${\mu}m$ was inputted. In case of experiments involving plants, big cone pine, gingko, and pine needle were observed to be effective in restraining phytoplankton bloom at 0.5g/200ml level. During a field test done at Kyungan stream, where Microcystis heavily occurred, Pine needle and big cone pine were observed to be effective on suppressing algal growth.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.86-94
• /
• 2004

This study was conducted to mesh selectivity of Beam trawl for shrimps fishing experiment in the coastal waters around Geomundo, South sea of Korea, during from Oct. to Nov. 2002. The selectivity parameters of big head shrimp (Solenocera melantho) have been studied on the covered con-end method. with mesh of 8, 38, 51 and 61 mm. Selection curves and selection parameters were calculated by using a logistic function S=1/(1+exp-(aCL+b)). The mesh selection master curves were estimated by S=1/(1+exp$^{({\alpha}(CL/M)+{\beta}}$), and the optimum mesh size were calculated with (L/M)50 of master curve. Optimum mesh size and selectivity master curves for the southern rough shrimp (Yrachysalambria curvirostris) and smoothshell shrimp (Parapenaeopsis tenella) optimum mesh size and selectivity master curves were estimated by big head shrimp master curves. The results obtained are summarized as follows : Selection parameters '${\alpha}$' and '${\beta}$' of the master curve for big head shrimp were 8.84 and -5.89, and The selection factor of the master curve (L/M)$_{50}$ was 0.67. The optimum mesh size of minimum length for sexual maturity for big head shrimp was 30.7 mm. Estimated (L/M)$_{50}$ for southern rough shrimp and smoothshell shrimp by using the master curve of big head shrimp was 0.73 and the optimum mesh sizes were 25.5 mm for southern rough shrimp and 16.9 mm for smoothshell shrimp, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.326-337
• /
• 2020

This study examined the public interest in high school Korean language instruction and the universal design for learning (UDL) using the social big data analysis method. The observations from 10,339 search results led to the conclusion that public interest in UDL was significantly lower than that of high school Korean language instruction. The results of the Big Data Association analysis showed that 17.22% of the terms were found to be related to "curriculum." In addition, a survey was conducted on a total of 330 high school students to examine how their teachers apply UDL in the classroom. High school students perceived computers as the most frequently used technology tool in daily classes (38.79%). Teacher-led lectures (52.12%) were the most frequently observed method of instruction. Compared to the second-year and third-year students, the first-year students appreciated the usage of technology tools and various instruction mediums more frequently (ps<.05). Students were relatively more positive in their response to the query on the provision of multiple means of representation. Consequently, the lesson contents became easier to understand for students with the availability of various study methods and materials. The first-year students were generally more positive towards teachers' incorporation of UDL.

• Structural Engineering and Mechanics
• /
• v.58 no.3
• /
• pp.555-576
• /
• 2016

In this paper an efficient approach is introduced for design and analysis of double-layer grids including both geometrical and material nonlinearities, while the results are compared with those considering material nonlinearity. Optimum design procedure based on Enhanced Colliding Bodies Optimization method (ECBO) is applied to optimal design of two commonly used configurations of double-layer grids. Two ranges of spans as small and big sizes with certain bays of equal length in two directions are considered for each type of square grids. ECBO algorithm obtains minimum weight grid through appropriate selection of tube sections available in AISC Load and Resistance Factor Design (LRFD). Strength constraints of AISC-LRFD specifications and displacement constraints are imposed on these grids.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.677-682
• /
• 2012

For the product with small diameter, long column, and parabolic shape, the forging formability of the high-carbon steel wire rod was investigated in this study. By using the three-dimensional finite element method, the formability of wire was reviewed by forming analysis for the desired parabolic shape of local part. Analysis results due to forging direction, forging velocity, friction coefficient and constraint location were also investigated. On the basis of these results, it is noted that the forging direction has the big influence when the product with long column is forged. As the forging velocity increases, buckling tends to be limited and formability of parabolic shape is improved. By constraining the lower parabolic shape part to suppress plastic strain, the effect depending on friction coefficient is not almost appeared. And good parabolic shape is obtained at the region of the forging velocity of more than 0.5 m/s.