• 한국전자통신학회논문지
• /
• 제14권3호
• /
• pp.519-528
• /
• 2019

현재의 브레이크 시스템은 운동에너지를 열에너지로 변경하여 거의 마찰형 브레이크로 공기 중에 발산하여 제동한다. 시스템 내에는 제동력을 발생시키는 리타더라는 장치가 있다. 전기에너지의 소모를 절약하기 위해 리타더의 제동에너지 일부를 활용하는 리타더의 고속 응답 특성에 관한 고도기술 연구는 이미 선진국에서 진행 중이다. 본 논문에서는 배터리 충전을 위해 리타더에서 발생한 3상 전압을 24V 직류 전압으로 변환하고 실험을 통해 타당성을 검증하는 DC-DC 컨버터를 제안한다.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.735-742
• /
• 2019

이온 선택성 표면이 가지는 파상구조와 전기와류 불안정성 간의 전기동역학적 상호작용을 수치해석을 통하여 연구하였다. 유한요소법을 이용하여 전기장-이온 이동현상-유동장을 완전결합 해석을 하였다. 이를 통해 파상구조가 제공하는 전기와류 생성 기작인 Dukhin's mode의 유효성 및 역할을 제시하였다. Runinstein's mode와 경쟁관계에 놓이는 Dukhin's mode는 (i) 과한계 영역으로의 전이 전압을 낮춰주고 (ii) 혼돈계인 과한계 영역에서 전류를 비선형적으로 증가시켜준다. 또한, (iii) 전기와류 불안정성에서 발생하는 비효율적 혼합의 원인인 고주파수 Fourier 성분을 배제하여 전기와류의 혼합 효율을 상승시켜 준다. 결론적으로, 본 연구에서 제시한 기작은 전기투석, 화학전지 등의 이온 선택성 이동현상 시스템에 대한 에너지 효율적인 기작으로 활용 가능할 것이다.

• International Journal of Computer Science & Network Security
• /
• 제22권4호
• /
• pp.17-26
• /
• 2022

Sensor Nodes play a major role to monitor and sense the variations in physical space in various real-time application scenarios. These nodes are powered by limited battery resources and replacing those resource is highly tedious task along with this it increases implementation cost. Thus, maintaining a good network lifespan is amongst the utmost important challenge in this field of WSN. Currently, energy efficient routing techniques are considered as promising solution to prolong the network lifespan where multi-hop communications are performed by identifying the most energy efficient path. However, the existing scheme suffer from performance related issues. To solve the issues of existing techniques, a novel hybrid technique by merging particle swarm optimization and game theory model is presented. The PSO helps to obtain the efficient number of cluster and Cluster Head selection whereas game theory aids in finding the best optimized path from source to destination by utilizing a path selection probability approach. This probability is obtained by using conditional probability to compute payoff for agents. When compared to current strategies, the experimental study demonstrates that the proposed GTPSO strategy outperforms them.

• 융합경영연구
• /
• 제10권4호
• /
• pp.13-24
• /
• 2022

Purpose: Although numerous research has covered content on trends in the adoption and use of wearable devices, their uses across several sectors such as healthcare, gaming, and fashion, there seems to be a considerable paucity with regard to empirical research focusing on the solutions for factors that undermine the effectiveness of wearable devices in healthcare. The present research aims to highlight what has been covered on wearable devices in healthcare while highlighting the limitations for future research. Research design, data, and methodology -The present authors conducted one of the most famous qualitative literature approach which has been called as PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) statement. The selecting criteria for eligible prior studies was estimated by whether studies are suitable for the current research, identifying they are peer-reviewed and issued by notable publishers between 2017 and 2022. Result - Our results indicated that (1) Increasing the Affordability and User Education on Wearable Devices in Healthcare (2) Tackling the Technological Issues in Wearable Devices to Promote Healthcare Delivery (3) Solving Security and Privacy Issues Associated with Wearable Devices (4) Promoting Standards and Appropriate Regulations for Wearable Devices. Conclusion - To add, resolving the technological issues associated with wearable devices in healthcare will ensure that the new devices in the market will have longer battery life, multiple functions, and enhanced accuracy, thus ensuring that patients receive better care. Necessary interventions are taken on time to avoid any deleterious consequences such as proliferating mortality rates among the different patient groups.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.487-494
• /
• 2022

Anodizing is a typical electrochemical surface treatment method that can improve the corrosion and insulating properties of aluminum alloys. The anodization process can obtain a dense structure. It can be used to artificially grow the thickness of an anodization film. Aluminum 3003 alloy used in this study is the most commonly used alloy for batteries due to its high strength and excellent formability as well as its weldability and corrosion resistance. Aluminum 3003 alloy was anodized at 0 ℃ with 0.3 M oxalic acid at 20 V, 40 V, or 60 V for 1 hour, 6 hours, or 12 hours. As a result of analyzing the composition of each specimen with an Energy Dispersive Spectrometer (EDS), aluminum was converted into an oxide film. The thickness of the formed anodization film increased when the applied voltage and anodization time increased. High corrosion potential values and low corrosion current density values were observed for the thickest oxide layer. The anodization film formed by anodization acted as a protective layer. The electrical resistance increased as the applied voltage and anodization time increased.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4385-4399
• /
• 2021

