• 한국표면공학회지
• /
• 제50권5호
• /
• pp.352-359
• /
• 2017

The growth of nanocrystalline diamond films on a p-type poly silicon substrate was studied using microwave plasma chemical vapor deposition method. A 6 mm thick poly silicon plate was mirror polished and scratched in an ultrasonic bath containing slurries made of 30 cc ethanol and 1 gram of diamond powders having different sizes between 5 and 200 nm. Upon diamond deposition, the specimen scratched in a slurry with the smallest size of diamond powder exhibited the highest diamond particle density and, in turn, fastest diamond film growth rate. Diamond deposition was carried out applying different DC bias voltages (0, -50, -100, -150, -200 V) to the substrate. In the early stage of diamond deposition up to 2 h, the effect of voltage bias was not prominent probably because the diamond nucleation was retarded by ion bombardment onto the substrate. After 4 h of deposition, the film growth rate increased with the modest bias of -100 V and -150 V. With a bigger bias condition(-200 V), the growth rate decreased possibly due to the excessive ion bombardment on the substrate. The film grown under -150V bias exhibited the lowest contact angle and the highest surface roughness, which implied the most hydrophilic surface among the prepared samples. The film growth rate increased with the apparent activation energy of 21.04 kJ/mol as the deposition temperature increased in the range of $300{\sim}600^{\circ}C$.

• 대한원격탐사학회지
• /
• 제27권6호
• /
• pp.653-662
• /
• 2011

Land surface temperature (LST) is a one of the key variables of land surface which can be estimated from geostationary meteorological satellite. In this study, we have developed the three sets of LST retrieval algorithm from MTSAT-2 data through the radiative transfer simulations under various atmospheric profiles (TIGR data), satellite zenith angle, spectral emissivity, and surface lapse rate conditions using MODTRAN 4. The three LST algorithms are daytime, nighttime and total LST algorithms. The weighting method based on the solar zenith angle is developed for the consistent retrieval of LST at the early morning and evening time. The spectral emissivity of two thermal infrared channels is estimated by using vegetation coverage method with land cover map and 15-day normalized vegetation index data. In general, the three LST algorithms well estimated the LST without regard to the satellite zenith angle, water vapour amount, and surface lapse rate. However, the daytime LST algorithm shows a large bias especially for the warm LST (> 300 K) at day time conditions. The night LST algorithm shows a relatively large error for the LST (260 ~ 280K) at the night time conditions. The sensitivity analysis showed that the performance of weighting method is clearly improved regardless of the impacting conditions although the improvements of the weighted LST compared to the total LST are quite different according to the atmospheric and surface lapse rate conditions. The validation results of daytime (nighttime) LST with MODIS LST showed that the correlation coefficients, bias and RMSE are about 0.62~0.93 (0.44~0.83), -1.47~1.53 (-1.80~0.17), and 2.25~4.77 (2.15~4.27), respectively. However, the performance of daytime/nighttime LST algorithms is slightly degraded compared to that of the total LST algorithm.

• 터널과지하공간
• /
• 제13권5호
• /
• pp.344-352
• /
• 2003

시추공 또는 선형조사선과 같은 1D측선에서 측정된 절리 자료의 샘플링 편향을 보정하는 절차를 기술하였다. ID 측선에서 절리가 관측될 수 있는 확률은 측선 방향에 대한 절리의 상대적인 방향 이외에도 절리 크기, 절리 모양 및 측선 길이 등의 복합적 요인에 의하여 결정될 수 있다. 본 연구에서는 절리의 모양을 원판형이라 가정하고 절리의 방향 및 크기에 의하여 나타날 수 있는 절리 자료의 방향 편향 효과를 동시에 보정할 수 있는 방법론을 제시하고, 현장적용을 통하여 방향 편향 보정이 절리군의 방향분포에 미치는 영향에 대하여 고찰하였다. 또한, 유한 길이의 측선으로부터 산정된 절리군의 간격분포는 샘플링 영역인 측선 길이에 따라 다르게 나타날 수 있으며, 이와 같은 간격 편향에 대한 보정절차를 기술하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.127-130
• /
• 2002

