• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.69-72
• /
• 2004

In order to use HTS tape on electric power applications, such as cable, motor, transformer, fault current limiter, a long length of HTS tape with a good uniformity of critical current is inevitable. The longer length of HTS tape, the wider in the range of application and the lower cost of HTS tape. In this study three long length Bi-2223/Ag tapes(268m, 253m and 187m) were fabricated. Critical current uniformity along the length was greatly improved through the optimization of cold deformation and thermo-mechanical process. Average critical current of the tapes was 63.2 A, 54.6 A and 64.2 A, respectively Critical tensile strength and critical bending radius (77 K, 5 % Ic degradation) was 135 MPa and 56 m, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.150.4-150
• /
• 2001

The geometry PIG provides pipeline operators with continuous measurement of pipe centerline coordinates, bend radius, displacement, and bending strain in a single pass through the pipeline. This study introduces the developed geometry PIG(Pipeline Inspection Gauge) which is used for geometry surveys. This tool is equipped with the several sensor systems. The Inertial Navigation System (INS) comprises angle rate gyros and linear accelerometers. The system measures the precise path of the PIG during its traverse of the pipeline. This system is also used to produce a detailed map of the lire, measure curvature. Odometers measure the PIG´s distance moved along the line and instantaneous speed during the PIG run. Caliper sensors measure pipeline ...

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.418-419
• /
• 2008

관로에 케이블을 포설할 때에는 최대포설장력(Maximum Pulling Tension Factors)과 허용측압(Sidewall Bearing Pressure)이 고려되어야 한다. 최대포설장력은 케이블의 무게와 관로의 마찰계수에 의해 계산이 되고 관로의 경간에 의해 변화하게 된다. 측압은 관로의 곡률반경, 포설장력, 케이블 무게 등과 직접 관련이 있다. 관로의 곡률반경은 현장에서 도로의 길이와 현의길이, 호의 높이 등을 측정하여 구하기도 하고 도면상에서 계산에 의해 구하기도 한다. 곡률반경과 포설장력, 측압의 관계성을 비교해 보면 포설장력은 곡률반경의 영향을 거의 받지 않지만 측압은 곡률반경의 영향을 크게 받는다. 허용측압이상의 측압이 굴곡부에서 관로와 케이블사이에 발생하면 관로와 케이블이 손상되기 때문에 관로 설계시에는 측압을 반드시 고려하여야 된다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.144-147
• /
• 2002

In this study, springback analysis of side rear member is carried out. Side rear member is one of the parts which shows severe springback problems. Forming, trimming, flanging and springback stages can be analyzed successively. From forming analysis, we identified the possible spots in which tearing may occur and can prevent failure. In springback analysis we used the boundary conditions same as applied to the blank on the checker so that the computational result can be compared with experimental one. Form .the comparison, springback analysis can yield relatively good results in a qualitative sense. However, in order to get good deformation result quantitatively, there still remains unsettled tasks in the forming analysis with very small die radius. It is found that we have to develop the element with better bending characteristics and precise contact treatment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.770-778
• /
• 1986

This paper is studied on the Junctiion of the large tank and the cylinderical outlet such as a pressure vessel attached a pipe or nozzle theoretically. It is assumed that the diameter of tank is much larger than that of the nozzle, so it can be approximated that nozzle is attached to plate. The analysis procedure can be viewed as the solution of interdependent subproblems: (a) the stress analysis of the cylinderical shell(nozzle), (b) the plane-stress analysis of the plate membrane problem, and (c) the analysis of the transverse bending deformation in the plate. On the procedure of (a), the Flugge formula are used, and the variables are the length and the ratio of the thickness to the radius of cylinderical shell. The solutions of thess problems are interrelated in the total solution through continuity and equilibrium conditions at the interface of middle planes of the plate and cylinderical shell.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.476-479
• /
• 2005

We developed a plastic bistable LCD based on the suspension of sub-micron ferroelectric particles in a cholesteric liquid crystal. 2.5 inch $160{\times}160$ pixel display with enhanced contrast and improved electro-optical characteristics was achieved. The display is extremely light and possesses good flexibility, demonstrating multifold bending in a radius about 1.5 cm.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.615-623
• /
• 2000

The industrial application of hydroforming has a great potential in saying cost and achieving dimensional accuracy in automotive industry presently. The aim of the following article is to investigate the effect of process parameters on hydroformed part. Firstly, we have to investigate the change of mechanical properties for sheet and pipe material according to various radius/thickness ratio(r/t). The change of mechanical properties affects the yield stress more than the total elongation. Increase of yield stress for pipe has a bad influence on formability of hydroforming. Among the roll-forming process, the sizing process didn't change mechanical properties. The process parameters such as the initial pressure, mandrel shape and friction have seriously influenced on formability of hydroforming. Therefore we need to check formability of given material through the FE analysis in the beginning stage of process design and the predicted hydroforming process parameters ate generally a good starting point for the prototype tryout stage. The results of pretending, hydroforming analysis using FE model are good agreement with experimental results.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2017

The conductivity of the electrolyte used plays a critical role in the optimization of the performance of electrochemical double layer capacitors. However, when the difference in the conductivities of different electrolytes is not significant (only 10-20%), the conductivity has little effect on the capacitance. On the other, unlike the conductivity and viscosity of the electrolyte, the cation size directly influences the capacitance. Cyclic ions have a smaller effective radius than that of the corresponding acyclic ions because the acyclic alkyl groups have a greater number of conformational degrees of freedom, such as the rotational, bending, and stretching modes. Consequently, because of the smaller effective size of the cyclic ions, cells containing electrolytes with such ions exhibit higher capacitances than do those with their acyclic counterparts.

• Structural Engineering and Mechanics
• /
• v.22 no.2
• /
• pp.151-167
• /
• 2006

A p-version of the finite element method in conjunction with the modeling dynamic method using the arc-length stretch deformation is considered to determine the bending natural frequencies of a cantilever flexible plate mounted on the periphery of a rotating hub. The plate Fourier p-element is used to set up the linear equations of motion. The transverse displacements are formulated in terms of cubic polynomials functions used generally in FEM plus a variable number of trigonometric shapes functions representing the internals DOF for the plate element. Trigonometric enriched stiffness, mass and centrifugal stiffness matrices are derived using symbolic computation. The convergence properties of the rotating plate Fourier p-element proposed and the results are in good agreement with the work of other investigators. From the results of the computation, the influences of rotating speed, aspect ratio, Poisson's ratio and the hub radius on the natural frequencies are investigated.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.361-364
• /
• 2002

의료용 초음파 진단기는 음축 방향 초점거리의 제어를 위해서 각 진동요소의 전기단자에 전기회로를 이용한 가중치를 부가하는 방식을 사용하고 있다. 그러나 본 연구에서는 단일 PVDF로 구성된 트랜스듀서에 바이몰프 타입의 엑츄에이터를 부가하여 진동요소의 배열이나 전기적 가중치의 부가없이 기계적으로 곡률 반경(R.O.C. : Radius Of Curvature)을 제어하는 방법을 제안하였고, 바이몰프 타입 엑츄에이터에 인가한 전압 변화에 따른 트랜스듀서의 곡률 반경 변화를 측정하여 이에 따른 수중에서의 음장 분포 변화를 시뮬레이션 결과와 비교하였다.