• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.235-236
• /
• 2006

The disk cam mechanism can produce a positive motion with relatively few components. This paper introduce a shape design of cam using the relative velocity method and a precision machining technology for using Bi-arc method. The paper gives a machining information at each point using the Bi-arc method and the analysis method of the cutting error due to the moving path of the cutter, so that we can lead to the optimum design in a disk cam mechanism.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.79-86
• /
• 2002

As consumer electronics, information, and aero-space industry grow, the demand for aspheric lens increases higher. To enhance the precision and productivity of aspheric surface, a CAM system for ultra-precision aspheric surface needs to be realized. In this study, the developed CAM system can generate NC code fur various aspheric surfaces fast and precisely by a new bi-arc interpolation method that the location of maximum error is fixed at an efficient point. The newly developed bi-arc meets the given tolerance more precisely, performs faster calculation. The cutting condition input module and the NC code verification module are adequate to ultra-precision machining, so that a operator can obtain products fast and easily.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1029-1034
• /
• 2003

The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.289-290
• /
• 2007

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.359-365
• /
• 1995

The grain boundary effect on the ionic conductivity was investigated using a.c. admittance analysis in (Bi2O3)0.715(CaO)0.285 oxygen-ion conducting solid electrolyte. As a separated arc representing grain boundary polarization was not observed in the admittance plane, bulk conductivity was measrued for samples with various grain sizes in the temperature range from 48$0^{\circ}C$ to 72$0^{\circ}C$ and the conductivity distribution between grain interior and grain boundary was determined by the reported analytical methods. In the above temperature range, grain boundary worked as a high conductive path instead of blocking layer and ionic conduction through grain boundary was significant. The activation energy for conduction through grain and grain boundary was 78 and 106 kJ/mol, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3011-3015
• /
• 2009

Structural and thermo-analytical studies were carried out to understand the phase formation kinetics of the single phase $Bi_5Ti_3FeO_{15}$ (BTFO) nanocrystals in $Bi_2O_3-Fe_2O_3-TiO_2$, during the polymerized complex (PC) synthesis method. The crystallization of Aurivillius phase $Bi_5Ti_3FeO_{15}$ layered perovskite was found to be initiated and achieved under the temperature conditions in the range of ${\sim}$800 to 1050$^{\circ}C$. The activation energy for grain growth of $Bi_5Ti_3FeO_{15}$ nanocrystals (NCs) was very low in case of NCs formed by PC (2.61 kJ/mol) than that formed by the solid state reaction (SSR) method (10.9 kJ/mol). The energy involved in the phase transformation of Aurivillius phase $Bi_5Ti_3FeO_{15}$ from $Bi_2O_3-Fe_2O_3-TiO_2$ system was ${\sim}$ 69.8 kJ/mol. The formation kinetics study of $Bi_5Ti_3FeO_{15}$ synthesized by SSR and PC methods would not only render a large impact in the nanocrystalline material development but also in achieving highly efficient visible photocatalysts.

• Spatial Information Research
• /
• v.2 no.2
• /
• pp.147-163
• /
• 1994

This paper presents three methods of generating the transportation network data out of the topological geographic database in the hope that the conversion of the geographic database file containing the topology to the conventional node-link type trans¬portation network file may facilitate the integration between transportation planning mod¬els and GIS by alleviating the inherent problems of both computing environments. One way of the proposed conversion method is to use the conversion software that allows the bi-directional conversion between the UTPS (Urban Transportation Planning System) type transportation planning model and GIS. The other two methods of data structure conversion approach directly transform the GIS's user-level topology into the transportation network data topology, and have been introduced with codes programmed with FORTRAN and AML (Arc Macro Language) of ARC/INFO. If used successfully, any approach would not only improve the efficiency of transportation planning process and the associated decision-making activities in it, but enhance the productivity of trans¬portation planning agencies.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.12-18
• /
• 2007

As an arc fault interrupter, the AFCI mentioned in this paper has been designed to detect and interrupt arc faults due to wire deterioration, insulation, wire damage, loose connection, and excessive mechanical damage. Since AFCI is digital and uses mechanical and electric stress, the length of interruption against overload and over-current is much shorter than the current bi-metal method. Therefore, the risk of electrical fires has been reduced.

• Survey Research
• /
• v.10 no.1
• /
• pp.113-139
• /
• 2009

It is desirable to use a monthly benchmarked construction indicator which contains the characteristics of statistical data in an annual survey in order to analyze the cyclical phenomenon of the construction activity. The benchmarked indicator is expected to improve the data quality in terms of accuracy, consistency, comparability, and completeness. In this paper, benchmarking methodologies of compiling monthly construction indicators arc researched by using a monthly prompt data holding short - term fluctuations and an annual survey data regarded as more accurate statistics than monthly data. The benchmarking is the methodology by which a high frequency data should he adjusted in order to hold the short-term and cyclical phenomena, and the long - term trend of two data groups with ensuring the consistency of an annual summation between a high frequency data and a low frequency data. This paper considered the numerical approach like pro rata distribution method, proportional Denton method, EFL or HP filter Benchmark - to - Indicator ratio method, and the model - based approach such as Chow and Lin method, $Fem{\acute{a}}ndez$ method. Also, the benchmarked construction indicators were estimated by early mentioned benchmarking methods with practical data, and these methods were empirically reviewed and compared. In case of construction indicators with severe seasonal fluctuations and irregulars, the numerical approach seemed to be performed more correctly than the model- based approach. Among numerical methods, the proportional Denton method used in general was a little nice. The HP filter Benchmark - to - Indicator ratio method may be considered with survey errors or measurement errors in an annual survey data.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.255-262
• /
• 1994

Arc melted Ti-5Bi alloy was oxidized by thermal oxidation method. In the present study free energy efficiency(${\eta}_e$) of titanium oxide electrode(TOE) was measured as a function of light intensity and light energy. Flat-band potential of TOE was measured as a function of the light intensity and the solution pH. The ${\eta}_e$ of TOE increased with the increase of light intensity and tight energy to maximum value of 3.2% and 13%, respectively, at $0.2W/cm^2$ and 4.0eV. The ${\eta}_e$ was strongly dependent on the magnitude of the bias voltage. Maximum value was found at 0.5V bias. Photocurrent of TOE was controlled by electron-hole pair generation in depletion layer. The flat-band potential of the illuminated TOE shifted to -0.065V/decade with increasing light intensity. With the decrease of pH of electrolyte, flat-band potential shifted to anodic direction. The experimental slope was in good agreement with the Nernstian value of 0.059V/pH decade.