• 한국자기학회지
• /
• 제16권1호
• /
• pp.28-33
• /
• 2006

[ $Bi_{2/3}La_{1/3}FeO_3$ ]분말을 졸-겔법을 이용하여 제조하였다. 결정학적 및 자기적 성질을 열분석장치(TG-DTA), x-선 회절분석기(XRD), 주사전자현미경(SEM) 및 Mossbauer분광기를 이용하여 연구하였다. $Bi_{2/3}La_{1/3}FeO_3$ 단일상은 $600^{\circ}C$에서 3시간 동안 공기 중에서 열처리하여 얻을 수 있었으며, x-선 회절분석 결과 $Bi_{2/3}La_{1/3}FeO_3$ 분말은 rhombohedral 형태로 변형된 단순 perovskite 구조를 가졌으며 이때 격자상수 $=3.985\pm0.0005{\AA},\;\alpha=89.5^{circ}$이었다. Mossbauer스펙트럼 분석결과 $Bi_{2/3}La_{1/3}FeO_3$의 Neel온도는 $680\pm3K$임을 알 수 있었다. $Bi_{2/3}La_{1/3}FeO_3$의 이성질체이동 값은 0.27mm/s 값을 가졌으며, 이는 $Bi_{2/3}La_{1/3}FeO_3$.의 Fe 이온이 가지는 이온가는 $Fe^{3+}$의 high spin상태임을 보여주었다. $Bi_{2/3}La_{1/3}FeO_3$의 결정내의 Debye 온도는 $305\pm5K$ 평균 초미세 자기장 $H_{hf}(T)$는 $T/T_N<0.7$영역에서 $[H_{hf}(T)-H_{hf}(0)]/H_{hf}(0)=-0.42(T/T_N)^{3/2}-0.13(T/T_N)^{5/2}$로 spin wave가 결정 내에서 잘 여기 됨을 알 수 있었다.

• 한국지역지리학회지
• /
• 제3권1호
• /
• pp.165-182
• /
• 1997

본 연구는 경남 밀양시 천황산 북사면상에 분포하는 얼음골 일대를 대상으로 얼음골의 형성원인을 개괄하였으며, 얼음골에서 특히 잘 발달하고 있는 talus에 대해서 형태적, 성인적, 지형발달사적 특성을 분석하여 다음과 같은 결론을 얻었다. 첫째, 깊고 넓은 곡저를 가지는 얼음물의 경우 그것의 형성원인은 (1) 특이한 관입구조(다량의 응회암 포함) 또는 (2) 관입이나 분출 이후 냉각 수축과정에서 야기된 함몰와지의 형성으로 인한 지형적 특성으로 추정되나 분명하지는 않다. 둘째, talus의 형태적 특성은 외양이 설상 또는 원추상, 사면경사 $32^{\circ}$ 이상으로 일반적인 경향을 보이지만 talus의 분포밀도는 매우 높다. 세째, talus는 최종빙기 동안의 주빙하적 기후환경하에서 형성되었으며, 그것의 유형은 rock fall talus에 해당된다. 네째, talus의 지형발달단계는 현재 사지형화단계이며 바람이나 유수에 의한 세립물질의 선택적 집적이 있는 곳에서는 식생이 정착하여 식생 피복지가 점차 증가하고 있다.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.308-314
• /
• 2016

Cobalt-, zinc-, and nickel-zinc-substituted nano-size manganese ferrite powders, $MnFe_2O_4$, $Mn_{0.8}Co_{0.2}Fe_2O_4$, $Mn_{0.8}Zn_{0.2}Fe_2O_4$ and $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$, were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently studied. The $MnFe_2O_4$ ferrite powder annealed at temperatures above 523 K exhibited a spinel structure, and the particle size increased as the annealing temperature increased. All ferrites annealed at 773 K showed a single spinel structure, and the lattice constants and particle size decreased with the substitution of Co, Zn, and Ni-Zn. The $M{\ddot{o}}ssbauer$ spectrum of the $MnFe_2O_4$ ferrite powder annealed at 523 K only showed a doublet due to its superparamagnetic phase, and the $M{\ddot{o}}ssbauer$ spectra of the $MnFe_2O_4$, $Mn_{0.8}Co_{0.2}Fe_2O_4$, and $Mn_{0.8}Zn_{0.2}Fe_2O_4$ ferrite powders annealed at 773 K could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of the $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$ ferrite powder annealed at 773 K consisted of two Zeeman sextets and one quadrupole doublet due to its ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explained the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. Relative to pure $MnFe_2O_4$, the saturation magnetizations and coercivities were larger in $Mn_{0.8}Co_{0.2}Fe_2O_4$ and smaller in $Mn_{0.8}Zn_{0.2}Fe_2O_4$, and $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$. These variations could be explained using the site distribution equations, particle sizes and magnetic moments of the substituted ions.