The Internet of Things (IoT) eHealth systems composed by Wireless Body Area Network (WBAN) has emerged recently. Sensor nodes are placed around or in the human body to collect physiological data. WBAN has many different applications, for instance health monitoring. Since the limitation of the size of the battery, besides speed, reliability, and accuracy; design of WBAN protocols should consider the energy efficiency and time delay. To solve these problems, this paper adopt the end-edge-cloud orchestrated network architecture and propose a transmission based on reinforcement algorithm. The priority of sensing data is classified according to certain application. System utility function is modeled according to the channel factors, the energy utility, and successful transmission conditions. The optimization problem is mapped to Q-learning model. Following this online power control protocol, the energy level of both the senor to coordinator, and coordinator to edge server can be modified according to the current channel condition. The network performance is evaluated by simulation. The results show that the proposed power control protocol has higher system energy efficiency, delivery ratio, and throughput.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2209-2221
• /
• 2023

As the supply of electric vehicles increases, research on wireless charging methods for convenience has been increasing. Because the electric vehicle wireless transmission device is installed on the ground and the electric vehicle battery is installed on the floor of the vehicle, the transmission and reception antennas are approximately 15-30 cm away, and thus strong magnetic fields are exposed during wireless charging. When a metallic foreign object is placed in the magnetic field area, an eddy current is induced to the metallic foreign object, and heat is generated, creating danger of fire and burns. Therefore, this study proposes a method to detect metallic foreign objects in the magnetic field area of a wireless electric vehicle charging system. An active detection-only coil array was used, and an LC resonance circuit was constructed for the frequency of the supply power signal. When a metallic foreign object is inserted into the charging zone, the characteristics of the resonance circuit are broken, and the magnitude and phase of the voltage signal at both ends of the capacitor are changed. It was confirmed that the proposed method has about 1.5 times more change than the method of comparing the voltage magnitude at one node.

• 공학기술논문지
• /
• 제5권4호
• /
• pp.349-353
• /
• 2012

Recently, Mobile multimedia equipments as smart phone and tablet pc requirement is increasing and this market is also being expanded. These mobile equipments require large multi-media function, so more power consumption is required. For these reasons, the needs of power management IC as switching type dc-dc converter and linear regulator have increased. DC-DC buck converter become more important in power management IC because the operating voltage of VLSI system is very low comparing to lithium-ion battery voltage. There are many people to be concerned about digital DC-DC converter without using external passive device recently. Digital controlled DC-DC converter is essential in mobile application to various external circumstance. This paper proposes the DC-DC Buck Converter using the AVR RISC 8-bit micro-processor control. The designed converter receives the input DC 18-30 [V] and the output voltage of DC-DC Converter changes by the feedback circuit using the A/D conversion function. Duty ratio is adjusted to maintain a constant output voltage 12 [V]. Proposed converter using the micro-processor control was compared to a typical boost converter. As a result, the current loss in the proposed converter was reduced about 10.7%. Input voltage and output voltage can be displayed on the LCD display to see the status of the operation.

• Journal of Electrochemical Science and Technology
• /
• 제14권4호
• /
• pp.320-325
• /
• 2023

In Li-ion batteries, a thick electrode is advantageous for lowering the inactive current collector portion and obtaining a high energy density. One of the critical failure mechanisms of thick electrodes is inhomogeneous lithiation and delithiation owing to the axial location of the electrode. In this study, it was confirmed that the top layer of the composite electrode contributes more to the charging step owing to the high ionic transport from the electrolyte. A high-loading multilayered electrode containing LiFePO₄ (LFP) and LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) was developed to overcome the inhomogeneous electrochemical reactions in the electrode. The electrode laminated with LFP on the top and NCM811 on the bottom showed superior cyclability compared to the electrode having the reverse stacking order or thoroughly mixed. This improvement is attributed to the structural and interfacial stability of LFP on top of the thick electrode in an electrochemically harsh environment.

• Journal of Electrochemical Science and Technology
• /
• 제14권4호
• /
• pp.369-376
• /
• 2023

The quick-charging performance of SiO electrodes is evaluated with a focus on solid electrolyte interphase (SEI)-reinforcing effects. The study reveals that the incorporation of fluoroethylene carbonate (FEC) into the SiO electrode significantly reduced the electrode fatigue, which is from the the viscoelastic properties of the FEC-derived SEI film. The impact of FEC is attributed to its ability to minimize the mechanical failure of the electrode caused by additional electrolyte decomposition. This beneficial outcome arises from volumetric stain-tolerant characteristics of the FEC-derived SEI film, which limited exposure of the bare SiO surface during 0.5 C-rate cycling. Notably, FEC greatly improves Li deposition during quick-charge cycles following aging at 0.5 C-rate cycling due to its ability to maintain a strong electrical connection between active materials and the current collector, even after extended cycling. Given these findings, we assert that mitigating SEI layer deterioration, which compromises the electrode structure, is vital. Hence, enhancing the interfacial attributes of the SiO electrode becomes crucial for maintaining kinetic efficiency of battery system.