• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.103-117
• /
• 2023

This paper presents an investigation on the shear resistance of corrugated web steel beams (CWBs) with a circular web opening. A total of five specimens with different diameters of web openings were designed and tested with vertical load applied on the top flange at mid-span. The ultimate strengths, failure modes, and load versus middle displacement curves were obtained from the tests. Following the tests, numerical models of the CWBs were developed and validated against the test results. The influence of the web plate thickness, steel grade, opening diameter, and location on the shear strength of the CWBs was extensively investigated. An XGBoost machine learning model for shear resistance prediction was trained based on 256 CWB samples. The XGBoost model with optimal hyperparameters showed excellent accuracy and exceeded the accuracy of the available design equations. The effects of geometric parameters and material properties on the shear resistance were evaluated using the SHAP method.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.793-800
• /
• 2006

곡선보(curved beam)의 회전관성(rotatory inertia) 및 전단변형(shear deformation)을 고려한 평면내(in-plane) 자유진동을 해석하는데 미분구적법(DQM)을 이용하여 고정-고정 경계조건(boundary conditions)과 다양한 굽힘각(opening angles)에 따른 진동수(frequencies)를 계산하였다. DQM의 결과는 엄밀해(exact solution) 또는 다른 수치해석(Rayleigh-Ritz, Galerkin 또는 FEM) 결과와 비교하였으며, DQM은 적은 요소(grid points)를 사용하여 정회한 해석결과를 보여주었다.

• 한국지반공학회논문집
• /
• 제36권1호
• /
• pp.29-38
• /
• 2020

최근 환기구, 비상탈출용 수직구, 취수탑 가시설 등 지중 가물막이 또는 차수벽체로 원형 가물막이가 많이 적용되고 있다. 원형단면의 경우 벽체에 작용하는 토압이 원형가물막이 형상에 따라 아칭효과(arching effect)로 인하여 작용토압에 대한 구조체의 부재력이 감소하는 것으로 알려져 있다. 본 연구에서는 원형 가물막이에 대한 2D 유한요소해석(FEM)을 활용하여 원형띠장(ring beam) 강성을 산출 후 탄소성해석에 적용하여 부재의 단면력을 검토하였다. 더불어 3D 유한요소해석(FEM)을 통하여 원형단면의 가물막이가 다각형 형태의 가물막이보다 전단력, 휨모멘트, 그리고 발생변위가 최소값을 갖는 것으로 나타났으며, 이로써 원형단면 가물막이가 구조적으로 보다 효율적인 단면 형태임을 확인하였다

• Steel and Composite Structures
• /
• 제25권4호
• /
• pp.505-521
• /
• 2017

The steel plate shear wall with beam-only connected infill plate (SSW-BO) is an innovative lateral load resisting system consisting of infill plates connected to surrounding beams and separated from the main columns. In this research, the effects of perforation diameter as well as slenderness ratios of infill plates on the hysteresis behavior of SSW-BO systems were studied experimentally. Experimental testing is performed on eight one-sixth scaled one-story SSW-BO specimens with two plate thicknesses and four different circular opening ratios at the center of the panels under fully reversed cyclic quasi-static loading in compliance with the SAC test protocol. Strength, stiffness, ductility and energy absorption were evaluated based on the hysteresis loops. It is found that the systems exhibited stable hysteretic behavior during testing until significant damage in the connection of infill plates to surrounding beams at large drifts. It is also seen that pinching occurred in the hysteresis loops, since the hinge type connections were used as boundaries at four corners of surrounding frames. The strength and initial stiffness degradation of the perforated specimens containing opening ratio of 0.36 compared to the solid one is in the range of 20% to 30% and 40% to 50%, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.37-40
• /
• 2008

