Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference (한국전기전자재료학회:학술대회논문집)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지

Fabrication of long length Bi-2223/Ag HTS tape

Bi-2223/Ag 고온초전도 장선재의 제조

  • 김상철 (넥상스코리아(주) 기술연구소) ;
  • 이동훈 (한국전기연구원 초전도재료연구그룹) ;
  • 하동우 (한국전기연구원 초전도재료연구그룹) ;
  • 오상수 (한국전기연구원 초전도재료연구그룹)
  • Published : 2004.11.11
Download PDF
⟨ Previous Next ⟩

Abstract

In order to use HTS tape on electric power applications, such as cable, motor, transformer, fault current limiter, a long length of HTS tape with a good uniformity of critical current is inevitable. The longer length of HTS tape, the wider in the range of application and the lower cost of HTS tape. In this study three long length Bi-2223/Ag tapes(268m, 253m and 187m) were fabricated. Critical current uniformity along the length was greatly improved through the optimization of cold deformation and thermo-mechanical process. Average critical current of the tapes was 63.2 A, 54.6 A and 64.2 A, respectively Critical tensile strength and critical bending radius (77 K, 5 % Ic degradation) was 135 MPa and 56 m, respectively.

Keywords