Step-edge dc SQUID magnetometers have been fabricated on sapphire substrate. Ce$O_{2}$ buffer layer and $YBa_{2}$$Cu_{3}$ $O_{7}$(YBCO) films were deposited in-situ on the low angle (~$35^{\circ}$)steps formed on the substrates. Typical 5-$\mu$m-wide junction has $R_{N}$ of 4 $\Omega$ and $I_{c}$ of 60 $\mu$A with $I_{c}$$R_{N}$ product of 240 $\mu$V at 77 K. According to applied bias current, depth of voltage modulation was changed and maximum voltage was measured 100~300 fT/$\checkmark$ Hz at 100 Hz, and about 1.5 pT/$\checkmark$ Hz at 1 Hz. For ac bias reversal method, field noise was decreased in the 1/f region. The QRS peak of magneto-cardiogram was measured 50 pT in the magnetically shielded room.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.7-12
• /
• 2003

The test results for water repellency of paper and paperboard according to KS M 7057 can readily be influenced by an operator's bias. In order to discard such bias, the automatic analysis program of water repellency was developed based on different shape features of a liquid trace formed on a specimen. That is, the shape of a liquid track flowing down on the specimen with an angle of $45^{\circ}$ was evaluated according to width variation between head and tail of the trace($S_{Hr}$), uniformity of a liquid flow($S_{d}$), length of long traces($L_{SHr}$), eccentricity of liquid traces($E_{i}$), and then was recognized as a specific degree of water repellency. Finally, the automatic analysis system of water repellency based upon KS M 7057 made it possible to readily measure water resistance of paper and paperboards classified into R0 to R10.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.843-847
• /
• 2014

In Super Junction (SJ) MOSFETs, charge balance is the most important issue of the SJ fabrication process. In order to achieve the best electrical characteristics, such as breakdown voltage and on-resistance, the N-type and P-type drift regions must be fully depleted when the drain bias approaches the breakdown voltage, which is known as the charge balance condition. In conventional charge balance analysis, based on multi-epi process SJ MOSFETs, analytical model has only N, P pillar width and doping concentration parameter. But applying a conventional charge balance principle to trench filling process, easier than Multi-epi process, is impossible due to the missing of the trench angle parameter. To achieve much more superior characteristics of on-resistance in trench filling SJ MOFET, the appropriate trench angle is necessary. So in this paper, modulated charge balance analysis is proposed, in which a trench angle parameter is added. The proposed method is validated using the TCAD simulation tool.

• 척추신경추나의학회지
• /
• 제14권1호
• /
• pp.39-47
• /
• 2019

Objectives : The purpose of this study was to evaluate the scientific literature demonstrating the effectiveness of Chuna manual therapy (CMT) in the treatment of spinal scoliosis. Methods : A literature search was conducted using eight electronic databases to identify all randomized controlled clinical trials (RCTs) that investigated CMT as a treatment for spinal scoliosis. The Cochrane risk of bias tool was used to assess the methodological quality of each RCT. Results : Five RCTs met our inclusion criteria and were included in the analysis. These studies demonstrated positive results of CMT with respect to the reduction of Cobb's angle, vertebral rotation angle score, bending test score, and efficacy rate compared with brace treatment. Positive results were also assured, in terms of the reduction of Cobb's angle, pulmonary function, and efficacy rate when comparing CMT combined with other therapy with brace treatment, gymnastic training, or traction therapy. Conclusions : This review has identified encouraging and limited evidence of CMT for the treatment of spinal scoliosis. However, to obtain stronger evidence, without the disadvantages of study design and quality, we recommend that treatment effectiveness of CMT for spinal scoliosis is investigated further using a well-designed RCT.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.106-110
• /
• 2012