세대병합형 리모델링의 경우 벽체의 개구부의 형성이 필수적이다. 그리하여 선행연구를 바탕으로 23%의 개구부면적을 가질 경우 큰 강성의 저하나 강도의 저하가 없다는 판단 아래, 인방보의 형태가 다른 세 실험체를 계획하여 횡력 가력 실험을 실시하였다. 슬래브를 인방보로 가지는 CW-RS는 형상비의 증가에 따른 휨파괴가 지배적이었고, CW-RBS와 CW-CS의 경우 인방보의 모멘트 분담에 의해 벽판의 전단 파괴 현상이 지배적이었다. 인방보의 면적에 따라 강도와 강성의 감소율이 영향을 받았으며 개구부의 형태가 결정하는 인방보와 벽체와의 접합 면적이 벽체의 거동을 지배한다고 생각된다.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.475-502
• /
• 2016

Nanobeams are widely used as a structural element for nanodevices and nanomachines. The development of nano-sized machines depends on proper understanding of mechanical behavior of these nano-sized beam elements. Small length scales such as lattice spacing between atoms, surface properties, grain size etc. are need to be considered when applying any classical continuum model. In this study, Eringen's nonlocal elasticity theory is incorporated into classical beam model considering the effects of axial extension and the shear deformation to capture unique static behavior of the nanobeams under continuum mechanics theory. The governing differential equations are obtained for curved beams and solved exactly by using the initial value method. Circular uniform beam with concentrated loads are considered. The displacements, slopes and the stress resultants are obtained analytically. A detailed parametric study is conducted to examine the effect of the nonlocal parameter, mechanical loadings, opening angle, boundary conditions, and slenderness ratio on the static behavior of the nanobeam.

• Structural Engineering and Mechanics
• /
• 제42권2호
• /
• pp.131-152
• /
• 2012

In-plane free vibrations of circular beams with stepped cross-sections are investigated by using the exact analytical solution. The axial extension, transverse shear deformation and rotatory inertia effects are taken into account. The stepped arch is divided into a number of arches with constant cross-sections. The exact solution of the governing equations is obtained by the initial value method. Several examples of arches with different step ratios, different locations of the steps, boundary conditions, opening angles and slenderness ratios for the first few modes are presented to illustrate the validity and accuracy of the method. The effects of the geometric parameters on the natural frequencies are investigated in details. Several examples in the literature are solved and the results are given in tables. The agreement of the results is good for all examples considered. The mode transition phenomenon is also observed for the stepped arches. Some examples are solved also numerically by using the commercial finite element program ANSYS.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.99-104
• /
• 2002

아크축(arch axis)의 연장(extensibility) 및 회전관성(rotatory inertia)을 고려한 곡선보(curved beam)의 평면내(in-plane) 자유진동을 미분구적법(DQM)을 이용하여 다양한 경계조건(boundary conditions)과 굽힘각(opening angles)에 따른 진동수(frequencies)를 계산하였다. DQM의 결과를 다른 수치해석결과와 비교하였으며, DQM은 적은 요소(grid points)을 사용하여 정확한 해석결과를 보여주었다.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.199-207
• /
• 1999

곡선보(curved beam)의 평면내(in-plane)와 평면외(out-of-plane)의 자유진동을 해석하는데 differential quadrature method (DQM)를 이용하여 다양한 경계조건(boundary conditions)과 굽힘각 (opening angles)에 따른 진동수(frequencies)를 계산하였다. DQM의 결과는 엄밀해(exact solution) 또는 다른 수치해석(Rayleigh-Ritz, Galerkin 또는 FEM) 결과와 비교하였으며, DQM은 적은 요소(grid points)를 사용하여 정확한 해석결과를 보여주었다.

• 소음진동
• /
• 제9권6호
• /
• pp.1193-1199
• /
• 1999

This paper deals with the free vibrations of circular curved beams with thin-walled cross-section. The differential equation for the coupled flexural-torsional vibrations of such beams with warping is solved numerically to obtain natural frequencies and mode shapes. The Runge-Kutta and determinant search methods, respectively, are used to solve the governing differential equation and to compute the eigenvalues. The lowest three natural frequencies and corresponding mode shapes are calculated for the thin-walled horizontally curved beams with hinged-hinged, hinged-clamped, and clamped-clamped end constraints. A wide range of opening angle of beam, warping parameter, and two different values of slenderness ratios are considered. Numerical results are compared with existing exact and numerical solutions by other methods.