• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.206-214
• /
• 2005

Heterogeneously-catalyzed oxidation of aqueous phase trichloroethylene (TCE) over supported metal oxides has been conducted to establish an approach to eliminate ppm levels of organic compounds in water. A continuous flow reactor system was designed to effect predominant reaction parameters in determining catalytic activity of the catalysts for wet TCE decomposition as a model reaction. 5 wt.% $CoO_x/TiO_2$ catalyst exhibited a transient period in activity vs. on-stream time behavior, suggesting that the surface structure of the $CoO_x$ might be altered with on-stream hours; regardless, it is probable to be the most promising catalyst. Not only could the bare support be inactive for the wet decomposition reaction at $36^{\circ}C$, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. Very low TCE conversion appeared for $TiO_2$-supported $NiO_x$ and $CrO_x$ catalysts. Wet oxidation performance of supported Cu and Fe catalysts, obtained through an incipient wetness and ion exchange technique, was dependent primarily on the kinds of the metal oxides, in addition to the acidic solid supports and the preparation routes. 5 wt.% $FeO_x/TiO_2$ catalyst gave no activity in the oxidation reaction at $36^{\circ}C$, while 1.2 wt.% Fe-MFI was active for the wet decomposition depending on time on-stream. The noticeable difference in activity of the both catalysts suggests that the Fe oxidation states involved to catalytic redox cycle during the course of reaction play a significant role in catalyzing the wet decomposition as well as in maintaining the time on-stream activity. Based on the results of different $CoO_x$ loadings and reaction temperatures for the decomposition reaction at $36^{\circ}C$ with $CoO_x/TiO_2$, the catalyst possessed an optimal $CoO_x$ amount at which higher reaction temperatures facilitated the catalytic TCE conversion. Small amounts of the active ingredient could be dissolved by acidic leaching but such a process gave no appreciable activity loss of the $CoO_x$ catalyst.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.988-993
• /
• 2008

The characteristics of NO oxidation using sodium chlorite ($NaClO_2$) powder have been investigated by a flow type packed-bed reactor, where the reaction temperature and the space velocity are varied in the range of $20{\sim}230^{\circ}C$ and $0.4-2.2{\times}10^5hr^{-1}$, respectively, and the simulation gas mixtures are composed of NO (0~200 ppm), $NO_2$ (0-200 ppm), $O_2$ (0~15%) and $H_2O$ (0~15%) within $N_2$ balance. It has been found that the oxidation efficiency of NO depends greatly on the reaction temperature, exhibiting the existence of critical reaction temperature at about $170^{\circ}C$ where the oxidation efficiency of NO is maximized and then abruptly decreased with further increase of reaction temperature, resulting in being negligible over $190^{\circ}C$. Such a behavior in the oxidation efficiency has been originated from the phase transition of $NaClO_2$ at about $170^{\circ}C$ to form $NaClO_3$, and NaCl which are chemically inactive toward the oxidation of NO. The chemical reaction of NO with $NaClO_2$ has been observed to produce $NO_2$, ClNO and $ClNO_2$, whereas that of $NO_2$ only OClO species. Additionally, we have also observed that the introduction of $O_2$ and $H_2O$ has little influence on the oxidation of NO.

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.95-103
• /
• 1994

The safety related components in the nuclear power plant should be designed to withstand the seismic load. Among these components the integrity of reactor internals under earthquake load is important in stand points of safety and economics, because these are classified to Seismic Class I components. So far the modelling methods of reactor internals have been investigated by many authors. In this paper, the dynamic behaviour of reactor internals of Yong Gwang 1&2 nuclear power plants under SSE(Safe Shutdown Earthquake) load is analyzed by using of the simpled Global Beam Model. For this, as a first step, the characteristic analysis of reactor internal components are performed by using of the finite element code ANSYS. And the Global Beam Model for reactor internals which includes beam elements, nonlinear impact springs which have gaps in upper and lower positions, and hydrodynamical couplings which simulate the fluid-filled cylinders of reactor vessel and core barrel structures is established. And for the exciting external force the response spectrum which is applied to reactor support is converted to the time history input. With this excitation and the model the dynamic behaviour of reactor internals is obtained. As the results, the structural integrity of reactor internal components under seismic excitation is verified and the input for the detailed duel assembly series model could be obtained. And the simplicity and effectiveness of Global Beam Model and the economics of the explicit Runge-Kutta-Gills algorithm in impact problem of high frequency interface components are confirmed.