Oblique angle deposition (OAD) is a physical vapor deposition where incident vapor flux arrives at non-normal angles. It has been known that tilting the substrate changes the properties of the film, which is thought to be a result of morphological change of the film. In this study, OAD has been applied to prepare single and multilayer TiN films by cathodic arc deposition. TiN films have been deposited on cold-rolled steel sheets and stainless steel sheet. The deposition angle as well as substrate temperature and substrate bias was changed to investigate their effects on the properties of TiN films. TiN films were analyzed by color difference meter, scanning electron microscopy, nanoindenter and x-ray diffraction. The color of TiN films was not much changed according to the deposition conditions. The slanted and zigzag structures were observed from the single and multilayer films. The relation between substrate tilting angle (${\alpha}$) and the growth column angle (${\beta}$) followed the equation of $tan{\alpha}=2tan{\beta}$. The indentation hardness of TiN films deposited by OAD was low compared with the ones prepared at normal angle. However, it has been found that $H^3/E^2$ ratio of 3-layer TiN films prepared at OAD condition was a little higher than the ones prepared at normal angle, which can confirm the robustness of prepared films.

• 로봇학회논문지
• /
• 제7권3호
• /
• pp.205-215
• /
• 2012

A GPS sensor is widely used in many areas such as navigation, or air traffic control. Particularly, the car navigation system is equipped with GPS sensor for locational information. However, when a car goes through a tunnel, forest, or built-up area, GPS receiver cannot get the enough number of satellite signals. In these situations, a GPS receiver does not reliably work. A GPS error can be formulated by sum of bias error and sensor noise. The bias error is generated by the geometric arrangement of satellites and sensor noise error is generated by the corrupted signal noise of receiver. To enhance GPS sensor accuracy, these two kinds of errors have to be removed. In this research, we make the road database which includes Road Database File (RDF). RDF includes road information such as road connection, road condition, coordinates of roads, lanes, and stop lines. Among the information, we use the stop line coordinates as a feature point to correct the GPS bias error. If the relative distance and angle of a stop line from a car are detected and the detected stop line can be associated with one of the stop lines in the database, we can measure the bias error and correct the car's location. To remove the other GPS error, sensor noise, the Kalman filter algorithm is used. Additionally, using the RDF, we can get the information of the road where the car belongs. It can be used to help the GPS correction algorithm or to give useful information to users.

• 감성과학
• /
• 제23권4호
• /
• pp.3-20
• /
• 2020

본 연구의 목적은 노화에 따라 나타나는 시공간 주의배분능력과 정서지각 편향성의 변화에 대해 탐구하는 것이다. 본 연구에서는 시공간 주의배분능력을 측정하기 위해 useful field of view (UFOV) 과제와 정서지각 편향성을 측정하기 위해 정서지각과제(emotional perception task)를 사용하였다. 본 연구에는 노인 집단의 23명과 청년 집단의 25명의 총 48명의 실험참가자가 참여하였다. 실험 결과, UFOV 과제에서는 노인 집단이 청년 집단에 비해 느린 반응속도와 낮은 정답률을 보여 노인 집단이 청년 집단보다 저하된 시공간 주의배분능력을 가지고 있다는 것을 나타냈다. 또한, 정서지각과제에서는 노인 집단이 청년 집단에 비해 긍정적 정서지각 편향성과 부정적 정서지각 편향성 모두 크게 나타났다. 상관분석 결과에서는 정서지각과제의 정답률에 대한 부정적 정서지각 편향성이 UFOV 과제의 시야각 30° 조건의 반응속도와 유의미한 정적 상관관계가 나타났다(r=.289). 또한, 정서지각과제의 정답률에 대한 긍정적 정서지각 편향성은 UFOV 과제의 모든 시야각 조건들의 정답률과 유의미한 정적 상관관계가 나타났으며(r=.305, r=.322, r=.299), 반응속도와 유의미한 부적 상관관계가 나타났다(r=-.345, r=-.295, r=-.308). 이러한 결과는 노화가 저하된 시공간 주의배분능력 그리고 긍정적 정서지각 편향성과 부정적 정서지각 편향성의 증가와 관련있다는 것을 의미하고, 노화에 따라 나타나는 긍정적 및 부정적 정서지각 편향성은 저하된 시공간 주의배분능력과 관련성이 있는 것으로 여겨진다.