• 자원환경지질
• /
• 제41권1호
• /
• pp.1-14
• /
• 2008

봉상 금-은광상은 백악기 안산암질 래필리응회암 내에 발달된 단층대를 충진한 석영맥광상이다. 이 광상의 광화작용은 단층-각력대에 수반되며 2시기로 구분된다. 1시기는 다시 조기와 말기로 구분되며 주된 광화시기이다. II시기는 광화작용이 관찰되지 않는다. I시기 조기는 모암변질과 천금속 황화광물이 관찰된다. I시기 말기는 금-은광물 정출시기로 자연은, 함은사면동석 및 휘안동은석과 함께 황철석, 섬아연석, 황동석 및 방연석 등의 황화광물이 관찰된다. 유체포유물 자료에 의하면, 광화I시기의 균일화온도와 염농도는 각각 $137{\sim}336^{\circ}C,\;0.0{\sim}10.6wt.%$ NaCl 로서 광화유체가 천수의 혼입에 의한 냉각과 희석이 있었음을 지시한다. 또한, 광화I시기 말기에 관찰되는 광물공생군으로부터 구한 생성온도와 황분압은 $<210^{\circ}C$과 $<10^{-15.4}$ atm를 갖는다. 황(3.4%o 기원은 화성기원과 모암내의 황에서 유래된 것으로 해석된다. 산소{2.9%o과 10.3%o(석영: 7.9%o과 8.9%o, 방해석: 2.9%o과 10.3%o)}, 수소(-75%o) 및 탄소(-7.0%o과 -5.9%o)동위원소값의 자료로 볼 때, 이 광상의 광화유체는 천수 기원의 유체가 주종을 이룬 것으로 보이며 광화작용이 진행됨에 따라 기원이 다른 천수의 혼입이 작용한 것으로 해석할 수 있다.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.40-45
• /
• 2016

Nickel substituted nano-sized ferrite powders, $Co_{1-x}Ni_xFe_2O_4$, $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$), were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently compared. The lattice constants decreased as quantity of nickel substitution increased, while the particle size decreased in $Co_{1-x}Ni_xFe_2O_4$ ferrite but increased for the $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites. For the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$) ferrite powders, the $M{\ddot{o}}ssbauer$ spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of $Mn_{0.8}Zn_{0.1}Ni_{0.1}Fe_2O_4$ consisted of two Zeeman sextets and one single quadrupole doublet due to the ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explain the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. The saturation magnetization decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. The coercivity decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. These variations could thus be explained by using the site distribution equations, particle sizes and spin magnetic moments of the substituted ions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.185.2-185.2
• /
• 2015

Tin Oxide (SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. In addition, it would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. There have been concentrated on the improvement of optical properties, such as conductivity and transparency, by doping Indium Oxide and Gallium Oxide. Recently, with development of fabrication techniques, high-qulaity SnO2 epitaxial thin films have been studied and received much attention to produce the electronic devices such as sensor and light-emitting diode. In this study, powder sputtering method was employed to deposit epitaxial thin films on sapphire (0001) substrates. A commercial SnO2 powder was sputtered. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using XRD, SEM, AFM, and Raman spectroscopy measurements. The details of physical properties of epitaxial SnO2 thin films will be presented.

• 한국환경보건학회지
• /
• 제28권5호
• /
• pp.59-64
• /
• 2002

The photocatalytic decolorization of the Rhodamine B (RhB) was studied using a UV/TiO$_2$ reactor. Yakuri titanium dioxide(anatase) was used as the suspended photocatalyst and proved to be effective for decolorization irradiated with UV light (254 mm). The photocatalyzed dioxide concentrations, light intensity and air flow rates. In 0.01 mM RhB, color could be completely photodegraded after 3 hours. Absorption spectrum of an aqueous solution containing RhB showed a continued diminution of the RhB concentration in the solution bulk : concomitantly, no new absorption peaks appeared. This confirmed the decolorization of RhB, i.e., the break up of the chromopore. The optimum loaded titanium dioxide for the decolorization was 0.75 g/(equation omitted). The light intensity showed exponential decay with distance. The decay of light intensity of RhB solution showed different tendency from TiO$_2$. These results suggested that the photocatalytic decolorization of dyes may be available method for decolorizing in wastewater.

• 한국결정학회지
• /
• 제15권1호
• /
• pp.44-50
• /
• 2004

Spinel structured lithium managanese oxide $(LiMn_2O_4)$ powder with well defined facetted morphology was prepared by precipitation-evaporation method. {111}, {110}, and {100} planes are mainly observed in the $LiMn_2O_4$ powder. And powder shape of tetradecahedron and octahedron was observed depending on the calcinations temperature. The observed powder morphology observed seemed to be related to the nonstoichiometry of the oxygen in the $LiMn_2O_4$ spinel structure. Oxygen nonstoichiometry might be responsible for the Jahn-teller effect and structure transition which in turn affects the surface energy of the {111}, {110}, and {100} planes. Powder shape transition from tetradecahedron to octahedron seemed to be related to the surface energy of the {111}, {110}, and {100} planes with oxygen nonstoichiometry.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.81-81
• /
• 2010

Growth of TiO2 films prepared by atomic layer deposition (ALD) was studied on C fiber. Moreover, adsorption and photocatalytic decomposition of methylene blue on TiO2 thin films were studied. Preferential growth of TiO2 on steps of C surfaces could be identified by scanning electron microscopy (SEM). X-ray Photoelectron Spectroscopy (XPS) showed thickness-dependent positive core level shift of Ti, which can be interpreted in terms of enhanced final state charging for thicker films. Adsorption and photocatalytic behaviors of TiO2 thin films will be discussed in this poster.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.533-536
• /
• 1988

For CMOS, this paper propose a new global routing algorithm in which macrocells and I/O padcells can be treated. Not only predefined feedthrough in base array, but also some polysilicon line which are not assigned as inputs are used to prevent the overflow of nets passing through the row. The signal nets are assigned on their feedthrough by the maze router. By treating macrocells and I/O padcell, the routing from internal to I/O cell can be done automatically and a kind of is constraints in design process can be reduced.