• Journal of dental hygiene science
• /
• v.11 no.6
• /
• pp.471-479
• /
• 2011

This research, which was conducted for dental hygienists, intended to check out what factors have an influence on their behaviors by measuring the level of self-efficacy and consciousness on the use of radiation, knowledge and attitude on radiation safety management(RSM). The subjects were 235 of the dental hygienists and this study performed a survey 8 May to 17 June, 2011. The survey results were as follows. 1. As a result of comparing the average of the self-efficacy according to the general characteristics, a statistically meaningful difference(p<0.05) was found according to health condition, protection facilities condition. 2. As a result of comparing the average of consciousness about radiation use according to the general characteristics, a statistically meaningful difference(p<0.05) was found according to medical institute type, protection facilities conditions. 3. As a result of comparing the average of the behaviors for RSM according to the general characteristics, a statistically meaningful difference(p<0.05) was found according to monthly income, medical institute type, whether or not education on radiation was conducted, the number of education, education type, and protection facilities condition. 4. As a result of analyzing what factors have an influence on the behaviors for RSM by employing the points of those behaviors as a dependent variable and self-efficacy, consciousness, knowledge and attitude as an independent variable in order to investigate those factors, it turned out that the factors which had a relatively larger influence on the point of behaviors were attitude and self-efficacy by that order(p<0.05). In conclusion, we believe that a variety of programs should be offered to provide knowledge on RSM as a prerequisite for improving the level of RSM behaviors by dental hygienists.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.133-146
• /
• 2012

University dining services have received less attention than commercial food services or other institutional food services. Marketing practitioners and researchers recognize the major impact that perceived value has on consumer behavior. The mediating role of value has not been verified in relation to satisfaction in university dining establishments, including Korea. This study intends to investigate the relationships among value, satisfaction and revisit intention of university dining attributes. This study also examines whether university dining service attributes dimensions influence value. Further, this study verifies the role of value as a mediator in the formation of customer satisfaction and revisit intention. Structural Equation Modeling has been applied to the collected data from students of three universities in Korea. The study resulted in that university dining attributes, such as food, menu and convenience, positively affected value of the university dining services. Further analysis with examination of indirect effects confirmed the positive impact of value on satisfaction in university dining services. This study verified the mediating role of value on satisfaction as student's satisfaction is enhanced through the elevation of value of university food services. Enhanced satisfaction via value also led to improvement in revisit intention. This study contributes to the academia by verifying the mediating role of value in the formation of customer satisfaction in a university dining context. This study also offers practical implications to the industry, such as suggestions on developing strategies for value-added products and services to the university dining establishments. This value research for university dining services is also meaningful by triggering future research on market segmentation, product differentiation and positioning policies. In the long run, improving value and satisfaction with university dining services need to be realized to enhance overall college experiences and other competitive advantages, such as student recruitment and enrollment, student academic evaluations, and university reputation.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.266-274
• /
• 2017

The purpose of this study was to analyze the number of visitors to the top of Seoseokdae in Mudeungsan National Park, in which visitors are concentrated, and their visiting patterns, thereby suggesting measures to manage the visitors. The number of annual visitors and the numbers of regional and seasonal visitors to Mudeungsan National Park, which affect the concentration of visits to Seoseokdae were analyzed using the data produced by an automatic digitizing device. A field study was conducted to examine the number of seasonal and periodic visitors to Seoseokdae and their visiting patterns. In 2015, the number of visitors was 2,563,651 and 83.9% of the visitors visited via the Jeungsimsa and Wonhyosa area that is near Gwangju City. This area is close to the Seoseokdae area and it is easy to hike between the areas. Therefore, there was an influx of most visitors to Seoseokdae into the Jeungsimsa and Wonhyosa area. In terms of seasonal visitors, the largest number of visitors came in the fall, followed by the summer, spring, and winter in order. However, the seasonal differences were not notable. There was no statistically significant correlation between the number of visitors and meteorological factors. This result may have been because Gwangju citizens frequently visit Mudeungsan regardless of period and weather. Visitors can get to Seoseokdae via the trails into Wonhyosa and Jangbuljae. A slightly larger number of visitors used the trail into Jangbuljae in the fall and winter, whereas a larger number of visitors used the trail into Wonhyosa in the summer. In general, there is a large influx of visitors into Jangbuljae, a strategic visiting point. However, a slightly larger number of visitors may have chosen the trail into Wonhyosa in the summer because they could hike under the shade of trees. In the summer, visitors stayed in Seoseokdae for a short time with a low level of crowdedness. On the other hand, in the fall and winter, visitors stayed in the area longer because they had lunch and rested. During the time, the number of momentary maximum visitors peaked, causing extreme crowdedness. Therefore, some visitors showed the visiting pattern of entering the grassland outside the designate zone. Because this behavior can damage the grassland on the top of Seoseokdae, which can lead to soil erosion, intensive visitor management may be necessary.

• Korean journal of applied entomology
• /
• v.24 no.4 s.65
• /
• pp.195-201
• /
• 1986

This study was conducted to investigate the life history of Compsidia populnea which is major species of the stem-borers on Populus alba{\times}glandulosa$. Peak emergence of the adult of Compsidia populnea L. was around 10th${\sim}$l2nd of May in Chuncheon vicinities, having one generation a year in Korea. There was a preovipositional period of 10.7 days and a ovipositional period of 14.3.days. Mean adult longevity was 11 days for male and 13.8 days for female. Individual eggs were long oval with somewhat narrowed tip at one side and soft, 2.6mm in length, 0.8mm in diameter, and were laid singly under the U-shaped scars which were made by female before oviposition. Total number of scars per female averaged 56.6 ($8{\sim}135$) and eggs were found in 67.9 percent of the total scars. Egg period was $8{\sim}11$ days at $25^{\circ}C$ constant temperature and $7{\sim}14$ days in the field condition. Early young larvae stayed for $2{\sim}3$ weeks under the scars and then boring into the xylem, forming galls at this time. Size of the gall was 1.8cm($1.3{\sim}2.5$) in length, 1.6cm($1.0{\sim}2.2$) in diameter and the length of mine was everage 3.1cm. Fully grown larvae were developed around the early October and overwintered in the mines of galls. Pupation was done around the early of April. Pupal developmental period averaged 11 days($9{\sim}13$ days) at $25^{\circ}C$ constant temperature condition.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.189-204
• /
• 2013

Today, politics, economy and technique in the world are rapidly changed. To respond to these changes public institutions as well as government and corporate try to change themselves and to adapt these situation and environment. Total payroll costs system which is one of critical methods to adapt changing world began to introduce in 2004 for public services in Korea. After exhibition and enforcement, all education administration in Korea adopted this system in 2013. This study focus on how total payroll costs system can be successfully controled and utilized, and who this system increase organizational effectiveness and efficacy in public services. Organizational members' effort, perspective, attitude and behavior are most important factors for organizational change and new option. Organizational change and adaptation always involve members' change and adaptation, so this study emphasizes on members' perspective and attitude on total payroll costs system. As a result, distribution justice, procedure justice, and receptivity about total payroll costs system are related to organizational performance such as job satisfaction and organizational commitment. This means organizational members' perspective(distribution justice and procedure justice) and attitude(receptivity) are most crucial factors for effectiveness and efficacy of total payroll costs system. Furthermore with distribution justice, procedure justice and receptivity, total payroll costs system would increase members' job satisfaction and organizational commitment. To sum up, members' perspective and attitude are most important factors for change, thus for success of total payroll costs system, we should understand how people are critical, especially their distribution justice, procedure justice, and receptivity; and also how total payroll costs system are valuable system; and how we can control and handle this system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.9-17
• /
• 2017

Characteristics of aerodynamic damping ratios of a helical $180^{\circ}$ model which shows better aerodynamic behavior in both along-wind and across-wind responses on a super tall building was investigated by an aeroelastic model test. The aerodynamic damping ratio was evaluated from the wind-induced responses of the model by using Random Decrement (RD) technique. Further, various triggering levels in evaluation of aerodynamic damping ratios using RD technique were also examined. As a result, it was found that when at least 2000 segments were used for evaluating aerodynamic damping ratio for ensemble averaging, the aerodynamic damping ratio can be obtained more consistently with lower irregular fluctuations. This is good agreement with those of previous studies. Another notable observation was that for square and helical $180^{\circ}$ models, the aerodynamic damping ratios in along-wind direction showed similar linear trends with reduced wind speeds regarding of building shapes. On the other hand, for the helical $180^{\circ}$ model, the aerodynamic damping ratio in across-wind direction showed quite different trends with those of the square model. In addition, the aerodynamic damping ratios of the helical $180^{\circ}$ model showed very similar trends with respect to the change of wind direction, and showed gradually increasing trends having small fluctuations with reduced wind speeds. Another observation was that in definition of triggering levels in RD technique on aerodynamic damping ratios, it may be possible to adopt the triggering levels of "standard deviation" or "${\sqrt{2}}$ times of the standard deviation" of the response time history if RD functions have a large number of triggering points. Further, these triggering levels may result in similar values and distributions with reduced wind speeds and either may be acceptable.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.